Optics and Lasers in Engineering aims at providing an international forum for the interchange of information on the development of optical techniques and laser technology in engineering. Emphasis is placed on contributions targeted at the practical use of methods and devices, the development and enhancement of solutions and new theoretical concepts for experimental methods.Optics and Lasers in Engineering reflects the main areas in which optical methods are being used and developed for an engineering environment. Manuscripts should offer clear evidence of novelty and significance. Papers focusing on parameter optimization or computational issues are not suitable. Similarly, papers focussed on an application rather than the optical method fall outside the journal's scope. The scope of the journal is defined to include the following:-Optical Metrology-Optical Methods for 3D visualization and virtual engineering-Optical Techniques for Microsystems-Imaging, Microscopy and Adaptive Optics-Computational Imaging-Laser methods in manufacturing-Integrated optical and photonic sensors-Optics and Photonics in Life Science-Hyperspectral and spectroscopic methods-Infrared and Terahertz techniques
工程光学和激光旨在为工程光学技术和激光技术的发展提供一个信息交流的国际论坛。重点放在针对方法和设备的实际应用、解决方案的开发和增强以及实验方法的新理论概念的贡献上。工程中的光学和激光反映了在工程环境中使用和开发光学方法的主要领域。手稿应提供新奇性和重要性的明确证据。论文重点是参数优化或计算问题不适合。同样，关注应用而非光学方法的论文也不在该杂志的范围之内。该杂志的范围包括：-光学计量学-三维可视化和虚拟工程的光学方法-微系统的光学技术-成像、显微镜和自适应光学-计算成像-制造中的激光方法-集成光学和光子传感器-生命科学中的光学和光子学-超光谱和光谱方法-红外和太赫兹技术
On symmetric color image encryption system with permutation-diffusion simultaneous operation
来源期刊：Optics and Lasers in EngineeringDOI：10.1016/J.OPTLASENG.2018.11.015
A portable sensor for in-situ measurement of ammonia based on near-infrared laser absorption spectroscopy
来源期刊：Optics and Lasers in EngineeringDOI：10.1016/J.OPTLASENG.2018.12.005
Effects of CeO2 on microstructure and properties of TiC/Ti2Ni reinforced Ti-based laser cladding composite coatings
来源期刊：Optics and Lasers in EngineeringDOI：10.1016/J.OPTLASENG.2019.03.001
A deep-learning-based approach for fast and robust steel surface defects classification
来源期刊：Optics and Lasers in EngineeringDOI：10.1016/J.OPTLASENG.2019.05.005
Semi-supervised defect classification of steel surface based on multi-training and generative adversarial network
来源期刊：Optics and Lasers in EngineeringDOI：10.1016/J.OPTLASENG.2019.06.020
Chaos-based image encryption algorithm with orbit perturbation and dynamic state variable selection mechanisms
来源期刊：Optics and Lasers in EngineeringDOI：10.1016/J.OPTLASENG.2018.12.002
Quaternary gray-code phase unwrapping for binary fringe projection profilometry
来源期刊：Optics and Lasers in EngineeringDOI：10.1016/J.OPTLASENG.2019.04.009
Real-time 3D surface-shape measurement using background-modulated modified Fourier transform profilometry with geometry-constraint
来源期刊：Optics and Lasers in EngineeringDOI：10.1016/J.OPTLASENG.2018.11.014
Rapid high-quality 3D micro-machining by optimised efficient ultrashort laser ablation
来源期刊：Optics and Lasers in EngineeringDOI：10.1016/J.OPTLASENG.2018.11.001
In-situ 3D shape and recession measurements of ablative materials in an arc-heated wind tunnel by UV stereo-digital image correlation
来源期刊：Optics and Lasers in EngineeringDOI：10.1016/J.OPTLASENG.2018.10.022
Camera calibration method based on optimal polarization angle
来源期刊：Optics and Lasers in EngineeringDOI：10.1016/J.OPTLASENG.2018.09.009
Computational analysis of Bayer colour filter arrays and demosaicking algorithms in digital photoelasticity
来源期刊：Optics and Lasers in EngineeringDOI：10.1016/J.OPTLASENG.2019.06.004
A two-step calibration method of lenslet-based light field cameras
来源期刊：Optics and Lasers in EngineeringDOI：10.1016/J.OPTLASENG.2018.11.024
All-optical carbon dioxide remote sensing using rare earth doped chalcogenide fibers
来源期刊：Optics and Lasers in EngineeringDOI：10.1016/J.OPTLASENG.2019.06.018
A novel two-step noise reduction approach for interferometric phase images
来源期刊：Optics and Lasers in EngineeringDOI：10.1016/J.OPTLASENG.2019.03.008
Local Hermite (LH) Method: An accurate and robust smooth technique for high-gradient strain reconstruction in digital image correlation
来源期刊：Optics and Lasers in EngineeringDOI：10.1016/J.OPTLASENG.2018.08.022
Asymmetric multi-user optical cryptosystem based on polar decomposition and Shearlet transform
来源期刊：Optics and Lasers in EngineeringDOI：10.1016/J.OPTLASENG.2019.03.024
Low cost digital holographic microscope for 3-D cell imaging by integrating smartphone and DVD optical head
来源期刊：Optics and Lasers in EngineeringDOI：10.1016/J.OPTLASENG.2018.10.009
Experimental study on compressive buckling behavior of J-stiffened composite panels
来源期刊：Optics and Lasers in EngineeringDOI：10.1016/J.OPTLASENG.2019.02.014
Phase transformation effect in distortion and residual stress of thin-sheet laser welded Ti-alloy
来源期刊：Optics and Lasers in EngineeringDOI：10.1016/J.OPTLASENG.2019.06.008
Microstructure and phase transformation behaviour of a Fe/Mn/Si/Cr/Ni alloy coating by laser cladding
来源期刊：Optics and Lasers in EngineeringDOI：10.1016/J.OPTLASENG.2019.06.003
Texture preservation and speckle reduction in optical coherence tomography using the shearlet-based total variation algorithm
来源期刊：Optics and Lasers in EngineeringDOI：10.1016/J.OPTLASENG.2019.06.014
Automatic detection and counting of phase objects in raw holograms of digital holographic microscopy via deep learning
来源期刊：Optics and Lasers in EngineeringDOI：10.1016/J.OPTLASENG.2019.02.010
Rapid tracking of extrinsic projector parameters in fringe projection using machine learning
来源期刊：Optics and Lasers in EngineeringDOI：10.1016/J.OPTLASENG.2018.08.018
Advanced spatial spectrum fitting algorithm for significantly improving the noise resistance ability of self-calibration phase shifting interferometry
来源期刊：Optics and Lasers in EngineeringDOI：10.1016/J.OPTLASENG.2018.09.007
Projector distortion residual compensation in fringe projection system
来源期刊：Optics and Lasers in EngineeringDOI：10.1016/J.OPTLASENG.2018.10.015
Multi-distance phase retrieval with a weighted shrink-wrap constraint
来源期刊：Optics and Lasers in EngineeringDOI：10.1016/J.OPTLASENG.2018.09.017
Application of pulsed Yb: Fiber laser to surface treatment of Al alloys for improved adhesive bonded performance
来源期刊：Optics and Lasers in EngineeringDOI：10.1016/J.OPTLASENG.2019.03.017
Auto-calibration and real-time external parameter correction for stereo digital image correlation
来源期刊：Optics and Lasers in EngineeringDOI：10.1016/J.OPTLASENG.2019.03.018
Automated surface feature detection using fringe projection: An autoregressive modeling-based approach
来源期刊：Optics and Lasers in EngineeringDOI：10.1016/J.OPTLASENG.2019.05.014
A pseudo-3D ball lattice artifact and method for evaluating the metrological performance of structured-light 3D scanners
来源期刊：Optics and Lasers in EngineeringDOI：10.1016/J.OPTLASENG.2019.03.005
Binarization of optical fringe patterns with intensity inhomogeneities based on modified FCM algorithm
来源期刊：Optics and Lasers in EngineeringDOI：10.1016/J.OPTLASENG.2019.06.025
Improved phase reconstruction using linear programming for dual-wavelength digital holography
来源期刊：Optics and Lasers in EngineeringDOI：10.1016/J.OPTLASENG.2019.01.005
Resolution enhancement of confocal fluorescence microscopy via two illumination beams
来源期刊：Optics and Lasers in EngineeringDOI：10.1016/J.OPTLASENG.2019.05.018
Influence of non-uniform airflow on optical deformation measurement in subsonic conditions
来源期刊：Optics and Lasers in EngineeringDOI：10.1016/J.OPTLASENG.2019.06.009
Theoretical proof of parameter optimization for sinusoidal fringe projection profilometry
来源期刊：Optics and Lasers in EngineeringDOI：10.1016/J.OPTLASENG.2019.07.001
Laser-induced frontside etching of silicon using 1550-nm nanosecond laser pulses
来源期刊：Optics and Lasers in EngineeringDOI：10.1016/J.OPTLASENG.2019.06.012
Optimization of rotating orthogonal polarization imaging in turbid media via the Mueller matrix
来源期刊：Optics and Lasers in EngineeringDOI：10.1016/J.OPTLASENG.2019.04.001
Generalized phase-shifting real-time holography based on photorefractive crystals
来源期刊：Optics and Lasers in EngineeringDOI：10.1016/J.OPTLASENG.2019.02.012
Non-iterative direct binary search algorithm for fast generation of binary holograms
来源期刊：Optics and Lasers in EngineeringDOI：10.1016/J.OPTLASENG.2019.06.017
Quasi single-frame measurements with phase-stepped ESPI
来源期刊：Optics and Lasers in EngineeringDOI：10.1016/J.OPTLASENG.2019.04.012
Enhanced depth estimation of integral imaging using pixel blink rate
来源期刊：Optics and Lasers in EngineeringDOI：10.1016/J.OPTLASENG.2018.11.011
Hyperspectral image reconstruction using multi-colour and time-multiplexed LED illumination
来源期刊：Optics and Lasers in EngineeringDOI：10.1016/J.OPTLASENG.2019.04.014
A fast autofocus method based on virtual differential optical path in digital holography: Theory and applications
来源期刊：Optics and Lasers in EngineeringDOI：10.1016/J.OPTLASENG.2019.04.006
Direct phase retrieval for simultaneous dual-wavelength off-axis digital holography
来源期刊：Optics and Lasers in EngineeringDOI：10.1016/J.OPTLASENG.2019.04.013
Effects of different annealing processes on optoelectronic and bending fatigue properties of AgZr and ITO/AgZr thin film metallic glass
来源期刊：Optics and Lasers in EngineeringDOI：10.1016/J.OPTLASENG.2018.11.009
Partially-coherent spirally-polarized gradual-edge imaging
来源期刊：Optics and Lasers in EngineeringDOI：10.1016/J.OPTLASENG.2018.09.003
Spectroscopic investigation of laser produced plasma of carbon nanotube reinforced AlMg5 metal matrix nanocomposites
来源期刊：Optics and Lasers in EngineeringDOI：10.1016/J.OPTLASENG.2019.03.007
FPGA-based interrogation controller with optimized pipeline architecture for very large-scale fiber-optic interferometric sensor arrays
来源期刊：Optics and Lasers in EngineeringDOI：10.1016/J.OPTLASENG.2019.04.026
Optimization of diffractive optical elements with millions of pixels using progressive error reduction algorithm (PERA)
来源期刊：Optics and Lasers in EngineeringDOI：10.1016/J.OPTLASENG.2019.05.023
