Vacuum

Vacuum

VACUUM
影响因子:3.9
JCR分区:Q2
新锐分区:材料科学3区
是否综述期刊:N/A
是否预警:不在预警名单内
是否OA:
出版国家/地区:ENGLAND
出版社:Elsevier Ltd
发刊时间:1951
收录数据库:SCIE/Scopus收录
ISSN:0042-207X

期刊介绍

Vacuum is an international rapid publications journal with a focus on short communication. All papers are peer-reviewed, with the review process for short communication geared towards very fast turnaround times. The journal also published full research papers, thematic issues and selected papers from leading conferences. A report in Vacuum should represent a major advance in an area that involves a controlled environment at pressures of one atmosphere or below. The scope of the journal includes: 1. Vacuum; original developments in vacuum pumping and instrumentation, vacuum measurement, vacuum gas dynamics, gas-surface interactions, surface treatment for UHV applications and low outgassing, vacuum melting, sintering, and vacuum metrology. Technology and solutions for large-scale facilities (e.g., particle accelerators and fusion devices). New instrumentation ( e.g., detectors and electron microscopes). 2. Plasma science; advances in PVD, CVD, plasma-assisted CVD, ion sources, deposition processes and analysis. 3. Surface science; surface engineering, surface chemistry, surface analysis, crystal growth, ion-surface interactions and etching, nanometer-scale processing, surface modification. 4. Materials science; novel functional or structural materials. Metals, ceramics, and polymers. Experiments, simulations, and modelling for understanding structure-property relationships. Thin films and coatings. Nanostructures and ion implantation.
真空是一个国际快速出版物杂志,重点是短期通信。所有论文都经过同行评审,针对短时间交流的评审过程旨在缩短周转时间。该杂志还发表了完整的研究论文,主题问题和主要会议的精选论文。真空的报告应该代表一个领域的重大进展,涉及一个大气压或以下的受控环境。该杂志的范围包括:1.真空:真空泵和仪器、真空测量、真空气体动力学、气体-表面相互作用、超高真空应用的表面处理和低释气、真空熔炼、烧结和真空计量学的原创发展。大型设施的技术和解决方案(例如:粒子加速器和聚变装置)。新仪器(例如,检测器和电子显微镜)。等离子体科学物理气相沉积、化学气相沉积、等离子体辅助化学气相沉积、离子源、沉积工艺和分析的进展。表面科学表面工程、表面化学、表面分析、晶体生长、离子-表面相互作用和蚀刻、纳米级处理、表面改性。材料科学新的功能或结构材料。金属、陶瓷和聚合物。实验、模拟和建模以了解结构-性质关系。薄膜和涂层。纳米结构与离子注入。
年发文量 913
国人发稿量 392.59
国人发文占比 0.43%
自引率 15.4%
平均录取率容易
平均审稿周期 约4.1个月
版面费 -
偏重研究方向 工程技术-材料科学:综合

期刊高被引文献

Effect of CuZnAl particles addition on microstructure of Cu/Sn58Bi/Cu TLP bonding solder joints
来源期刊:VacuumDOI:10.1016/J.VACUUM.2019.06.024
Investigation of half-metallicity and magnetism of bulk and (111)-surfaces of Fe2MnP full Heusler alloy
来源期刊:VacuumDOI:10.1016/J.VACUUM.2019.03.049
Ballistic behaviour of spray formed AA7055 aluminum alloy against tungsten core projectile impact
来源期刊:VacuumDOI:10.1016/J.VACUUM.2018.10.073
Room temperature magnetron sputtering and laser annealing of ultrathin MoS2 for flexible transistors
来源期刊:VacuumDOI:10.1016/J.VACUUM.2018.10.077
Investigation of the effect of ionizing radiation on the structural and conductive characteristics of Ni nanostructures
来源期刊:VacuumDOI:10.1016/J.VACUUM.2019.02.015
Friction and wear behavior of Cu-La2O3 composite sliding against 52100 bearing steel in vacuum
来源期刊:VacuumDOI:10.1016/J.VACUUM.2018.12.019
Insight into the pressure effect on the structural stability and physical properties of cubic sesquioxides X2O3 (X= Sc, Y and In)
来源期刊:VacuumDOI:10.1016/J.VACUUM.2019.108855
Chemical and structural characterization of tungsten nitride (WNx) thin films synthesized via Gas Injection Magnetron Sputtering technique
来源期刊:VacuumDOI:10.1016/J.VACUUM.2019.04.020
Hot tensile deformation and fracture behaviors of a typical ultrahigh strength steel
来源期刊:VacuumDOI:10.1016/J.VACUUM.2019.108863
Enhanced performance of solar-blind ultraviolet photodetector based on Mg-doped amorphous gallium oxide film
来源期刊:VacuumDOI:10.1016/J.VACUUM.2018.10.025
2D organic-inorganic hybrid composite material as a high-performance supercapacitor electrode
来源期刊:VacuumDOI:10.1016/J.VACUUM.2018.10.051
The influence of ion implantation-induced oxygen vacancy on electrical conductivity of WO3 thin films
来源期刊:VacuumDOI:10.1016/J.VACUUM.2019.04.004
Investigation on the interfacial stability of multilayered Cu–W films at elevated deposition temperatures during co-sputtering
来源期刊:VacuumDOI:10.1016/J.VACUUM.2019.04.063
Controllable preparation of iron nanostructure/carbon nanotube composite materials and their microwave absorption properties
来源期刊:VacuumDOI:10.1016/J.VACUUM.2018.12.029
Laser additive manufacturing of TA15 - Inconel 718 bimetallic structure via Nb/Cu multi-interlayer
来源期刊:VacuumDOI:10.1016/J.VACUUM.2019.108888
100 MeV Silicon9+ swift heavy ion irradiation - Strategic defect annealing approach to enhance the electrical conductivity of few-layered MoS2 sheets - PVA nanocomposite film
来源期刊:VacuumDOI:10.1016/j.vacuum.2019.108939
Boosted electrochemical performance of TiO2 decorated RGO/CNT hybrid nanocomposite by UV irradiation
来源期刊:VacuumDOI:10.1016/J.VACUUM.2018.11.052
One-step in-situ reaction synthesis of TiC/graphene composite thin film for titanium foil surface reinforcement
来源期刊:VacuumDOI:10.1016/J.VACUUM.2018.12.010
Experimental investigation on characteristics of pulsed plasma thrusters with the propellant samples of modified PTFE filled Si, Al and Al2O3
来源期刊:VacuumDOI:10.1016/J.VACUUM.2019.04.027
Effect of addition of areca fine fibers on the mechanical properties of Calotropis Gigantea fiber/phenol formaldehyde biocomposites
来源期刊:VacuumDOI:10.1016/J.VACUUM.2019.04.022
Oxygen transport behavior and characteristics of nonmetallic inclusions during vacuum electroslag remelting
来源期刊:VacuumDOI:10.1016/J.VACUUM.2019.03.014
Location dependence of microstructure and mechanical properties on wire arc additively manufactured nuclear grade steel
来源期刊:VacuumDOI:10.1016/J.VACUUM.2019.108818
Interfacial microstructure and mechanical properties of the TiC-Ni cermet/Ag-Cu-Zn/Invar joint
来源期刊:VacuumDOI:10.1016/J.VACUUM.2019.108830
Microstructure and properties of M2 high-speed steel cast by the gravity and vacuum investment casting
来源期刊:VacuumDOI:10.1016/J.VACUUM.2019.01.041
Metal-insulator transition of monoclinic VO2 thin film without Peierls distortion
来源期刊:VacuumDOI:10.1016/J.VACUUM.2019.02.045
High-performance quasi-solid-state photoelectrochemical-type ultraviolet photodetector based on ZnO nanowire arrays
来源期刊:VacuumDOI:10.1016/J.VACUUM.2019.03.003
Design, fabrication and characterization of a windowless extrapolation chamber for low-energy X-rays: Experimental and Monte Carlo results
来源期刊:VacuumDOI:10.1016/J.VACUUM.2018.10.081
Remarkable electronic band structure leads to high thermoelectric properties in p-type γ-Cu2S
来源期刊:VacuumDOI:10.1016/j.vacuum.2019.108964
Polyvinyl thiol assisted Ag NPs as an efficient SERS analyzer and visible light photocatalyst for tannery waste landfill leachate
来源期刊:VacuumDOI:10.1016/J.VACUUM.2018.12.022
Design and experimental study of high-voltage pulsed penning discharge source with grid electrode
来源期刊:VacuumDOI:10.1016/j.vacuum.2019.108940
Electrical properties of Strontium Barium Niobate (Sr0.6Ba0.4Nb2O6) thin films deposited by pulsed laser deposition technique
来源期刊:VacuumDOI:10.1016/J.VACUUM.2018.11.057
Pd/Ag thin film deposited on negative temperature coefficient (NTC) ceramics by direct current magnetron sputtering
来源期刊:VacuumDOI:10.1016/J.VACUUM.2019.06.005
Plasma diagnostics and characterization of the Mg and Mg–Zn thin films deposited by thermionic vacuum arc (TVA) method
来源期刊:VacuumDOI:10.1016/J.VACUUM.2019.06.002
Facile synthesis of various carbon nanotube/metal oxide nanocomposites with high quality
来源期刊:VacuumDOI:10.1016/J.VACUUM.2019.05.002
The variation of microstructures, textures and mechanical properties from edge to center in cross section of Ti6242s titanium alloy
来源期刊:VacuumDOI:10.1016/J.VACUUM.2018.09.046
Epitaxial CuO thin films prepared on MgAl2O4 (110) by RF-plasma assisted pulsed laser deposition
来源期刊:VacuumDOI:10.1016/j.vacuum.2019.108932
Design and beam dynamics of a Transmission Electron Microscope electron gun assembly
来源期刊:VacuumDOI:10.1016/J.VACUUM.2019.04.039
Theoretical analysis of bubbles nucleating on surfaces of convex spherical inclusions in molten steel during vacuum treatment
来源期刊:VacuumDOI:10.1016/J.VACUUM.2019.01.020
Shock wave reflection from a short orifice open to vacuum
来源期刊:VacuumDOI:10.1016/J.VACUUM.2018.12.041
Study on the influence of change in axial position of cathode on the ignition process of a Hall thruster
来源期刊:VacuumDOI:10.1016/J.VACUUM.2019.06.007
Preparation, characterization and property of high-quality LaB6 single crystal grown by the optical floating zone melting technique
来源期刊:VacuumDOI:10.1016/J.VACUUM.2019.108845
Effects of varying ion flux on high vacuum evaporated erbium thin films
来源期刊:VacuumDOI:10.1016/J.VACUUM.2019.04.005
Fabrication of nanoporous thin films via radio-frequency magnetron sputtering and O2 plasma ashing
来源期刊:VacuumDOI:10.1016/J.VACUUM.2019.01.049
Spatially resolved ground state atomic oxygen density during the mode transition of inductively coupled oxygen plasmas
来源期刊:VacuumDOI:10.1016/J.VACUUM.2019.03.009
Effect of deposition temperature on structure and properties of Nd2O3 thin films prepared by magnetron sputtering
来源期刊:VacuumDOI:10.1016/j.vacuum.2019.108936
Room temperature ferromagnetism and crossover of negative magnetoresistance to positive magnetoresistance in the Co doped ITO films
来源期刊:VacuumDOI:10.1016/j.vacuum.2019.108929
Estimation of temperature in turbo-molecular pump based on motor resistance online identification
来源期刊:VacuumDOI:10.1016/j.vacuum.2019.108935
Isobaric vapor-liquid equilibrium for binary system related to the organophosphoric extractant of D2EHPA + n-dodecane and TBP + n-dodecane at 0.13, 2.40 and 6.67 kPa
来源期刊:VacuumDOI:10.1016/J.VACUUM.2018.11.011
Stability of cross-shaped electron beam in a vacuum magnetic sensor with a p-Si field emitter tip
来源期刊:VacuumDOI:10.1016/J.VACUUM.2019.108858
The increasing of H−current from Penning ion source with electrically biased metal hydride cathode
来源期刊:VacuumDOI:10.1016/J.VACUUM.2019.01.046

质量指标占比

研究类文章占比 OA被引用占比 撤稿占比 出版后修正文章占比
100.00%4.04%-0.15%

相关指数

影响因子
影响因子
年发文量
自引率

预警情况

查看说明
时间 预警情况
2026年03月发布的新锐学术版不在预警名单中
2025年03月发布的2025版不在预警名单中
2024年02月发布的2024版不在预警名单中
2023年01月发布的2023版不在预警名单中
2021年12月发布的2021版不在预警名单中
2020年12月发布的2020版不在预警名单中
*来源:中科院《 国际期刊预警名单》

JCR分区

WOS分区等级:2区
版本 按学科 分区
WOS期刊SCI分区
WOS期刊SCI分区
WOS期刊SCI分区是指SCI官方(Web of Science)为每个学科内的期刊按照IF数值排 序,将期刊按照四等分的方法划分的Q1-Q4等级,Q1代表质量最高,即常说的1区期刊。
(2024-2025年最新版)
MATERIALS SCIENCE, MULTIDISCIPLINARY
Q2
PHYSICS, APPLIED
Q2

中科院分区

查看说明
版本 大类学科 小类学科 Top期刊 综述期刊
2026年3月发布
(新锐分区)
材料科学3区
MATERIALS SCIENCE, MULTIDISCIPLINARY 材料科学:综合
3区
PHYSICS, APPLIED 物理:应用
3区
N/A
2025年3月升级版
材料科学3区
PHYSICS, APPLIED 物理:应用
2区
MATERIALS SCIENCE, MULTIDISCIPLINARY 材料科学:综合
3区
2023年12月旧的升级版
材料科学2区
PHYSICS, APPLIED 物理:应用
2区
MATERIALS SCIENCE, MULTIDISCIPLINARY 材料科学:综合
3区

CiteScore

查看说明
CiteScore SJR SNIP 学科 分区 排名
7.00
0.783
1.154
大类:Physics and Astronomy 小类:Instrumentation
大类:Physics and Astronomy 小类:Condensed Matter Physics
大类:Physics and Astronomy 小类:Surfaces, Coatings and Films
Q1
Q1
Q1
27 / 174
76 / 443
29 / 132

相关文章