The Archives of Metallurgy and Materials is covered in the following Institute for Scientific Information products: SciSearch (the Science Citation Index - Expanded), Research Alert, Materials Science Citation Index, and Current Contents / Engineering, Computing and Technology. Articles published in the Archives of Metallurgy and Materials are also indexed or abstracted by Cambridge Scientific Abstracts.
冶金和材料档案包含在以下科学信息研究所产品中：SciSearch（科学引文索引-扩展）、研究警报、材料科学引文索引和当前目录/工程、计算和技术。发表在冶金学和材料档案中的文章也被剑桥科学文摘索引或摘要。
The Influence of the Angle of Working Part of Die on the Zinc Coating Thickness and Mechanical Properties of Medium Carbon Steel Wires
来源期刊：Archives of Metallurgy and MaterialsDOI：10.24425/AMM.2019.130093
Impact of Tool Magnetization on Changes in the Surface Layer of Forging Tools
来源期刊：Archives of Metallurgy and MaterialsDOI：10.24425/AMM.2019.126254
Selection of hardening technology of moulding sand with hydrated sodium silicate binder devoted to aluminum alloys ablation casting
来源期刊：Archives of Metallurgy and MaterialsDOI：10.24425/AMM.2019.126260
The influence of moulding sand type on mechanical and thermal deformation
来源期刊：Archives of Metallurgy and MaterialsDOI：10.24425/AMM.2019.126258
Optical and structural properties of Cu2O thin film as active layer in solar cells prepared by DC reactive magnetron sputtering
来源期刊：Archives of Metallurgy and MaterialsDOI：10.24425/AMM.2019.126244
Mechanical properties and fracture analysis of AlCu4MgSi alloy ingots obtained by horizontal continuous casting
来源期刊：Archives of Metallurgy and MaterialsDOI：10.24425/AMM.2019.126225
Influence of Different Plants Extracts on Silver Nanopar ticles Green Synthesis
来源期刊：Archives of Metallurgy and MaterialsDOI：10.24425/AMM.2019.127596
Effect of Powder Shape and Sintering Temperature on the Preparation of Ni-Based Porous Metal
来源期刊：Archives of Metallurgy and MaterialsDOI：10.24425/AMM.2019.129472
Effect of powder grain size and titania content on mechanical and tribological properties of plasma sprayed Al2O3-TiO2 ceramic coatings
来源期刊：Archives of Metallurgy and MaterialsDOI：10.24425/AMM.2019.126217
Thermogravimetric analysis of modified cellulose mixtures in air
来源期刊：Archives of Metallurgy and MaterialsDOI：10.24425/AMM.2019.126231
The numerical simulation of aviation structure joined by FSW
来源期刊：Archives of Metallurgy and MaterialsDOI：10.24425/AMM.2019.126264
Properties of tool steel with Cr/CrN type hybrid coatings, obtained by PVD method
来源期刊：Archives of Metallurgy and MaterialsDOI：10.24425/AMM.2019.126251
Phase Structure and Magnetic Properties of Intermetallic Cu-Ni Alloy Nanopowders Synthesized by the Electrical Explosion of Wire
来源期刊：Archives of Metallurgy and MaterialsDOI：10.24425/AMM.2019.129468
Influence of the Process Parameters on the Microstructure of a Hardfacing Coating Elaborated by Hot Isostatic Pressing
来源期刊：Archives of Metallurgy and MaterialsDOI：10.24425/AMM.2019.126215
Physical and Numerical Modeling of Duplex Cast Steel Thin-Walled Castings
来源期刊：Archives of Metallurgy and MaterialsDOI：10.24425/AMM.2019.130112
Role of the molybdenum addition on the Mechanical Properties and Structure of the NICOMNIN Alloys
来源期刊：Archives of Metallurgy and MaterialsDOI：10.24425/AMM.2019.127606
Effect of Process Control Agent on the Microstructure of Ni-Based ODS Superalloy Produced by Mechanical Alloying and Sintering
来源期刊：Archives of Metallurgy and MaterialsDOI：10.24425/AMM.2019.129478
Preparation of Nickel Nanoparticles Using Nickel Raffinate Separated by Solvent Extraction from The Spent FeCl3 Etching Solution
来源期刊：Archives of Metallurgy and MaterialsDOI：10.24425/AMM.2019.127572
Ultra-Fast Current Aided Sintering of High Coercive Magnetic Powders and Composites
来源期刊：Archives of Metallurgy and MaterialsDOI：10.24425/AMM.2019.127615
Identification of Lack of Fusion and Incomplete Penetration in Butt Weld Joint by Ultrasonic Phased Array Method and X-Ray Method
来源期刊：Archives of Metallurgy and MaterialsDOI：10.24425/AMM.2019.129503
Changes in properties of hot-dip zinc coating resulting from heat treatment
来源期刊：Archives of Metallurgy and MaterialsDOI：10.24425/AMM.2019.126239
Microstructural Evolution of Sinter-Forged FE-CR-MO-C Alloy Depending on CU Addition
来源期刊：Archives of Metallurgy and MaterialsDOI：10.24425/amm.2019.127574
Effect of Milling Time Parameter on the Microstructure and the Thermoelectric Properties of n-Type Bi2Te2.7Se0.3 Alloys
来源期刊：Archives of Metallurgy and MaterialsDOI：10.24425/AMM.2019.127582
The Influence of the Superheat Temperature on the Slab Structure in the Continuous Steel Casting Process
来源期刊：Archives of Metallurgy and MaterialsDOI：10.24425/amm.2019.130092
Microstructural Features and Mechanical Properties after Applying Rolling with Cyclic Movement of Rolls of an Al-Li Alloys
来源期刊：Archives of Metallurgy and MaterialsDOI：10.24425/AMM.2019.130123
Characteristics of Die-Attach Method by Sinter Bonding Using AG-40CU Mechanically Alloyed Particles
来源期刊：Archives of Metallurgy and MaterialsDOI：10.24425/AMM.2019.127568
Determination of heat flux at a solid-solid intreface
来源期刊：Archives of Metallurgy and MaterialsDOI：10.24425/AMM.2019.126221
Influence of multi-hole filter modification on the flow hydrodynamic structure and refining process of liquid steel in the one-strand tundish
来源期刊：Archives of Metallurgy and MaterialsDOI：10.24425/AMM.2019.126220
A Study on Pore Properties of Hastelloy Powder Porous Metal Fabricated by Electrostatic Powder Coating
来源期刊：Archives of Metallurgy and MaterialsDOI：10.24425/amm.2019.127576
The Kinetic of Al3Ti Phase Growth in Explosively Welded Multilayered Al/Ti Clads during Annealing under Load Conditions
来源期刊：Archives of Metallurgy and MaterialsDOI：10.24425/AMM.2019.130125
Hydrodynamic conditions of flow in the tundish depending on selected technological parametersfor different steel groups
来源期刊：Archives of Metallurgy and MaterialsDOI：10.24425/AMM.2019.126219
Effects of Milling Duration on the Thermoelectric Properties of n-Type BI2TE2.7SE0.3
来源期刊：Archives of Metallurgy and MaterialsDOI：10.24425/AMM.2019.127583
Microstructure and Mechanical Properties of as Cast Al-6.5Mg-1.5Zn-0.5Fe Alloy Followed by Cold Rolling and Subsequent Annealing
来源期刊：Archives of Metallurgy and MaterialsDOI：10.24425/amm.2019.129464
Tailored Al2O3-Al2TiO5-TiO2 Composite Ceramics from different Titanium Precursors
来源期刊：Archives of Metallurgy and MaterialsDOI：10.24425/AMM.2019.130091
Determination of Uniaxial Tensile Behavior of Hypodermis in Porcine Skin Based on Rule of Mixtures
来源期刊：Archives of Metallurgy and MaterialsDOI：10.24425/amm.2019.127565
Electrical Conductivity and Morphology Study of Polyaniline Powder Synthesised with Various Doping Ions
来源期刊：Archives of Metallurgy and MaterialsDOI：10.24425/amm.2019.129490
Correlation between Microstructure and Exothermic Reaction Kinetics of Al-CuO Thermite Nanocomposite Powders Fabricated by Cryomilling
来源期刊：Archives of Metallurgy and MaterialsDOI：10.24425/AMM.2019.129475
Microstructures and Mechanical Properties of ODS Ferritic Stainless Steels for High Temperature Service Applications
来源期刊：Archives of Metallurgy and MaterialsDOI：10.24425/amm.2019.129473
The Impact of AL-TI-B Grain-Refiners from Different Manufacturers on Wrought AL-alloy
来源期刊：Archives of Metallurgy and MaterialsDOI：10.24425/amm.2019.127607
Calibration of Visco-Hyperelastic Model for Tensile Behavior of Porcine Skin
来源期刊：Archives of Metallurgy and MaterialsDOI：10.24425/AMM.2019.129454
Development and Modelling of a Novel Process of Manufacturing Cylindrical Products with a Variable Longitudinal-Section Stub Pipe
来源期刊：Archives of Metallurgy and MaterialsDOI：10.24425/AMM.2019.129512
Diffusive and Displacive Phase Transformations in Nanocomposites under High Pressure Torsion
来源期刊：Archives of Metallurgy and MaterialsDOI：10.24425/AMM.2019.127560
Selective Corrosion of Al2Cu Intermetallic Phase in Orthophosphoric Acid Aqueous Solutions
来源期刊：Archives of Metallurgy and MaterialsDOI：10.24425/AMM.2019.130084
Relation Between Active Power of the Submerged Arc Furnace and the Electric Energy Consumption Indicator in the Process of Ferrosilicon Smelting
来源期刊：Archives of Metallurgy and MaterialsDOI：10.24425/AMM.2019.127591
Influence of Recast Layer on the Fatigue Life of Ti6Al4V Processed by Electric Discharge Machining
来源期刊：Archives of Metallurgy and MaterialsDOI：10.24425/AMM.2019.130124
Fabrication of 4N5 Grade Tantalum Wire from Tantalum Scrap by EBM and Drawing
来源期刊：Archives of Metallurgy and MaterialsDOI：10.24425/AMM.2019.129476
Prediction of Microstructure of Grey Cast Irons by Electrical Resistivity Measurements
来源期刊：Archives of Metallurgy and MaterialsDOI：10.24425/AMM.2019.126261
Sintered Steels Coated with a Chromium Layer Doped with Diamond Nanoparticles
来源期刊：Archives of Metallurgy and MaterialsDOI：10.24425/AMM.2019.130137
The Effect of Manganese on the Crystallisation Process, Microstructure and Selected Properties of Compacted Graphite iron
来源期刊：Archives of Metallurgy and MaterialsDOI：10.24425/AMM.2019.130090
INFLUENCE OF DISSOLVED OXYGEN ON THE CORROSION BEHAVIOUR IN RINGER’S SOLUTION AND ARTIFICIAL SALIVA OF Co-Mo NANO-CRYSTALLINE COATINGS ELECTRODEPOSITED ON Co AND 316L SUBSTRATES
来源期刊：Archives of Metallurgy and MaterialsDOI：10.24425/AMM.2019.126216
