The Journal of Process Mechanical Engineering publishes high-quality, peer-reviewed papers covering a broad area of mechanical engineering activities associated with the design and operation of process equipment.
Analysis of natural convective flow of non-Newtonian fluid under the effects of nanoparticles of different materials
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical EngineeringDOI：10.1177/0954408918787122
Experimental investigations on R430A as a drop-in substitute for R134a in domestic refrigerators
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical EngineeringDOI：10.1177/0954408918796369
Assembly sequence planning using soft computing methods: A review
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical EngineeringDOI：10.1177/0954408918764459
Design and development of submerged arc welding fluxes using TiO2-SiO2-CaO and SiO2-CaO-Al2O3 flux system
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical EngineeringDOI：10.1177/0954408918794036
Entropy generation and heat transport analysis of Casson fluid flow with viscous and Joule heating in an inclined porous microchannel
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical EngineeringDOI：10.1177/0954408919849987
Experimental and numerical investigation of the transient characteristics and volute casing wall pressure fluctuations of a single-blade pump
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical EngineeringDOI：10.1177/0954408918780524
Experimental studies on graphite powder-mixed electro-discharge machining of Inconel 718 super alloys: Comparison with conventional electro-discharge machining
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical EngineeringDOI：10.1177/0954408918787104
Numerical investigation of fluid flow and heat transfer characteristics in novel circular wavy microchannel
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical EngineeringDOI：10.1177/0954408918820757
Analysis of mixing performances in microchannel with obstacles of different aspect ratios
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical EngineeringDOI：10.1177/0954408919826748
Multiple slip effects on magnetic-Carreau fluid in a suspension of gyrotactic microorganisms over a slendering sheet
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical EngineeringDOI：10.1177/0954408918776723
Machinability of AA7075-T6/carbon nanotube surface composite fabricated by friction stir processing
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical EngineeringDOI：10.1177/0954408918809618
Modeling the growth of a vapor film formed in contact between a hot metal sphere and water in pressure vessels
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical EngineeringDOI：10.1177/0954408918760894
Modeling of surface roughness in the magnetorheological cylindrical finishing process
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical EngineeringDOI：10.1177/0954408917746354
Numerical analysis of transient characteristics of a bulb hydraulic turbine during runaway transient process
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical EngineeringDOI：10.1177/0954408918811548
Multi-criteria optimization of weld bead in pulsed Nd:YAG laser welding of stainless steel 316
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical EngineeringDOI：10.1177/0954408918756654
Transient Dean flow in a channel with suction/injection: A semi-analytical approach
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical EngineeringDOI：10.1177/0954408919825718
Charge-based hysteresis compensation in low impedance piezoelectric actuators by a modified Prandtl–Ishlinskii model
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical EngineeringDOI：10.1177/0954408917743391
An analytical model of burnishing forces using slab method
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical EngineeringDOI：10.1177/0954408918781481
Effect of variation of cylindrical pin fins height on the overall performance of microchannel heat sink
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical EngineeringDOI：10.1177/0954408918821777
A modified firefly algorithm to maximize heat dissipation of a rectangular porous fin in heat exchangers exposed to both convective and radiative environment
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical EngineeringDOI：10.1177/0954408919861244
Thermal and water ageing effect on mechanical, rheological and morphological properties of glass-fibre-reinforced poly(oxymethylene) composite
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical EngineeringDOI：10.1177/0954408918770059
Crosswise stream of methanol–iron oxide (CH3OH–Fe3O4) with temperature-dependent viscosity and suction/injection effects
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical EngineeringDOI：10.1177/0954408918821780
Modeling and prediction of metallic powder behavior in explosive compaction process by using genetic programming method based on dimensionless numbers
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical EngineeringDOI：10.1177/0954408918761223
Analysis of vibration signals to quantify displacement amplitude in the monitoring of vibration-assisted turning
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical EngineeringDOI：10.1177/0954408917742196
Effect of specimen size and ball size on breakage throughput in the drop-weight test
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical EngineeringDOI：10.1177/0954408918765293
Dynamic analysis of an open-loop proportional valve controlled hydrostatic drive
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical EngineeringDOI：10.1177/0954408919861247
Effects of a flow mode transition on natural convection heat transfer in a heat tracing enclosure
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical EngineeringDOI：10.1177/0954408918764456
A preventive maintenance policy for a pull system with degradation and failures considering product quality
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical EngineeringDOI：10.1177/0954408918784414
Thermohydraulic optimization of triple concentric-tube heat exchanger: A multi-objective approach
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical EngineeringDOI：10.1177/0954408918779232
Effect of bed particle size and temperature variation on the minimum fluidisation velocity: A comparison with minimum fluidisation velocity correlations for bubbling fluidised bed designs
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical EngineeringDOI：10.1177/0954408918821769
Prediction model to estimate the specific energy and product particle size distribution of semi-autogenous mill
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical EngineeringDOI：10.1177/0954408918783406
Research on multi-objective optimization of switched flux motor based on improved NSGA-II algorithm
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical EngineeringDOI：10.1177/0954408919864185
Study of the pressure drop in dust scrubber affected by liquid flowability
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical EngineeringDOI：10.1177/0954408919836361
Simulation and experiment study of the self-excited oscillating mixer with abrasive jet used for the descaling of rusty steel
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical EngineeringDOI：10.1177/0954408919841189
Thermal energy analysis on liquid desiccant air conditioning system at different desiccant solution parameters
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical EngineeringDOI：10.1177/0954408919825721
Vibration analysis and control of a screw compressor outlet piping system
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical EngineeringDOI：10.1177/0954408918763561
Steady-state performance investigation of open-circuit hydrostatic drives used in the rotary head of drill machine
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical EngineeringDOI：10.1177/0954408917738973
Solution for the torsional vibration of the compressor shaft system with flexible coupling based on a sensitivity study
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical EngineeringDOI：10.1177/0954408918811014
Analytical solution to orifice design in a rotary valve controlled electro-hydraulic vibration exciter for high-frequency sinusoidal vibration waveform
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical EngineeringDOI：10.1177/0954408919831123
Analysis of the metal-to-metal contact flange joint subject to external bending moment
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical EngineeringDOI：10.1177/0954408918774771
Time-varying stiffness model of spur gear considering the effect of surface morphology characteristics
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical EngineeringDOI：10.1177/0954408918775955
Multi-physics simulation of in situ microwave casting of 7039 Al alloy inside different applicators and cast microstructure
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical EngineeringDOI：10.1177/0954408918781479
Study on residual stresses caused by underwater friction stir welding: FE modeling and ultrasonic measurement
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical EngineeringDOI：10.1177/0954408917751963
Optimum waste heat recovery from diesel engines: Thermo-economic assessment of nanofluid-based systems using a robust evolutionary approach
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical EngineeringDOI：10.1177/0954408917743373
Energy saving analysis of the hydrostatic drives used in the rotary head system of the blast hole drill rig
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical EngineeringDOI：10.1177/0954408919836375
New approach integrating the health, safety, and environment systems for the maintenance function in industries
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical EngineeringDOI：10.1177/0954408918794560
Reduction of steady flow torques in a single-stage rotary servo valve
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical EngineeringDOI：10.1177/0954408918793402
Investigation of the hardness improvement for Al-A380 alloy using the controlled atmosphere in the mechanical stirring casting method
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical EngineeringDOI：10.1177/0954408918773526
Limiting thermal characteristics for flow of non-Newtonian fluids between asymmetrically heated parallel plates: An analytical study
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical EngineeringDOI：10.1177/0954408918814978
Simulation analysis and experimental research of a sampling valve for the seafloor natural gas hydrates survey
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical EngineeringDOI：10.1177/0954408919847838
