Manufacturing is undergoing major transformation due to the unforeseen challenges arising from the current trend of miniaturization, the emergence of new materials and the growing interaction between biologists and engineers to learn more from nature and living objects.Traditionally, a "top-down" approach has been used in manufacturing. Recently, engineers and scientists have begun exploring "bottom-up" approaches for manufacturing today's highly complex products. Further, these emerging processes are aimed to improve process efficiency and product quality.
由于当前的小型化趋势、新材料的出现以及生物学家和工程师之间为从自然界和生物体中学习更多知识而不断增加的互动带来了不可预见的挑战，制造业正在经历重大变革。传统上，“自上而下”的方法已经被用于制造业。最近，工程师和科学家开始探索制造当今高度复杂产品的“自下而上”方法。此外，这些新兴工艺旨在提高工艺效率和产品质量。
On the periodicity of fixed-abrasive planetary lapping based on a generic model
来源期刊：Journal of Manufacturing ProcessesDOI：10.1016/J.JMAPRO.2019.05.036
Numerical studies on explosive welding with ANFO by using a density adaptive SPH method
来源期刊：Journal of Manufacturing ProcessesDOI：10.1016/J.JMAPRO.2019.03.039
Investigation of micro-textured cutting tools used for face turning of alloy 718 with high-pressure cooling
来源期刊：Journal of Manufacturing ProcessesDOI：10.1016/J.JMAPRO.2018.12.023
Joining of Zr60Ti17Cu12Ni11 bulk metallic glass and aluminum 1060 by underwater explosive welding method
来源期刊：Journal of Manufacturing ProcessesDOI：10.1016/J.JMAPRO.2019.06.035
Study on key factors influencing the surface generation in rotary ultrasonic grinding for hard and brittle materials
来源期刊：Journal of Manufacturing ProcessesDOI：10.1016/J.JMAPRO.2019.01.046
Development of a processing route for Ti-6Al-4V forgings based on preforms made by selective laser melting
来源期刊：Journal of Manufacturing ProcessesDOI：10.1016/J.JMAPRO.2018.11.011
Microstructure and surface analysis of friction stir processed Ti-6Al-4V plates manufactured by electron beam melting
来源期刊：Journal of Manufacturing ProcessesDOI：10.1016/J.JMAPRO.2018.12.015
Effect of surface texturing on tribological performance of sliding guideway under boundary lubrication
来源期刊：Journal of Manufacturing ProcessesDOI：10.1016/j.jmapro.2019.09.031
How alumina nanoparticles impact surface characteristics of Al7175 in roller burnishing process
来源期刊：Journal of Manufacturing ProcessesDOI：10.1016/J.JMAPRO.2019.01.027
Influence of friction stir processing on microstructure and tensile behavior of AA6061/Al3Zr cast aluminum matrix composites
来源期刊：Journal of Manufacturing ProcessesDOI：10.1016/J.JMAPRO.2018.12.039
Numerical modelling on cooling assisted friction stir welding of dissimilar Al-Cu joint
来源期刊：Journal of Manufacturing ProcessesDOI：10.1016/j.jmapro.2019.09.020
Influence of pulse energy density in micro laser weld of crack sensitive Al alloy sheets
来源期刊：Journal of Manufacturing ProcessesDOI：10.1016/J.JMAPRO.2018.12.035
Improvement in joint strength and material joinability in clinched joints by electromagnetically assisted clinching
来源期刊：Journal of Manufacturing ProcessesDOI：10.1016/J.JMAPRO.2019.04.003
Assessment of the suitability of industrial robots for the machining of carbon-fiber reinforced polymers (CFRPs)
来源期刊：Journal of Manufacturing ProcessesDOI：10.1016/J.JMAPRO.2018.11.022
Simulation research about rubber pad forming of corner channel with convex or concave mould
来源期刊：Journal of Manufacturing ProcessesDOI：10.1016/J.JMAPRO.2019.03.008
Correlating nano-scale surface replication accuracy and cavity temperature in micro-injection moulding using in-line process control and high-speed thermal imaging
来源期刊：Journal of Manufacturing ProcessesDOI：10.1016/j.jmapro.2019.08.017
An experimental and computational study on the feasibility of bio-dielectrics for sustainable electrical discharge machining
来源期刊：Journal of Manufacturing ProcessesDOI：10.1016/J.JMAPRO.2019.04.005
Rapid surface quality assessment of green 3D printed metal-binder parts
来源期刊：Journal of Manufacturing ProcessesDOI：10.1016/J.JMAPRO.2019.01.032
Effects of welding pressure on high-power ultrasonic spot welding of Cu/Al dissimilar metals
来源期刊：Journal of Manufacturing ProcessesDOI：10.1016/j.jmapro.2019.07.018
Experimental investigation of support plates’ influences on tool wear in micro-drilling of CFRP laminates
来源期刊：Journal of Manufacturing ProcessesDOI：10.1016/J.JMAPRO.2019.01.018
Tribological performance of SiO2-based nanofluids in minimum quantity lubrication grinding of Si3N4 ceramic
来源期刊：Journal of Manufacturing ProcessesDOI：10.1016/J.JMAPRO.2019.03.024
Investigations on induced residual stresses, mechanical and metallurgical properties of CO2 laser beam and pulse current gas tungsten arc welded SMO 254
来源期刊：Journal of Manufacturing ProcessesDOI：10.1016/J.JMAPRO.2019.05.044
An ultrafast 2-D non-resonant cutting tool for texturing micro-structured surfaces
来源期刊：Journal of Manufacturing ProcessesDOI：10.1016/j.jmapro.2019.10.023
Three-dimensional thermal-mechanical analysis of retractable pin tool friction stir welding process
来源期刊：Journal of Manufacturing ProcessesDOI：10.1016/J.JMAPRO.2019.03.022
A novel hydrodynamic cavitation abrasive technique for internal surface finishing
来源期刊：Journal of Manufacturing ProcessesDOI：10.1016/j.jmapro.2019.08.014
Monitoring tip-based nanomachining process by time series analysis using support vector machine
来源期刊：Journal of Manufacturing ProcessesDOI：10.1016/J.JMAPRO.2019.01.011
Optimization of magnetic oscillation system and microstructural characteristics in arc welding of Al/Mg alloys
来源期刊：Journal of Manufacturing ProcessesDOI：10.1016/J.JMAPRO.2019.02.008
Effects of welds distribution and high-low temperature humidity alternating aging on sealing performance of weld-bonded stainless steel structures
来源期刊：Journal of Manufacturing ProcessesDOI：10.1016/j.jmapro.2019.10.017
Prediction of liquid nitrogen die cooling effect on the extrusion process parameters by means of FE simulations and experimental validation
来源期刊：Journal of Manufacturing ProcessesDOI：10.1016/J.JMAPRO.2019.04.002
Investigation of the performance of 248 nm excimer laser assisted photoresist removal process in gaseous media by response surface methodology and artificial neural network
来源期刊：Journal of Manufacturing ProcessesDOI：10.1016/J.JMAPRO.2019.01.002
Resistance ceramic-filled annular welding of thin steel sheets
来源期刊：Journal of Manufacturing ProcessesDOI：10.1016/J.JMAPRO.2019.07.043
Evaluation of removal characteristics of bonnet polishing tool using polishing forces collected online
来源期刊：Journal of Manufacturing ProcessesDOI：10.1016/j.jmapro.2019.03.029
Multiphysics study in air-shielding electrochemical micromachining
来源期刊：Journal of Manufacturing ProcessesDOI：10.1016/J.JMAPRO.2019.05.019
The influence of combined hydrostatic extrusion and rolling on the microstructure, texture and mechanical properties of Al-Li alloys
来源期刊：Journal of Manufacturing ProcessesDOI：10.1016/j.jmapro.2019.09.042
Co-extrusion of Zircaloy-2 and Zr-Sn alloy for double clad tube manufacturing: Numerical simulation and experimental validation
来源期刊：Journal of Manufacturing ProcessesDOI：10.1016/J.JMAPRO.2019.01.048
Feasibility study on application of hot forming quenching to patchwork blanks using two-stage refilled friction stir spot welding
来源期刊：Journal of Manufacturing ProcessesDOI：10.1016/J.JMAPRO.2019.03.012
Mechanical strength enhancement of ultrasonic metal welded Cu/Cu joint by Cu nanoparticles interlayer
来源期刊：Journal of Manufacturing ProcessesDOI：10.1016/J.JMAPRO.2019.01.014
Experimental and crystal plasticity evaluation of grain size effect on formability of austenitic stainless steel sheets
来源期刊：Journal of Manufacturing ProcessesDOI：10.1016/j.jmapro.2019.09.035
Explicit error modeling of dynamic thermal errors of heavy machine tool frames caused by ambient temperature fluctuations
来源期刊：Journal of Manufacturing ProcessesDOI：10.1016/j.jmapro.2019.10.018
Effect of insert materials on microstructure and mechanical properties of Al/Mg bimetal produced by a novel solid-liquid compound process
来源期刊：Journal of Manufacturing ProcessesDOI：10.1016/j.jmapro.2019.09.026
Development of novel MIG welding process with duplex current feeding
来源期刊：Journal of Manufacturing ProcessesDOI：10.1016/j.jmapro.2019.09.009
Research on underwater flux cored arc cutting mechanism based on simulation of kerf formation
来源期刊：Journal of Manufacturing ProcessesDOI：10.1016/J.JMAPRO.2019.03.010
Circular trajectory weaving welding control algorithm based on space transformation principle
来源期刊：Journal of Manufacturing ProcessesDOI：10.1016/j.jmapro.2019.08.027
Extraction of surface curvatures from tool path data and prediction of cutting forces in the finish milling of sculptured surfaces
来源期刊：Journal of Manufacturing ProcessesDOI：10.1016/J.JMAPRO.2019.07.008
Numerical and experimental investigation on friction welding of austenite stainless steel and middle carbon steel
来源期刊：Journal of Manufacturing ProcessesDOI：10.1016/j.jmapro.2019.09.016
Microwave versus conventional porcelain firing: Temperature measurement
来源期刊：Journal of Manufacturing ProcessesDOI：10.1016/J.JMAPRO.2019.03.038
Welding of fully –Austenitic stainless steel using pcgtaw process; Part I: Bead structure
来源期刊：Journal of Manufacturing ProcessesDOI：10.1016/J.JMAPRO.2018.12.037
Development of an open-sourced automated ultrasonic-assisted soldering system
来源期刊：Journal of Manufacturing ProcessesDOI：10.1016/j.jmapro.2019.09.007
Numerical studying and experimental investigation: Effect of Reynolds number on performance measures of EDM with high speed flushing
来源期刊：Journal of Manufacturing ProcessesDOI：10.1016/j.jmapro.2019.10.035
Experimental and numerical investigation on the interference of diamond grains in double-grain grinding silicon carbide ceramics
来源期刊：Journal of Manufacturing ProcessesDOI：10.1016/J.JMAPRO.2019.06.014
