Refractories and Industrial Ceramics publishes peer-reviewed articles on the latest developments and discoveries in the field of refractory materials and ceramics, focusing on the practical aspects of their production and use.Topics covered include:Scientific Research;Raw Materials;Production;Equipment;Heat Engineering;Applications.
Preparation of MoSi2–SiC–ZrB2 Structural Ceramics by Free Sintering
来源期刊：Refractories and Industrial CeramicsDOI：10.1007/s11148-019-00372-4
Structure, Properties, and Applications of Graphite-Like Hexagonal Boron Nitride
来源期刊：Refractories and Industrial CeramicsDOI：10.1007/s11148-019-00355-5
Introduction to Ceramic Micromechanics. Ceramic Object Operating System
来源期刊：Refractories and Industrial CeramicsDOI：10.1007/s11148-019-00320-2
Mullite–TiC–c-BN–c-ZrO2 materials Produced by Spark-Plasma Sintering and Their Properties
来源期刊：Refractories and Industrial CeramicsDOI：10.1007/s11148-019-00314-0
Effect of Pyrocatechin on the Properties of Cement-Free Refractory Concrete Mixtures Based on Silica-Containing Colloidal Binders
来源期刊：Refractories and Industrial CeramicsDOI：10.1007/s11148-019-00268-3
Acidic Methods of Alumina Production (Review)
来源期刊：Refractories and Industrial CeramicsDOI：10.1007/s11148-019-00343-9
Stabilization of ZrO2 Concentrate by Rare Earth Elements (La, Nd, Pr, Ce)
来源期刊：Refractories and Industrial CeramicsDOI：10.1007/s11148-019-00280-7
Application Method for Protective and Electrical Insulating Ceramic Coatings by Microarc Oxidation Under Excess Pressure Conditions
来源期刊：Refractories and Industrial CeramicsDOI：10.1007/s11148-019-00350-w
Design of the Ceramic-Bladed End Milling Cutters with Regard for Their Stress-Strain State for the Innovation Technological Processes. Choice of Ceramics. Part 1
来源期刊：Refractories and Industrial CeramicsDOI：10.1007/s11148-019-00272-7
Features of the Preparation and Study of Electrophysical Characteristics (BeO+TiO2)-Ceramics by Impedance Spectroscopy
来源期刊：Refractories and Industrial CeramicsDOI：10.1007/s11148-019-00359-1
Free SHS-Compression Method for Producing Large-Sized Plates from Ceramic Materials
来源期刊：Refractories and Industrial CeramicsDOI：10.1007/s11148-019-00348-4
Phase Formation in the Synthesis of Ti2AlN by Spark Plasma Sintering in the Ti/AlN System
来源期刊：Refractories and Industrial CeramicsDOI：10.1007/s11148-019-00291-4
Research in the Field of Composite Materials Based on HCBS and Refractory Materials Based on the System Al2O3–SiO2–SiC. Part 31
来源期刊：Refractories and Industrial CeramicsDOI：10.1007/s11148-019-00252-x
Selection of Refractory Materials for Electric Furnaces Used for Radioactive Waste Vitrification
来源期刊：Refractories and Industrial CeramicsDOI：10.1007/s11148-019-00283-4
Combined Synthesis of Heterogeneous Powders in CaB6–TiB2 System
来源期刊：Refractories and Industrial CeramicsDOI：10.1007/s11148-019-00266-5
Effect of Refractory Structure on Operating Properties
来源期刊：Refractories and Industrial CeramicsDOI：10.1007/s11148-019-00281-6
Service-Induced Damages of the Ceramic Thrust Bearing Pivot in the Seal Section of Electrical Centrifugal Pump System
来源期刊：Refractories and Industrial CeramicsDOI：10.1007/s11148-019-00273-6
Effect of Iron-Compound Additives on Self-Propagating High-Temperature Synthesis of Si2N2O
来源期刊：Refractories and Industrial CeramicsDOI：10.1007/s11148-019-00358-2
Design of Ceramic-Bladed End Milling Cutters with Regard for Their Stress-Strain State for Innovative Production Processes. Choice of Ceramics. Part 33
来源期刊：Refractories and Industrial CeramicsDOI：10.1007/s11148-019-00357-3
Investigation of the Dust-Air Flow Near a Vertical Rotating Cylindrical Local Exhaust
来源期刊：Refractories and Industrial CeramicsDOI：10.1007/s11148-019-00294-1
Correction to: Physical and Technological Aspects of Precision Laser Treatment of Ceramic Materials. Effect of Treatment Regime
来源期刊：Refractories and Industrial CeramicsDOI：10.1007/s11148-019-00297-y
Spark Plasma Sintering of Al2O3-Ceramic Workpieces for Small End Milling Cutters
来源期刊：Refractories and Industrial CeramicsDOI：10.1007/s11148-019-00285-2
Analysis of the Process of Casting of the Metal by an Open Stream and the Design of the Equipment of Receiving Chambers of the Tundish of CCM
来源期刊：Refractories and Industrial CeramicsDOI：10.1007/s11148-019-00300-6
Periclase-Chromite Refractory Decomposition by a Coal – Gas Medium During Copper Sulfide Raw Material Processing
来源期刊：Refractories and Industrial CeramicsDOI：10.1007/s11148-019-00288-z
Structural Changes during Sintering of Al2O3 3D-Ceramics
来源期刊：Refractories and Industrial CeramicsDOI：10.1007/s11148-019-00255-8
Prospective Technogenic Mineral Resources for Refractory Production
来源期刊：Refractories and Industrial CeramicsDOI：10.1007/s11148-019-00344-8
Sintering of Ceramic Materials Based on Bauxitized Clay of the North-Onezh Deposit. Part 2. Effect of Sintering Additions
来源期刊：Refractories and Industrial CeramicsDOI：10.1007/s11148-019-00277-2
Study of the Possibility of Preparing Low-Cement Magnesia Concretes
来源期刊：Refractories and Industrial CeramicsDOI：10.1007/s11148-019-00269-2
Research in the Field of Composite Materials Based on HCBS and Refractory Materials Based on the System Al2O3–SiO2–SiC. Part 41
来源期刊：Refractories and Industrial CeramicsDOI：10.1007/s11148-019-00325-x
Properties of Different Aluminum Oxide Powders and Ceramics Made from Them
来源期刊：Refractories and Industrial CeramicsDOI：10.1007/s11148-019-00316-y
Correlation of Al2O3-Ceramic Structure with the Mechanism of Surface Layer Formation for Workpieces During Diamond Grinding
来源期刊：Refractories and Industrial CeramicsDOI：10.1007/s11148-019-00313-1
Improvement of Concrete Heat Resistance
来源期刊：Refractories and Industrial CeramicsDOI：10.1007/s11148-019-00356-4
Effect of Quartzite Heat Treatment on Induction Furnace Lining Failure Mechanism
来源期刊：Refractories and Industrial CeramicsDOI：10.1007/s11148-019-00310-4
Correction to: Physical and Technological Aspects of Pulsed Laser Cutting of Cavities in Ceramics
来源期刊：Refractories and Industrial CeramicsDOI：10.1007/s11148-019-00296-z
The Influence of Carbon Sorbent Surface Properties on the Adsorption of Poly- and Heterocyclic Aromatic Hydrocarbons
来源期刊：Refractories and Industrial CeramicsDOI：10.1007/s11148-019-00321-1
Determination of Chemically Bound Water in Metakaolin
来源期刊：Refractories and Industrial CeramicsDOI：10.1007/s11148-019-00290-5
Highly Refractory Alumina-Periclase-Carbon Ceramic Materials Based on a Spinel Binder
来源期刊：Refractories and Industrial CeramicsDOI：10.1007/s11148-019-00253-w
Effect of Hercynite Spinel on the Technological Properties of MCZ Products Used for Lining Cement Rotary Kilns
来源期刊：Refractories and Industrial CeramicsDOI：10.1007/s11148-019-00334-w
Cerium Dioxide-Based High Temperature Heaters for Operation in Air
来源期刊：Refractories and Industrial CeramicsDOI：10.1007/s11148-019-00328-8
Development and Implementation of an Innovative Metal Receiver for a Slab CBCM Tundish
来源期刊：Refractories and Industrial CeramicsDOI：10.1007/s11148-019-00322-0
Preparation and Properties of Fused Zircon
来源期刊：Refractories and Industrial CeramicsDOI：10.1007/s11148-019-00347-5
Highly Porous Granulated Corundum Filler of Alumina-Foam Polystyrene Mixture. Part 9. Physicotechnical Properties of Porous Corundum Granules and Fillers Based on Them1
来源期刊：Refractories and Industrial CeramicsDOI：10.1007/s11148-019-00259-4
Effect of Additives on Physicomechanical Properties of High-Strength AS-Materials
来源期刊：Refractories and Industrial CeramicsDOI：10.1007/s11148-019-00306-0
Mechanism of Self-Propagating High-Temperature Synthesis of AlB2–Al2O3 Composite Powders
来源期刊：Refractories and Industrial CeramicsDOI：10.1007/s11148-019-00307-z
Permeable Cermet SHS-Materials Based on Alloy-Steel Scale and Ilmenite for Cleaning Diesel Engine Exhaust Gases
来源期刊：Refractories and Industrial CeramicsDOI：10.1007/s11148-019-00351-9
Composite Ceramic Based on Silicon Carbide
来源期刊：Refractories and Industrial CeramicsDOI：10.1007/s11148-019-00335-9
Genesis of Ecotechnology Efficiency in the Production of Dust-Forming Materials
来源期刊：Refractories and Industrial CeramicsDOI：10.1007/s11148-019-00319-9
Impulse Laser Effect on Graphitized Surface of Y–TZP-Ceramics
来源期刊：Refractories and Industrial CeramicsDOI：10.1007/s11148-019-00332-y
Features Determining the Melting Temperature of Slag-Forming Mixtures for Steel Continuous Casting
来源期刊：Refractories and Industrial CeramicsDOI：10.1007/s11148-019-00338-6
Optimized Processes for Flame Guncreting and Effective Guncrete Mortars for Hot Repairs to Non-Ferrous Metallurgy Equipment
来源期刊：Refractories and Industrial CeramicsDOI：10.1007/s11148-019-00323-z
