Applied Composite Materials is an international journal dedicated to the publication of original full-length papers, review articles and short communications of the highest quality that advance the development and application of engineering composite materials. Its articles identify problems that limit the performance and reliability of the composite material and composite part; and propose solutions that lead to innovation in design and the successful exploitation and commercialization of composite materials across the widest spectrum of engineering uses. The main focus is on the quantitative descriptions of material systems and processing routes.Coverage includes management of time-dependent changes in microscopic and macroscopic structure and its exploitation from the material's conception through to its eventual obsolescence.
《应用复合材料》是一本国际性期刊，致力于发表原创的长篇论文、评论文章和最高质量的简短通讯，推动工程复合材料的发展和应用。其文章指出了限制复合材料和复合部件的性能和可靠性的问题;并提出解决方案，使复合材料的设计创新、成功开发和商业化，应用于最广泛的工程领域。主要关注材料系统和工艺路线的定量描述，包括对微观和宏观结构随时间变化的管理，以及从材料概念到最终废弃的开发利用。
The Impact Performance of Woven-Fabric Thermoplastic and Thermoset Composites Subjected to High-Velocity Soft- and Hard-Impact Loading
来源期刊：Applied Composite MaterialsDOI：10.1007/s10443-019-09786-2
Flexural Behavoiur of the Composite Sandwich Panels with Novel and Regular Corrugated Cores
来源期刊：Applied Composite MaterialsDOI：10.1007/s10443-019-09761-x
Telescopic Hydraulic Cylinder Made of Composite Material
来源期刊：Applied Composite MaterialsDOI：10.1007/s10443-019-09772-8
A Comparative Study on Interlaminar Properties of L-shaped Two-Dimensional (2D) and Three-Dimensional (3D) Woven Composites
来源期刊：Applied Composite MaterialsDOI：10.1007/s10443-018-9745-6
Analysis of Open-Hole Compressive CFRP Laminates at Various Temperatures Based on a Multiscale Strategy
来源期刊：Applied Composite MaterialsDOI：10.1007/s10443-019-9759-8
Effect of a Post-Fatigue Damage on the Residual Dynamic Behavior of Advanced-SMC Composites
来源期刊：Applied Composite MaterialsDOI：10.1007/s10443-019-09782-6
Coupled Thermal-Mechanical Progressive Damage Model with Strain and Heating Rate Effects for Lightning Strike Damage Assessment
来源期刊：Applied Composite MaterialsDOI：10.1007/s10443-019-09789-z
Cohesive Model for the Simulation of Crack Initiation and Propagation in Mixed-Mode I/II in Composite Materials
来源期刊：Applied Composite MaterialsDOI：10.1007/s10443-019-09774-6
Microscopic Mechanism of the High-Temperature Strength Behaviour of a C/SiC Composite
来源期刊：Applied Composite MaterialsDOI：10.1007/s10443-019-09766-6
Injection-Compression-Compression Process for Preparation of High-Performance Conductive Polymeric Composites
来源期刊：Applied Composite MaterialsDOI：10.1007/s10443-019-09775-5
Microstructure Characterization by X-Ray Computed Tomography of C/C-SiC Ceramic Composites Fabricated with Different Carbon Fiber Architectures
来源期刊：Applied Composite MaterialsDOI：10.1007/s10443-019-09778-2
Manufacturing and Flexural Characterization of Infusion-Reacted Thermoplastic Wind Turbine Blade Subcomponents
来源期刊：Applied Composite MaterialsDOI：10.1007/s10443-019-9760-2
Meso-Level Finite Element Modeling Method for Mechanical Response of Braided Composite Tube with Gradient Structure in Axial Direction
来源期刊：Applied Composite MaterialsDOI：10.1007/s10443-019-09769-3
Three-Dimensional Numerical Simulation of Meso-Scale-Void Formation during the Mold-Filling Process of LCM
来源期刊：Applied Composite MaterialsDOI：10.1007/s10443-019-09770-w
An Investigation into Process Parameters Effect on the Formability of GLARE Materials Using Stamp Forming
来源期刊：Applied Composite MaterialsDOI：10.1007/s10443-019-09788-0
Theoretical Analysis on Needle-Punched Carbon/Carbon Composites
来源期刊：Applied Composite MaterialsDOI：10.1007/s10443-018-9749-2
A Non-Destructive Method for Evaluation of the Out of Plane Elastic Modulus of Porous and Composite Materials
来源期刊：Applied Composite MaterialsDOI：10.1007/s10443-018-9754-5
Two-Scale Prediction of Effective Thermal Conductivity of 3D Braided C/C Composites Considering Void Defects by Asymptotic Homogenization Method
来源期刊：Applied Composite MaterialsDOI：10.1007/s10443-019-09785-3
Numerical and Experimental Investigation of a Laminated Aluminum Composite Structure
来源期刊：Applied Composite MaterialsDOI：10.1007/s10443-019-09773-7
Influence Factors on Grinding Force in Surface Grinding of Unidirectional C/SiC Composites
来源期刊：Applied Composite MaterialsDOI：10.1007/s10443-019-09767-5
Influence of Braiding Angle on Multiple Impact Damages of 3-D Braided Composite along Longitudinal Direction
来源期刊：Applied Composite MaterialsDOI：10.1007/s10443-019-09779-1
Experimental Investigation of the Effect of Pre-Bond Contamination with Fingerprints and Ageing on the Fracture Toughness of Composite Bonded Joints
来源期刊：Applied Composite MaterialsDOI：10.1007/s10443-019-09763-9
Evaluating Structural Failure of Load-Carrying Composite Box Beams with Different Geometries and Load Conditions
来源期刊：Applied Composite MaterialsDOI：10.1007/s10443-019-09776-4
Multi-Scale Modeling and Experimental Study of the Strength of Plain-Woven SiC/SiC Composites
来源期刊：Applied Composite MaterialsDOI：10.1007/s10443-019-09783-5
Progressive Damage Analysis and Optimization of Winding Angle and Geometry for a Composite Pressure Hull Wound Using Geodesic and Planar Patterns
来源期刊：Applied Composite MaterialsDOI：10.1007/s10443-019-09764-8
Rapid Preparation of 2D C/C Composite by Moulding Method Based on Recycled Carbon Fiber
来源期刊：Applied Composite MaterialsDOI：10.1007/s10443-019-09771-9
Axial Crushing Behavior of Braided Carbon/Polyurethane Composite Tubes
来源期刊：Applied Composite MaterialsDOI：10.1007/s10443-019-09780-8
Simulation for laminate’s Delamination under out-of-Plane Impact with Modification of Interface Friction Effect
来源期刊：Applied Composite MaterialsDOI：10.1007/s10443-019-09781-7
Effects of Pore on Thermal Diffusivity and Thermal Radiation Properties of C/SiC Composites at High Temperatures
来源期刊：Applied Composite MaterialsDOI：10.1007/s10443-019-09787-1
Effect of Scanning Speed with UV Laser Cleaning on Adhesive Bonding Tensile Properties of CFRP
来源期刊：Applied Composite MaterialsDOI：10.1007/s10443-019-09768-4
Multi-Scale Modeling of Curing Residual Stresses in Composite with Random Fiber Distribution into Consideration
来源期刊：Applied Composite MaterialsDOI：10.1007/s10443-019-09762-w
Reversed-Air Cooling Technology for High-Quality Drilling of CFRP
来源期刊：Applied Composite MaterialsDOI：10.1007/s10443-018-9755-4
Assessment of a Progressive Fatigue Damage Model for AS4/3501–6 Carbon Fiber/Epoxy Composites Using Digital Image Correlation
来源期刊：Applied Composite MaterialsDOI：10.1007/s10443-019-09777-3
Influence of the Ply Angle Deviation on the Out-of-Plane Deformation of the Composite Space Mirror
来源期刊：Applied Composite MaterialsDOI：10.1007/s10443-018-9756-3
Experimental Investigation of Fastener Pull-out Response in Composite Joints under Static and Dynamic Loading Rates
来源期刊：Applied Composite MaterialsDOI：10.1007/s10443-019-09784-4
Investigation of the Quasi-Homogenous Laminate by Means of the Direction Factor of the Bending Stiffness
来源期刊：Applied Composite MaterialsDOI：10.1007/s10443-018-9757-2
A Novel Method to Improve Temperature Uniformity in Polymer Composites Microwave Curing Process through Deep Learning with Historical Data
来源期刊：Applied Composite MaterialsDOI：10.1007/s10443-019-09791-5
Correction to: Bird-Strike Damage Analysis and Preliminary Design of Composite Radome Structure Using Smoothed Particle Hydrodynamics
来源期刊：Applied Composite MaterialsDOI：10.1007/s10443-019-9758-9
Fatigue Hysteresis Loops Simulation of SiCf /Ti Composites under Two-Stage Cyclic Loading
来源期刊：Applied Composite MaterialsDOI：10.1007/s10443-019-09765-7
Adaptive Path Planning of Fiber Placement Based on Improved Method of Mesh Dynamic Representation
来源期刊：Applied Composite MaterialsDOI：10.1007/s10443-018-9751-8
