Wear journal is dedicated to the advancement of basic and applied knowledge concerning the nature of wear of materials. Broadly, topics of interest range from development of fundamental understanding of the mechanisms of wear to innovative solutions to practical engineering problems. Authors of experimental studies are expected to comment on the repeatability of the data, and whenever possible, conduct multiple measurements under similar testing conditions. Further, Wear embraces the highest standards of professional ethics, and the detection of matching content, either in written or graphical form, from other publications by the current authors or by others, may result in rejection.
《磨损杂志》致力于提高有关材料磨损性质的基础和应用知识。从广义上讲，感兴趣的主题范围从对磨损机制的基本理解到对实际工程问题的创新解决方案。希望实验研究的作者对数据的可重复性进行评论，并尽可能在相似的测试条件下进行多次测量。此外， Wear遵守最高的职业道德标准，如果从当前作者或其他人的其他出版物中检测到匹配的内容，无论是书面形式还是图形形式，都可能导致拒绝。
Two-body abrasion resistance of high-carbon high-silicon steel: Metastable austenite vs nanostructured bainite
来源期刊：WearDOI：10.1016/J.WEAR.2018.11.003
Vibration-based updating of wear prediction for spur gears
来源期刊：WearDOI：10.1016/J.WEAR.2019.01.017
Effect of coating thickness on the tool wear performance of low stress TiAlN PVD coating during turning of compacted graphite iron (CGI)
来源期刊：WearDOI：10.1016/J.WEAR.2019.01.062
Wear behavior of self-lubricating boride layers produced on Inconel 600-alloy by laser alloying
来源期刊：WearDOI：10.1016/J.WEAR.2018.12.026
Fade behaviour of copper-based brake pad during cyclic emergency braking at high speed and overload condition
来源期刊：WearDOI：10.1016/J.WEAR.2019.01.126
High temperature tribology of CuMoTaWV high entropy alloy
来源期刊：WearDOI：10.1016/J.WEAR.2018.12.085
Investigation on basic friction and wear mechanisms within hot stamping considering the influence of tool steel and hardness
来源期刊：WearDOI：10.1016/J.WEAR.2018.12.018
On the origins of third-body particle formation during adhesive wear
来源期刊：WearDOI：10.1016/J.WEAR.2018.12.060
High temperature wear mechanisms in thermally oxidized titanium alloys for engine valve applications
来源期刊：WearDOI：10.1016/J.WEAR.2018.12.041
Investigation of erosion temperature in micro-blasting
来源期刊：WearDOI：10.1016/J.WEAR.2018.12.073
Microstructure and wear properties of TiC-strengthened high-manganese steel matrix composites fabricated by hypereutectic solidification
来源期刊：WearDOI：10.1016/J.WEAR.2019.202970
Crack behaviors of optical glass BK7 during scratch tests under different tool apex angles
来源期刊：WearDOI：10.1016/J.WEAR.2019.05.023
Characterization of interfacial shear strength and its effect on ploughing behaviour in single-asperity sliding
来源期刊：WearDOI：10.1016/j.wear.2019.203042
Physical characterization and wear behavior of laser processed and PVD coated WC/Co in dry sliding and dry turning processes
来源期刊：WearDOI：10.1016/J.WEAR.2019.03.008
Tribology of incoloy 800HT for nuclear reactors under helium environment at elevated temperatures
来源期刊：WearDOI：10.1016/J.WEAR.2019.203022
In-situ Ti-6Al-4V/TiC composites synthesized by reactive spark plasma sintering: processing, microstructure, and dry sliding wear behaviour
来源期刊：WearDOI：10.1016/J.WEAR.2019.202944
The mechanism of erosion-corrosion of API X65 steel under turbulent slurry flow: Effect of nominal flow velocity and oxygen content
来源期刊：WearDOI：10.1016/j.wear.2019.203053
Wear in cold rolling milling rolls: A methodological approach
来源期刊：WearDOI：10.1016/J.WEAR.2018.12.005
Prediction of sand erosion in CFD with dynamically deforming pipe geometry and implementing proper treatment of turbulence dispersion in particle tracking
来源期刊：WearDOI：10.1016/J.WEAR.2019.01.018
On the diffusion wear of cemented carbides in the turning of AISI 316L stainless steel
来源期刊：WearDOI：10.1016/J.WEAR.2019.05.010
Effect of the braking pressure variation on disc brake squeal of a railway vehicle: Test measurement and finite element analysis
来源期刊：WearDOI：10.1016/J.WEAR.2018.12.051
Experimental research on tribological and vibration performance of water-lubricated hydrodynamic thrust bearings used in marine shaft-less rim driven thrusters
来源期刊：WearDOI：10.1016/J.WEAR.2018.11.017
Experimental and numerical study of erosion in a non-Newtonian hydraulic fracturing fluid
来源期刊：WearDOI：10.1016/J.WEAR.2018.12.080
Mechanisms of die wear and wear-induced damage at the trimmed edge of high strength steel sheets
来源期刊：WearDOI：10.1016/J.WEAR.2019.01.113
Effects of thread groove width in cylinder liner surface on performances of diesel engine
来源期刊：WearDOI：10.1016/J.WEAR.2018.12.070
Influence of organic modified silica coatings on the tribological properties of elastomeric compounds
来源期刊：WearDOI：10.1016/J.WEAR.2019.202987
Effect of shoe braking on wear and fatigue damage of various railway wheel steels for high speed applications
来源期刊：WearDOI：10.1016/J.WEAR.2019.203005
Tribological performance assessment of lamellar and compacted graphite irons in lubricated ring-on-cylinder test
来源期刊：WearDOI：10.1016/J.WEAR.2019.02.020
Mechanism-based wear models for plastic injection moulds
来源期刊：WearDOI：10.1016/j.wear.2019.203105
Effect of fretting wear on crack initiation for cylinder-plate and punch-plane tests
来源期刊：WearDOI：10.1016/J.WEAR.2018.12.059
Comparative study on fretting wear behaviors of Alloy 600MA in dry air and deionized water conditions
来源期刊：WearDOI：10.1016/J.WEAR.2018.11.029
Dry sliding wear performance and behaviour of powder bed fusion processed Ti–6Al–4V alloy
来源期刊：WearDOI：10.1016/j.wear.2019.203103
Evolution in microstructure and compression behaviour of a metallic sintered friction material after braking
来源期刊：WearDOI：10.1016/J.WEAR.2019.202947
Predicting erosion in a non-Newtonian shear-thinning jet flow with validated CFD models from PIV and PTV measurements
来源期刊：WearDOI：10.1016/J.WEAR.2018.12.027
Effect of surface deformation on erosion prediction
来源期刊：WearDOI：10.1016/J.WEAR.2019.04.019
A novel acceleration-controlled random vibration fretting test methodology: From classical sinusoidal to Gaussian random excitation
来源期刊：WearDOI：10.1016/j.wear.2019.203050
Fretting friction and wear of steel wires in tension-torsion and helical contact form
来源期刊：WearDOI：10.1016/J.WEAR.2019.202946
The role of cross-linking in the scratch resistance of organic coatings : An investigation using Atomic Force Microscopy
来源期刊：WearDOI：10.1016/J.WEAR.2018.11.027
Topography studies of concrete abraded with ice
来源期刊：WearDOI：10.1016/J.WEAR.2019.04.017
Wear mode control of polydimethylsiloxane (PDMS) by load and composition
来源期刊：WearDOI：10.1016/j.wear.2019.203066
Review of the API RP 14E erosional velocity equation: Origin, applications, misuses, limitations and alternatives
来源期刊：WearDOI：10.1016/J.WEAR.2019.01.119
Low temperature plasma nitriding of a Co30Cr19Fe alloy for improving cavitation erosion resistance
来源期刊：WearDOI：10.1016/J.WEAR.2019.01.019
Assessment of abrasive powder behaviour during impact-abrasive wear of PCD elements
来源期刊：WearDOI：10.1016/J.WEAR.2019.03.024
The effects of substrate dilution on the microstructure and wear resistance of PTA Cu-Al-Fe aluminium bronze coatings
来源期刊：WearDOI：10.1016/j.wear.2019.203102
Sliding wear of a self-mated thermally sprayed chromium oxide coating in a simulated PWR water environment
来源期刊：WearDOI：10.1016/J.WEAR.2018.12.058
Fretting behaviors of a steel up to very high cycle fatigue
来源期刊：WearDOI：10.1016/j.wear.2019.203078
Effect of relative humidity on the tribological/conductive properties of Cu/Cu rolling contact pairs
来源期刊：WearDOI：10.1016/J.WEAR.2019.203023
Tribological response of multilayered gold nickel coating deposited on fine turned surfaces
来源期刊：WearDOI：10.1016/J.WEAR.2019.01.024
Sliding friction on particle filled epoxy: Developing a quantitative model for complex coatings
来源期刊：WearDOI：10.1016/J.WEAR.2018.11.007
Particle characterisation of rail sands for understanding tribological behaviour
来源期刊：WearDOI：10.1016/J.WEAR.2019.202960
