Optics & Laser Technology aims to provide a vehicle for the publication of a broad range of high quality research and review papers in those fields of scientific and engineering research appertaining to the development and application of the technology of optics and lasers. Papers describing original work in these areas are submitted to rigorous refereeing prior to acceptance for publication.The scope of Optics & Laser Technology encompasses, but is not restricted to, the following areas:•development in all types of lasers•developments in optoelectronic devices and photonics•developments in new photonics and optical concepts•developments in conventional optics, optical instruments and components•techniques of optical metrology, including interferometry and optical fibre sensors•LIDAR and other non-contact optical measurement techniques, including optical methods in heat and fluid flow•applications of lasers to materials processing, optical NDT display (including holography) and optical communication•research and development in the field of laser safety including studies of hazards resulting from the applications of lasers (laser safety, hazards of laser fume)•developments in optical computing and optical information processing•developments in new optical materials•developments in new optical characterization methods and techniques•developments in quantum optics•developments in light assisted micro and nanofabrication methods and techniques•developments in nanophotonics and biophotonics•developments in imaging processing and systems
《光学与激光技术》旨在提供一个平台，在与光学和激光技术的开发和应用相关的科学和工程研究领域发表广泛的高质量研究和评论论文。光学与激光技术的范围包括但不限于以下领域：·所有类型激光器的发展·光电子器件和光子学的发展·新光子学和光学概念的发展·传统光学、光学仪器和元件的发展·光学计量技术，包括干涉测量和光纤传感器·激光雷达和其他非接触光学测量技术，包括热和流体流动中的光学方法·激光在材料加工、光学NDT显示（包括全息术）和光通信中的应用·激光安全领域的研究和发展，包括激光应用引起的危害（激光安全、激光烟雾的危害）的研究·光学计算和光学信息处理的发展·新光学材料的发展·新光学表征方法和技术的发展·量子光学的发展·光辅助微米和纳米制造方法和技术的发展·纳米光子学和生物光子学的发展·成像处理和系统的发展
Effect of laser peening on friction and wear behavior of medical Ti6Al4V alloy
来源期刊：Optics and Laser TechnologyDOI：10.1016/J.OPTLASTEC.2018.08.005
Investigation of electromagnetic response of terahertz metamaterial by using split-disk resonator
来源期刊：Optics and Laser TechnologyDOI：10.1016/J.OPTLASTEC.2018.10.040
Tunable color of Tb3+/Eu3+/Tm3+-coactivated K3La(PO4)2 via energy transfer: A single-phase white-emitting phosphor
来源期刊：Optics and Laser TechnologyDOI：10.1016/J.OPTLASTEC.2019.02.021
Investigation of powder fed laser cladding of NiCr-chromium carbides single-tracks on titanium aluminide substrate
来源期刊：Optics and Laser TechnologyDOI：10.1016/J.OPTLASTEC.2019.105652
Preparation, characterization, and optical spectroscopic studies of nanocrystalline tungsten oxide WO3
来源期刊：Optics and Laser TechnologyDOI：10.1016/J.OPTLASTEC.2018.10.036
A rapid one-step nanosecond laser process for fabrication of super-hydrophilic aluminum surface
来源期刊：Optics and Laser TechnologyDOI：10.1016/J.OPTLASTEC.2019.04.015
Numerical study for prediction of optimum operational parameters in laser welding of NiTi alloy
来源期刊：Optics and Laser TechnologyDOI：10.1016/J.OPTLASTEC.2019.05.010
Effect of rare earth oxide on microstructure and high temperature oxidation properties of laser cladding coatings on 5CrNiMo die steel substrate
来源期刊：Optics and Laser TechnologyDOI：10.1016/J.OPTLASTEC.2019.105597
Near UV based Dy3+ ions doped alkaline-earth chloro borate glasses for white LED’s and visible lasers
来源期刊：Optics and Laser TechnologyDOI：10.1016/J.OPTLASTEC.2019.105646
Multiple-pulse Laser-induced breakdown spectroscopy for monitoring the femtosecond laser micromachining process of glass
来源期刊：Optics and Laser TechnologyDOI：10.1016/J.OPTLASTEC.2018.10.005
Numerical study of the dynamics of the hole formation during drilling with combined ms and ns laser pulses
来源期刊：Optics and Laser TechnologyDOI：10.1016/J.OPTLASTEC.2018.10.057
Diode-pumped passively Q-switched Nd:GdYTaO4 laser based on two-dimensional WS2 nanosheet
来源期刊：Optics and Laser TechnologyDOI：10.1016/J.OPTLASTEC.2018.08.022
Mode-locked ytterbium-doped fiber laser based on offset-spliced graded index multimode fibers
来源期刊：Optics and Laser TechnologyDOI：10.1016/J.OPTLASTEC.2019.105576
Experimental investigations of nonlinear optical properties of soda-lime glasses and theoretical study of self-compression of fs laser pulses
来源期刊：Optics and Laser TechnologyDOI：10.1016/J.OPTLASTEC.2019.03.041
An ultrasonic sensor composed of a fiber Bragg grating with an air bubble for underwater object detection
来源期刊：Optics and Laser TechnologyDOI：10.1016/J.OPTLASTEC.2018.11.027
Experimental characterization of laser trepanning performance enhanced by water-based ultrasonic assistance
来源期刊：Optics and Laser TechnologyDOI：10.1016/J.OPTLASTEC.2018.08.018
Univariate and multivariate calibration strategies in combination with laser-induced breakdown spectroscopy (LIBS) to determine Ti on sunscreen: A different sample preparation procedure
来源期刊：Optics and Laser TechnologyDOI：10.1016/J.OPTLASTEC.2018.08.056
Maskless lithography based on digital micromirror device (DMD) and double sided microlens and spatial filter array
来源期刊：Optics and Laser TechnologyDOI：10.1016/J.OPTLASTEC.2019.01.001
Prediction model of the depth of the femtosecond laser micro-milling of PMMA
来源期刊：Optics and Laser TechnologyDOI：10.1016/J.OPTLASTEC.2019.105713
Effects of electromagnetic field on the laser direct metal deposition of austenitic stainless steel
来源期刊：Optics and Laser TechnologyDOI：10.1016/J.OPTLASTEC.2019.105586
Selection of Nd:YAG laser beam micro-drilling parameters using multi-criteria decision making methods
来源期刊：Optics and Laser TechnologyDOI：10.1016/J.OPTLASTEC.2019.105596
Investigation of laser bending parameters on the residual stress and bending angle of St-Ti bimetal using FEM and neural network
来源期刊：Optics and Laser TechnologyDOI：10.1016/J.OPTLASTEC.2019.03.030
Imaging biosensor based on planar optical waveguide
来源期刊：Optics and Laser TechnologyDOI：10.1016/J.OPTLASTEC.2019.02.034
Inhomogeneous thermal-mechanical analysis of 316L butt joint in laser welding
来源期刊：Optics and Laser TechnologyDOI：10.1016/J.OPTLASTEC.2019.02.012
Butt laser welding-brazing of AZ31Mg alloy to Cu coated Ti-6Al-4V with AZ92 Mg based filler
来源期刊：Optics and Laser TechnologyDOI：10.1016/J.OPTLASTEC.2019.04.024
Demodulation method of Fabry-Perot sensor by cascading a traditional Mach-Zehnder interferometer
来源期刊：Optics and Laser TechnologyDOI：10.1016/J.OPTLASTEC.2019.04.043
An optical fiber strain sensor by using of taper based TCF structure
来源期刊：Optics and Laser TechnologyDOI：10.1016/J.OPTLASTEC.2019.105687
Decision making two-wave mixing with rotating TiO2-supported Au-Pt nanoparticles
来源期刊：Optics and Laser TechnologyDOI：10.1016/J.OPTLASTEC.2019.105638
Research on the “∞”-shaped laser scanning welding process for aluminum alloy
来源期刊：Optics and Laser TechnologyDOI：10.1016/J.OPTLASTEC.2019.01.046
A novel optical fiber temperature sensor with polymer-metal alternating structure
来源期刊：Optics and Laser TechnologyDOI：10.1016/J.OPTLASTEC.2019.02.036
Direct oscillation at 640-nm in single longitudinal mode with a diode-pumped Pr:YLF solid-state laser
来源期刊：Optics and Laser TechnologyDOI：10.1016/J.OPTLASTEC.2019.03.025
Direct light written holographic volume grating as a novel optical platform for sensing characterization of solution
来源期刊：Optics and Laser TechnologyDOI：10.1016/J.OPTLASTEC.2018.08.041
V-groove and parabolic array for enlarging the acceptance angle of a side-absorption concentrated photovoltaic system
来源期刊：Optics and Laser TechnologyDOI：10.1016/J.OPTLASTEC.2018.11.047
Stability evaluation of laser-MAG hybrid welding process
来源期刊：Optics and Laser TechnologyDOI：10.1016/J.OPTLASTEC.2019.03.036
Enhancing the performance of GaN based LDs by using low In content InGaN instead of GaN as lower waveguide layer
来源期刊：Optics and Laser TechnologyDOI：10.1016/J.OPTLASTEC.2018.09.021
Highly uniform and polarization-independent Y-branch with mode filter based on deeply etched silica-on-silicon waveguide
来源期刊：Optics and Laser TechnologyDOI：10.1016/J.OPTLASTEC.2018.09.034
Alternated Q-switched and gain-switched dual-pulse Yb fiber laser with Tm-Ho co-doped fiber as saturable absorber
来源期刊：Optics and Laser TechnologyDOI：10.1016/J.OPTLASTEC.2018.12.009
Theoretical modeling and analysis for laser shock tensioning process of circular saw blade
来源期刊：Optics and Laser TechnologyDOI：10.1016/J.OPTLASTEC.2019.01.047
Influence of aluminum nanoparticles and binders on the laser initiation of cyclotrimethylenetrinitramine
来源期刊：Optics and Laser TechnologyDOI：10.1016/J.OPTLASTEC.2019.105677
Development of a non-contact plasma processing technique to mitigate chemical network defects of fused silica with life enhancement of He-Ne laser device
来源期刊：Optics and Laser TechnologyDOI：10.1016/J.OPTLASTEC.2018.12.028
Enhanced corrosion behavior of selective laser melting S136 mould steel reinforced with nano-TiB2
来源期刊：Optics and Laser TechnologyDOI：10.1016/J.OPTLASTEC.2019.105588
Ultrasensitive long-period gratings sensor works near dispersion turning point and mode transition region by optimally designing a photonic crystal fiber
来源期刊：Optics and Laser TechnologyDOI：10.1016/J.OPTLASTEC.2018.11.011
Growth, structural, third order nonlinear optical properties, dielectric properties, conductivity mechanisms and spectroscopic characterization of a luminescent material trans-diaqua-bis(pyridine-2-carboxylato)-cobalt(ii) dihydrate for optoelectronic applications
来源期刊：Optics and Laser TechnologyDOI：10.1016/J.OPTLASTEC.2019.105664
Random lasing emission from FTO and glass substrates coated with dye doped SU-8 epoxy based polymer
来源期刊：Optics and Laser TechnologyDOI：10.1016/J.OPTLASTEC.2019.105602
Optical film design of low-glare LED panel light
来源期刊：Optics and Laser TechnologyDOI：10.1016/J.OPTLASTEC.2018.09.031
Fourth harmonic generation based on miniaturized tunable bow-tie resonators
来源期刊：Optics and Laser TechnologyDOI：10.1016/J.OPTLASTEC.2019.01.002
Study on the impact of high-order effects on the evolution of a trapped soliton pumped by a high-power pulse
来源期刊：Optics and Laser TechnologyDOI：10.1016/J.OPTLASTEC.2019.105699
Integrating-bucket phase stabilization method for fiber-optic fringe projector
来源期刊：Optics and Laser TechnologyDOI：10.1016/J.OPTLASTEC.2019.05.017
Experimental and theoretical analysis of passively Q-switched lasers with a high output coupling
来源期刊：Optics and Laser TechnologyDOI：10.1016/J.OPTLASTEC.2019.105645
Influence of the laser thermal effect on the droplet transfer behavior in laser-CMT welding
来源期刊：Optics and Laser TechnologyDOI：10.1016/J.OPTLASTEC.2019.105728
