The Journal publishes and disseminates original research in the field of material forming. The research should constitute major achievements in the understanding, modeling or simulation of material forming processes. In this respect ‘forming’ implies a deliberate deformation of material.The journal establishes a platform of communication between engineers and scientists, covering all forming processes, including sheet forming, bulk forming, powder forming, forming in near-melt conditions (injection moulding, thixoforming, film blowing etc.), micro-forming, hydro-forming, thermo-forming, incremental forming etc. Other manufacturing technologies like machining and cutting can be included if the focus of the work is on plastic deformations.All materials (metals, ceramics, polymers, composites, glass, wood, fibre reinforced materials, materials in food processing, biomaterials, nano-materials, shape memory alloys etc.) and approaches (micro-macro modelling, thermo-mechanical modelling, numerical simulation including new and advanced numerical strategies, experimental analysis, inverse analysis, model identification, optimization, design and control of forming tools and machines, wear and friction, mechanical behavior and formability of materials etc.) are concerned.
该杂志发表和传播材料成型领域的原创研究。该研究应在材料成形过程的理解、建模或模拟方面取得重大成就。在这方面，“成形”意味着材料的有意变形。该杂志建立了工程师和科学家之间的交流平台，涵盖所有成形工艺，包括板材成形、块体成形、粉末成形、近熔融条件下的成形（注塑、触变性、薄膜吹塑等）、微成形、液压成形、热成形、渐进成形等。如果工作重点是塑性变形，则可以包括机加工和切削等其他制造技术。所有材料（金属、陶瓷、聚合物、复合材料、玻璃、木材、纤维增强材料、食品加工材料、生物材料、纳米材料、形状记忆合金等）和方法（微观-宏观建模、热-机械建模、数值模拟（包括新的和先进的数值策略）、实验分析、逆向分析、模型识别、优化、成形工具和机器的设计和控制、磨损和摩擦、材料的机械性能和可成形性等）都很担心。
Hybrid constitutive modeling: data-driven learning of corrections to plasticity models
来源期刊：International Journal of Material FormingDOI：10.1007/S12289-018-1448-X
Influence of machining parameters on surface quality during high speed edge trimming of carbon fiber reinforced polymers
来源期刊：International Journal of Material FormingDOI：10.1007/S12289-018-1419-2
Extension of the sensitivity-based virtual fields to large deformation anisotropic plasticity
来源期刊：International Journal of Material FormingDOI：10.1007/S12289-018-1428-1
Similarity measures for identifying material parameters from hysteresis loops using inverse analysis
来源期刊：International Journal of Material FormingDOI：10.1007/S12289-018-1421-8
Control of the material flow in sheet-bulk metal forming using modifications of the tool surface
来源期刊：International Journal of Material FormingDOI：10.1007/S12289-018-1399-2
The influence of warm forming in natural aging and springback of Al-Mg-Si alloys
来源期刊：International Journal of Material FormingDOI：10.1007/S12289-018-1406-7
Investigations of tangential ultrasonic vibration turning of Ti6Al4V using finite element method
来源期刊：International Journal of Material FormingDOI：10.1007/S12289-018-1402-Y
Flow curves up to high strains considering load reversal and damage
来源期刊：International Journal of Material FormingDOI：10.1007/S12289-018-01466-Z
Coupled effects of initial orientation scatter and grain-interaction to texture evolution: a crystal plasticity FE study
来源期刊：International Journal of Material FormingDOI：10.1007/S12289-018-1415-6
Numerical modeling of local capillary effects in porous media as a pressure discontinuity acting on the interface of a transient bi-fluid flow
来源期刊：International Journal of Material FormingDOI：10.1007/S12289-018-1442-3
A model to describe hardening behavior of Zircaloy-4 tube during cold pilgering process
来源期刊：International Journal of Material FormingDOI：10.1007/S12289-018-1420-9
A novel analytical model to predict springback of DP780 steel based on modified Yoshida-Uemori two-surface hardening model
来源期刊：International Journal of Material FormingDOI：10.1007/S12289-018-1427-2
A viscoplastic model based on a variable strain rate sensitivity index for superplastic sheet metals
来源期刊：International Journal of Material FormingDOI：10.1007/S12289-018-1443-2
3D FEM-DEM coupling analysis for granular-media-based thin-wall elbow tube push-bending process
来源期刊：International Journal of Material FormingDOI：10.1007/S12289-019-01473-8
Analysis of non-isothermal warm deep drawing of dual-phase DP600 steel
来源期刊：International Journal of Material FormingDOI：10.1007/S12289-018-1400-0
Effect of powder metallurgy synthesis parameters for pure aluminium on resultant mechanical properties
来源期刊：International Journal of Material FormingDOI：10.1007/S12289-018-1408-5
Developing constitutive equations of flow stress for hot deformation of AZ31 magnesium alloy under compression, torsion, and tension
来源期刊：International Journal of Material FormingDOI：10.1007/S12289-018-1440-5
Experimental characterization and analysis of fiber orientations in hemispherical thermostamping for unidirectional thermoplastic composites
来源期刊：International Journal of Material FormingDOI：10.1007/S12289-018-1410-Y
Two regression approaches for prediction of large radius air bending
来源期刊：International Journal of Material FormingDOI：10.1007/S12289-018-1422-7
Single point incremental forming of AA6061 thin sheet: calibration of ductile fracture models incorporating anisotropy and post forming analyses
来源期刊：International Journal of Material FormingDOI：10.1007/S12289-018-1439-Y
Two-way approach for deformation analysis of non-crimp fabrics in uniaxial bias extension tests based on pure and simple shear assumption
来源期刊：International Journal of Material FormingDOI：10.1007/S12289-019-01481-8
Low-cost metal-forming process using an elastic punch and a reconfigurable multi-pin die
来源期刊：International Journal of Material FormingDOI：10.1007/S12289-018-1423-6
Evaluating the potential of forming spot-welded layups out of fibre reinforced thermoplastic tape without previous consolidation
来源期刊：International Journal of Material FormingDOI：10.1007/S12289-018-1416-5
A methodology for determining preform compaction in bladder-assisted resin transfer molding with elastomeric bladders for tubular composite parts
来源期刊：International Journal of Material FormingDOI：10.1007/S12289-018-1398-3
Bending moment in incremental tube forming
来源期刊：International Journal of Material FormingDOI：10.1007/S12289-018-1411-X
Mechanical properties and microstructure of Inconel 625 cylinders used in aerospace industry subjected to flow forming with laser and standard heat treatment
来源期刊：International Journal of Material FormingDOI：10.1007/S12289-018-1413-8
Introduction to the level-set full field modeling of laths spheroidization phenomenon in α/β titanium alloys
来源期刊：International Journal of Material FormingDOI：10.1007/S12289-017-1371-6
Ductility prediction of substrate-supported metal layers based on rate-independent crystal plasticity theory
来源期刊：International Journal of Material FormingDOI：10.1007/s12289-018-1401-z
An EIGA driven coupled of electromagnetic-thermal field modeling in the induction melting process
来源期刊：International Journal of Material FormingDOI：10.1007/S12289-018-1438-Z
An extension of Rice localization criterion to predict the onset of shear localization in semi-solid materials
来源期刊：International Journal of Material FormingDOI：10.1007/S12289-018-1445-0
New approach for the optimization of pass-schedules in open-die forging
来源期刊：International Journal of Material FormingDOI：10.1007/S12289-019-01471-W
Numerical investigation of the combined effects of curvature and normal stress on sheet metal formability
来源期刊：International Journal of Material FormingDOI：10.1007/S12289-017-1382-3
Research on a wrinkle-free forming method using paraffin wax for sheet metal
来源期刊：International Journal of Material FormingDOI：10.1007/S12289-018-1424-5
Billet flow formation of discontinuous carbon fiber ribbed square panels from continuous carbon fibers
来源期刊：International Journal of Material FormingDOI：10.1007/S12289-018-1414-7
Development of bio-based poly(butylene succinate) formulations for microcellular injection foaming
来源期刊：International Journal of Material FormingDOI：10.1007/s12289-019-01512-4
Analysis of shape defects during flexible roll forming of steel/aluminum double-layered blanks
来源期刊：International Journal of Material FormingDOI：10.1007/s12289-019-01504-4
On the inverse identification of Lankford coefficients using geometrical changes under quasi-biaxial loading
来源期刊：International Journal of Material FormingDOI：10.1007/S12289-019-01498-Z
Speeding-up simulation of cogging process by multigrid method
来源期刊：International Journal of Material FormingDOI：10.1007/S12289-018-1405-8
Multi-criteria optimization strategies for tree-structured production chains
来源期刊：International Journal of Material FormingDOI：10.1007/S12289-017-1372-5
End flare of linear flow split profiles
来源期刊：International Journal of Material FormingDOI：10.1007/S12289-018-1426-3
Research of adapted tool Design in Cold Forging of gears
来源期刊：International Journal of Material FormingDOI：10.1007/s12289-019-01508-0
A simple and systematic scheme implemented in explicit FEM solver for surface tension effects in powder injection moulding process
来源期刊：International Journal of Material FormingDOI：10.1007/S12289-018-1412-9
Optimization of extrusion process of double-base propellants from their rheological properties
来源期刊：International Journal of Material FormingDOI：10.1007/S12289-018-1418-3
Experimental and numerical investigation of reduction in shape distortion for angled composite parts
来源期刊：International Journal of Material FormingDOI：10.1007/s12289-019-01510-6
A proposal improvement in flatness measurement in strip rolling
来源期刊：International Journal of Material FormingDOI：10.1007/S12289-018-1409-4
Global-cumulative incremental hole-flanging by tools with complementary-shape cross section
来源期刊：International Journal of Material FormingDOI：10.1007/S12289-018-01460-5
Computational analysis of the extrusion process of fused deposition modeling of acrylonitrile-butadiene-styrene
来源期刊：International Journal of Material FormingDOI：10.1007/s12289-019-01523-1
Modelling strategies and FEM approaches to characterize micro-sandwich sheets with unknown core properties
来源期刊：International Journal of Material FormingDOI：10.1007/S12289-018-1441-4
Sensitivity analysis of the expansion process for alloy UNS N08028
来源期刊：International Journal of Material FormingDOI：10.1007/S12289-018-1404-9
Semi-analytical models for flexure deformation in one-step simulation of sheet metal forming
来源期刊：International Journal of Material FormingDOI：10.1007/S12289-017-1376-1
