Manufacturing industries throughout the world are changing very rapidly. New concepts and methods are being developed and exploited to enable efficient and effective manufacturing. Existing manufacturing processes are being improved to meet the requirements of lean and agile manufacturing. The aim of the Journal of Engineering Manufacture is to provide a focus for these developments in engineering manufacture by publishing original papers and review papers covering technological and scientific research, developments and management implementation in manufacturing. This journal is also peer reviewed.Contributions are welcomed in the broad areas of manufacturing processes, manufacturing technology and factory automation, digital manufacturing, design and manufacturing systems including management relevant to engineering manufacture. Of particular interest at the present time would be papers concerned with digital manufacturing, metrology enabled manufacturing, smart factory, additive manufacturing and composites as well as specialist manufacturing fields like nanotechnology, sustainable & clean manufacturing and bio-manufacturing.Articles may be Research Papers, Reviews, Technical Notes, or Short Communications.
世界各地的制造业正在迅速变化。正在开发和利用新的概念和方法，以实现高效和有效的制造。正在改进现有的制造流程，以满足精益和敏捷制造的要求。《工程制造》杂志的宗旨是通过发表有关制造业技术和科学研究、发展和管理实施的原创论文和评论论文，为工程制造业的这些发展提供一个焦点。该期刊也是同行评审的。欢迎在制造过程、制造技术和工厂自动化、数字制造、设计和制造系统（包括与工程制造相关的管理）等广泛领域发表文章。目前特别感兴趣的是有关数字制造、计量制造、智能工厂、增材制造和复合材料以及纳米技术、可持续清洁制造和生物制造等专业制造领域的论文。文章可以是研究论文、综述、技术笔记或简短交流。
Application of the auxiliary wheel cleaning jet in the plunge cylindrical grinding with Minimum Quantity Lubrication technique under various flow rates
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering ManufactureDOI：10.1177/0954405418774599
Industrial internet platforms: A conceptual evaluation from a product lifecycle management perspective
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering ManufactureDOI：10.1177/0954405418760651
Chatter stability and surface location error predictions in milling with mode coupling and process damping
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering ManufactureDOI：10.1177/0954405417708225
Finite element simulation of residual stress in machining of Ti-6Al-4V with a microstructural consideration
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering ManufactureDOI：10.1177/0954405418769927
The drilling of carbon fibre composite–aluminium stacks and its effect on hole quality and integrity
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering ManufactureDOI：10.1177/0954405417728312
Fabrication and experimental investigation of magnetic field assisted powder mixed electrical discharge machining on machining of aluminum 6061 alloy
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering ManufactureDOI：10.1177/0954405419838954
A novel method for predicting degrees of crystallinity in injection molding during packing stage
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering ManufactureDOI：10.1177/0954405417718593
Variation modeling and analysis with interval approach for the assembly of compliant aeronautical structures
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering ManufactureDOI：10.1177/0954405418755823
Optimization of roller burnishing process using Kriging model to improve surface properties
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering ManufactureDOI：10.1177/0954405419835295
Drilling of micro-holes on titanium alloy using pulsed Nd:YAG laser: Parametric appraisal and prediction of performance characteristics
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering ManufactureDOI：10.1177/0954405418805604
Modeling, microstructure, and mechanical properties of dissimilar 2017A and 5083 aluminum alloys friction stir welds
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering ManufactureDOI：10.1177/0954405417740923
Kinematic calibration and error compensation of a hexaglide parallel manipulator
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering ManufactureDOI：10.1177/0954405417713235
Theoretical, numerical and experimental investigation of hydro-mechanical deep drawing of steel/polymer/steel sandwich sheets
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering ManufactureDOI：10.1177/0954405418780173
Optimal deposition orientation in fused deposition modeling for maximizing the strength of three-dimensional printed truss-like structures
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering ManufactureDOI：10.1177/0954405418774603
Investigating the impact of tool inertia on machinability of a β-titanium alloy using tool deflection and acoustic emission
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering ManufactureDOI：10.1177/0954405418802319
Adaptive on-line compensation model on positioning error of ball screw feed drive systems used in computerized numerical controlled machine tools
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering ManufactureDOI：10.1177/0954405417752512
A cutting sequence optimization method based on tabu search algorithm for complex parts machining
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering ManufactureDOI：10.1177/0954405417752527
Influence of rotational speed on mechanical features of thermally drilled holes in dual-phase steel
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering ManufactureDOI：10.1177/0954405418805601
A design of CNC architecture based on cloud computing
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering ManufactureDOI：10.1177/0954405418774601
Inline measurement strategy for additive manufacturing
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering ManufactureDOI：10.1177/0954405418755826
Optimal design of a novel 4-degree-of-freedom parallel mechanism with flexible orientation capability
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering ManufactureDOI：10.1177/0954405417731469
Study on the surface forming mechanism of the solid–liquid two-phase grinding fluid polishing pipe based on large eddy simulation
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering ManufactureDOI：10.1177/0954405419841814
Experimental study of coverage constraint abrasive flow machining of titanium alloy artificial joint surface
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering ManufactureDOI：10.1177/0954405419840553
A hybrid fabrication approach and profile error compensation for silicon aspheric optics
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering ManufactureDOI：10.1177/0954405417733018
Research on the optimal combination and scheduling method of crowdsourcing members in a cloud design platform
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering ManufactureDOI：10.1177/0954405419855874
Investigation on the bubble dynamic behaviors and corresponding regulation method in underwater flux-cored arc welding
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering ManufactureDOI：10.1177/0954405418789983
A method to control the amount of unbalance propagation in precise cylindrical components assembly
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering ManufactureDOI：10.1177/0954405419840548
A workpiece registration and localization adjustment method with contact inspection under multi-tolerance conditions
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering ManufactureDOI：10.1177/0954405418789978
Time-varying process model for intelligent prediction of strain and temperature in micro-turning process
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering ManufactureDOI：10.1177/0954405417708223
A new type of bi-material coin
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering ManufactureDOI：10.1177/0954405419840566
Analysis of vibration from low-rigidity contact in belt grinding of blisk blade
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering ManufactureDOI：10.1177/0954405419840563
Study on the mechanism of preload decrease of bolted joints subjected to transversal vibration loading
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering ManufactureDOI：10.1177/0954405419838675
Study on the extraction and reconstruction of arbitrary frequency topography from precision machined surfaces
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering ManufactureDOI：10.1177/0954405418802307
An approach for the design of multi-material mechanical components
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering ManufactureDOI：10.1177/0954405418763995
Construction of next-generation superplastic forming using additive manufacturing and numerical techniques
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering ManufactureDOI：10.1177/0954405417716493
Theoretical prediction and experimental verification of the unbalanced magnetic force in air bearing motor spindles
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering ManufactureDOI：10.1177/0954405419838656
Investigation on the fabrication of dicing blades with different sintering methods for machining hard-brittle material wafers
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering ManufactureDOI：10.1177/0954405418802302
Research on parametric modeling and grinding methods of bottom edge of toroid-shaped end-milling cutter
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering ManufactureDOI：10.1177/0954405417717547
Modeling and adaptive compensation of tooth surface contour error for internal gearing power honing
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering ManufactureDOI：10.1177/0954405418780169
A novel approach of fault-influencing factors analysis for high-voltage switchgears quality supervision based on industrial big data
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering ManufactureDOI：10.1177/0954405419839908
Manufacturing service order allocation in the context of social manufacturing based on Stackelberg game
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering ManufactureDOI：10.1177/0954405418808190
Optimal control simulation of elliptical shaft center orbit with the hydraulic servo system
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering ManufactureDOI：10.1177/0954405417728307
Experimental study on cutting comparison of structured cutting tools in dry cutting of EN19 alloy steel
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering ManufactureDOI：10.1177/0954405417731464
Effect of slotted electrodes on improvement in machining performance of large-scale electrical discharge machining
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering ManufactureDOI：10.1177/0954405417752528
Experiments and efficient simulations of distortions of laser beam–welded thin-sheet close beam steel structures
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering ManufactureDOI：10.1177/0954405417749625
Research on machining topography of point grinding based on correlation function method
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering ManufactureDOI：10.1177/0954405418755827
Superposition method to reduce the computation time in shape-memory alloy–based tool clamp design
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering ManufactureDOI：10.1177/0954405417731468
Analysis of the minimum chip thickness during turning of duplex stainless steel
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering ManufactureDOI：10.1177/0954405418790772
Elastic analytical solutions and angular distributions near spot weld nugget in lap-shear specimens
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering ManufactureDOI：10.1177/0954405417718592
Study on the cavity closure behavior of steel ingots during open die forging
来源期刊：Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering ManufactureDOI：10.1177/0954405419840562
