The Journal of Engineering Tribology publishes high-quality, peer-reviewed papers from academia and industry worldwide on the engineering science associated with tribology and its applications."I am proud to say that I have been part of the tribology research community for almost 20 years. That community has always seemed to me to be highly active, progressive, and closely knit. The conferences are well attended and are characterised by a warmth and friendliness that transcends national boundaries. I see Part J as being an important part of that community, giving us an outlet to publish and promote our scholarly activities. I very much look forward to my term of office as editor of your Journal. I hope you will continue to submit papers, help out with reviewing, and most importantly to read and talk about the work you will find there." Professor Rob Dwyer-Joyce, Sheffield University, UKThis journal is a member of the Committee on Publication Ethics (COPE).
工程摩擦学杂志出版高质量的，来自世界学术界和工业界的同行评审论文，关于与摩擦学及其应用相关的工程科学。“我很自豪地说，我已经成为摩擦学研究社区的一员近20年了。在我看来，这个社区一直是高度活跃、进步、紧密联系。会议参加人数众多，其特点是超越国界的热情友好。我认为J部分是该社区的重要组成部分，给我们一个发表和推广我们学术活动的渠道。我非常期待我担任你们期刊编辑的任期。我希望你们继续提交论文，帮助复习，最重要的是阅读和谈论你们在那里会找到的工作。"英国谢菲尔德大学的Rob Dwyer-Joyce教授本杂志是出版伦理委员会(COPE)的成员。
Contact of rough surfaces: Modeling adhesion in advanced multiasperity models
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering TribologyDOI：10.1177/1350650119838669
Modeling and analysis of the nonlinear indentation problems of functionally graded elastic layered solids
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering TribologyDOI：10.1177/1350650119851691
Analysis of general low-amplitude roughness in rolling–sliding elastohydrodynamic contacts including thermal effects
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering TribologyDOI：10.1177/1350650119841454
Investigation of tool geometry in nanoscale cutting single-crystal copper by molecular dynamics simulation
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering TribologyDOI：10.1177/1350650119826448
A fault diagnosis method combined with compound multiscale permutation entropy and particle swarm optimization–support vector machine for roller bearings diagnosis
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering TribologyDOI：10.1177/1350650118788929
Numerical analysis of the coupling between frictionally excited thermoelastic instability and thermal buckling in automotive clutches
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering TribologyDOI：10.1177/1350650118772664
Effect of nanoparticles on the tribo-layers and the tribology of a steel-on-steel couple
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering TribologyDOI：10.1177/1350650118765005
Corrosion and tribological behaviour in a 3.5% NaCl solution of vacuum arc deposited ZrCN and Zr–Cr–Si–C–N coatings
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering TribologyDOI：10.1177/1350650118774132
Lubrication in hot die forging processes
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering TribologyDOI：10.1177/1350650118784728
Lubrication performance of planar thrust bearing with consideration of roughness of the surfaces
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering TribologyDOI：10.1177/1350650118813818
Characteristics of the tribological properties of oxide layers obtained via thermal oxidation on titanium Grade 2
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering TribologyDOI：10.1177/1350650118769116
A comprehensive study of the effects of honing patterns on twin-land oil control rings friction using both a numerical model and a floating liner engine
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering TribologyDOI：10.1177/1350650118774395
Development of the improved Preston equation for abrasive flow machining of aerofoil structures and components
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering TribologyDOI：10.1177/1350650118817694
Preparation and characterization of electrodeposited Ni–TiC, Ni–TiN, and Ni–TiC–TiN composite coatings on tungsten carbide cutting tool
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering TribologyDOI：10.1177/1350650119841214
Possibility of elasto-hydrostatic evolved-gas bearing as one of the mechanisms of superlubricity
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering TribologyDOI：10.1177/1350650117746025
Failure stress modification in fatigue life models for rolling bearings
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering TribologyDOI：10.1177/1350650119838895
A wear model for subrough surface contacts of martensitic steels
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering TribologyDOI：10.1177/1350650119840251
Effect of conical micro-grooved texture on tool–chip friction property and cutting performance of WC-TiC/Co cemented carbide tools
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering TribologyDOI：10.1177/1350650118804907
Discussion on the influence of driving parameters of civilian cars on motor oil degradation
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering TribologyDOI：10.1177/1350650118776567
Influence of local turbulent flow on the performance of a mixed-lubrication bearing
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering TribologyDOI：10.1177/1350650118818303
Effect of profile modification on the performance of spur gears in isothermal mixed-EHL regime using load-sharing concept
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering TribologyDOI：10.1177/1350650118806802
Evolution of the road bitumen/aggregate interface under traffic-induced polishing
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering TribologyDOI：10.1177/1350650119829370
Stability analysis of a rigid rotor supported by two-lobe hydrodynamic journal bearings operating with a non-Newtonian lubricant
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering TribologyDOI：10.1177/1350650118806377
Oil change interval evaluation of civilian cars in urban traffic condition
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering TribologyDOI：10.1177/1350650118809772
Study on dynamic characteristics of gas films of spherical spiral groove hybrid gas bearings
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering TribologyDOI：10.1177/1350650118823892
Numerical modeling and analysis of the noncontacting impulse gas face seals
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering TribologyDOI：10.1177/1350650118817188
Tribological behavior of BK7 optical glass at elevated temperatures
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering TribologyDOI：10.1177/1350650118788756
Analysis of steady-state frictional rolling contact problems in Schapery–nonlinear viscoelasticity
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering TribologyDOI：10.1177/1350650118806675
An accurate method for determination of the performance characteristics of membrane-type restrictors
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering TribologyDOI：10.1177/1350650118791903
Capacity evaluation on Cu rolling tribological/electric contact pairs under various contact load and applied voltage
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering TribologyDOI：10.1177/1350650119826424
Performance evaluation of vegetable base oils relative to mineral base oils in the lubrication of cold forming processes of 2024 aluminum alloy
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering TribologyDOI：10.1177/1350650118813801
Identification of dynamic coefficients in circular journal bearings from unbalance response and complementary equations
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering TribologyDOI：10.1177/1350650118818345
Tangential motion mechanism and reverse hydrodynamic effects of acoustic platform with nonparallel squeeze film
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering TribologyDOI：10.1177/1350650118774426
Comparison of the characteristics of aerostatic journal bearings considering misalignment under pure-static and hybrid condition
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering TribologyDOI：10.1177/1350650118800616
Influence of surface functional parameters on friction behavior and elastic–plastic deformation of grinding surface in mixed lubrication state
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering TribologyDOI：10.1177/1350650118806375
Abrasive wear behaviors of high-vanadium alloy steel using the dry sand/rubber wheel apparatus
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering TribologyDOI：10.1177/1350650119846005
Reducing friction power losses of flywheel energy storage systems using PTFE composites: A technical note
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering TribologyDOI：10.1177/1350650119836817
Parameter design methodologies for vertical skewed line gears taking lubrication performance into account
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering TribologyDOI：10.1177/1350650119843049
Experimental and numerical investigation on thermodynamic performance of full-floating ring bearings with circumferential oil groove
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering TribologyDOI：10.1177/1350650119826421
Direct and indirect corrosion wear performance of AISI 630 steel for the slipper/swashplate pair in a water hydraulic pump
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering TribologyDOI：10.1177/1350650119841193
Vacuum tribological properties of a composite Mo–MoS2film after atomic oxygen exposure irradiation
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering TribologyDOI：10.1177/1350650119827427
Frictional behaviors in piston ring-cylinder liner system of diesel engine with solid particles considered
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering TribologyDOI：10.1177/1350650119834421
Modeling of the drag torque of the disengaged grooved wet clutches with waviness
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering TribologyDOI：10.1177/1350650118812283
Performance enhancement of spur gear formed through asymmetric tooth
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering TribologyDOI：10.1177/1350650119837822
Evaluation of tribological performance of carbon fibre reinforced epoxy composites loaded with graphite platelets under reciprocating linear motion
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering TribologyDOI：10.1177/1350650119826443
The flow-difference feedback iteration method for aerostatic thrust bearings and its convergence characteristics
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering TribologyDOI：10.1177/1350650119846230
Effect of bump structural friction on the performance of bump foil bearing and rotor dynamic behavior: Experimental study
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering TribologyDOI：10.1177/1350650118794536
The roller chain lubricated with ferrofluids
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering TribologyDOI：10.1177/1350650118806799
Theoretical analysis of a rolling-sliding elastohydrodynamic lubrication line contact with a subsurface inclusion:
来源期刊：NoneDOI：10.1177/1350650119826440
Investigating tire friction on snow-covered runways using electrical conductivity
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering TribologyDOI：10.1177/1350650118822420
