Metal Science and Heat Treatment presents new fundamental and practical research in physical metallurgy, heat treatment equipment, and surface engineering.Topics covered include:New structural, high temperature, tool and precision steels;Cold-resistant, corrosion-resistant and radiation-resistant steels;Steels with rapid decline of induced properties;Alloys with shape memory effect;Bulk-amorphyzable metal alloys;Microcrystalline alloys;Nano materials and foam materials for medical use.
金属科学和热处理介绍物理冶金学、热处理设备和表面工程的新的基础和实践研究。涉及的主题包括：新型结构钢、高温钢、工具钢和精密钢;耐寒、耐腐蚀和耐辐射钢;诱发性能迅速下降的钢具有形状记忆效应的合金大块非晶态金属合金微晶合金医用纳米材料和泡沫材料。
Effect of Heat Treatment on the Structure and Phase Composition of a High-Temperature Nickel Alloy Obtained by Laser Cladding
来源期刊：Metal Science and Heat TreatmentDOI：10.1007/s11041-019-00347-9
Effect of Heat Treatment on the Microstructure and Mechanical Properties of the Friction Stir Processed AZ91D Magnesium Alloy
来源期刊：Metal Science and Heat TreatmentDOI：10.1007/s11041-019-00422-1
Effect of Electron Beam Power Density on the Structure of Titanium Under Non-Vacuum Electron-Beam Treatment
来源期刊：Metal Science and Heat TreatmentDOI：10.1007/s11041-019-00329-x
High Plastic Deformations and High Cooling Rates at the Interface of Explosion-Welded Materials
来源期刊：Metal Science and Heat TreatmentDOI：10.1007/s11041-019-00336-y
Effect of Cooling Rate on the Structure of Low-Carbon Low-Alloy Steel After Thermomechanical Controlled Processing
来源期刊：Metal Science and Heat TreatmentDOI：10.1007/s11041-019-00373-7
A Study of Plastic Strain Before and on the Yield Plateau of Steel 08G2B by Correlation of Digital Images. Part II. Functioning of Flow Channels and Zones in them
来源期刊：Metal Science and Heat TreatmentDOI：10.1007/s11041-019-00437-8
Effect of Iron and Manganese Content on the Structure of Cast Article from Aluminum Alloy AK12
来源期刊：Metal Science and Heat TreatmentDOI：10.1007/s11041-019-00318-0
Modeling and Optimization of the Effect of Sintering Parameters on the Hardness of Copper/Graphene Nanosheet Composites by Response Surface Methodology
来源期刊：Metal Science and Heat TreatmentDOI：10.1007/s11041-019-00327-z
Raising the Corrosion Resistance of Plasma-Nitrided Steel 45 (AISI 1045) by Preliminary Sandblasting
来源期刊：Metal Science and Heat TreatmentDOI：10.1007/s11041-019-00360-y
A Study of Modes of Hardening Heat Treatment of Titanium Alloy VT23
来源期刊：Metal Science and Heat TreatmentDOI：10.1007/s11041-019-00345-x
Microstructure and Wear of a Sintered Composite with a Magnesium Alloy AZ91 Matrix Reinforced with ZrO2 Particles
来源期刊：Metal Science and Heat TreatmentDOI：10.1007/s11041-019-00424-z
Simulation of the Kinetics of Dynamic Recrystallization of Alloy KhN55MBYu-VD During Hot Deformation
来源期刊：Metal Science and Heat TreatmentDOI：10.1007/s11041-019-00326-0
Effect of Medium-Temperature Additional Tempering on the Carbide Phase and Cold Resistance of Heat-Hardenable Steel 09G2SA-A
来源期刊：Metal Science and Heat TreatmentDOI：10.1007/s11041-019-00346-w
Formation of Structure and Properties of Titanium Under Laser Surface Alloying with Nickel and Manganese
来源期刊：Metal Science and Heat TreatmentDOI：10.1007/s11041-019-00338-w
Formation of Coatings on Titanium Alloys by Melting with a Beam of Relativistic Electrons
来源期刊：Metal Science and Heat TreatmentDOI：10.1007/s11041-019-00332-2
Post Weld Annealing of Welded Joints of Refractory Titanium Alloys VT41 AND VT8-1
来源期刊：Metal Science and Heat TreatmentDOI：10.1007/s11041-019-00431-0
Crystallographic Structure of Alloy ZhS32-VI Obtained by Selective Laser Melting of Powder Composition on Single-Crystal Substrate
来源期刊：Metal Science and Heat TreatmentDOI：10.1007/s11041-019-00357-7
Effect of Heat Treatment on Microhardness and Fracture Resistance of the NWZ of a Welded Joint of Microalloyed Steel EH36 with Thickness 150 mm for Offshore Oil-Gas Platforms
来源期刊：Metal Science and Heat TreatmentDOI：10.1007/s11041-019-00377-3
Estimation of Hardness During Heat Treatment of Steels
来源期刊：Metal Science and Heat TreatmentDOI：10.1007/s11041-019-00444-9
Experience of Preparation of Quality Structure and Properties of the Surface of Rolled Bars for Cold Heading
来源期刊：Metal Science and Heat TreatmentDOI：10.1007/s11041-019-00455-6
Thermal Effect on the Structural and Phase Condition and Mechanical Properties of Ultrafine-Grained Titanium Alloy VT16 in the Temperature Range of 293 – 923 K
来源期刊：Metal Science and Heat TreatmentDOI：10.1007/s11041-019-00323-3
Deep Alloying of Steels with Refractory Additions with the Use of Pulsed Laser Radiation
来源期刊：Metal Science and Heat TreatmentDOI：10.1007/s11041-019-00387-1
Reversible Changes in the Coercivity of Alloys of the Fe – Cr – Co System Under Cyclic Heat Treatment
来源期刊：Metal Science and Heat TreatmentDOI：10.1007/s11041-019-00395-1
Determination of the Parameters of Precipitates in Aged Mg – 8% Zn – 4% Al – 0.2% Cr – 0.5% Bi Alloy
来源期刊：Metal Science and Heat TreatmentDOI：10.1007/s11041-019-00356-8
Isotropic Alloys of the Sm – Co System for Ring Magnets with Radial Magnetization
来源期刊：Metal Science and Heat TreatmentDOI：10.1007/s11041-019-00393-3
Effect of the Rate of Multiaxial Compression at Room Temperature on the Evolution of Microstructure of Commercial-Purity Aluminum
来源期刊：Metal Science and Heat TreatmentDOI：10.1007/s11041-019-00382-6
Surface Hardening of Titanium Under Non-Vacuum Electron-Beam Cladding of an Aluminum-Containing Powder Mixture
来源期刊：Metal Science and Heat TreatmentDOI：10.1007/s11041-019-00328-y
A Study of Crystallographic Texture in a Refractory Nickel Alloy After Selective Laser Melting and Heat Treatment
来源期刊：Metal Science and Heat TreatmentDOI：10.1007/s11041-019-00389-z
Inhomogeneous Solid Solutions in Alloys of the Al – Cu – Li System: Possible Structure of Clusters
来源期刊：Metal Science and Heat TreatmentDOI：10.1007/s11041-019-00379-1
Portable Charging Device with High-Coercivity Permanent Magnets
来源期刊：Metal Science and Heat TreatmentDOI：10.1007/s11041-019-00411-4
Formation of Transition Zones Under Spark Plasma Sintering of Dissimilar Steels
来源期刊：Metal Science and Heat TreatmentDOI：10.1007/s11041-019-00337-x
Nonmetallic Inclusions in Alloys of the Fe – Co – Ni – Cu – Al – Ti System with Hafnium and Niobium
来源期刊：Metal Science and Heat TreatmentDOI：10.1007/s11041-019-00358-6
A Study of Parameters of Nitriding Processes. Part 1
来源期刊：Metal Science and Heat TreatmentDOI：10.1007/s11041-019-00398-y
Structure and Mechanical Properties of High-Strength Austenitic-Martensitic Trip-Steel VNS9-Sh
来源期刊：Metal Science and Heat TreatmentDOI：10.1007/s11041-019-00369-3
Structural Features and Application Prospects for High-Nitrogen Austenitic Steels
来源期刊：Metal Science and Heat TreatmentDOI：10.1007/s11041-019-00418-x
Effect of Back-and-Forth Transfer of Iron and Chromium in Formation of Coatings by Iodine Transport
来源期刊：Metal Science and Heat TreatmentDOI：10.1007/s11041-019-00374-6
Possibility of Elevation of Mechanical Properties of Sand-Cast Copper Silumins
来源期刊：Metal Science and Heat TreatmentDOI：10.1007/s11041-019-00322-4
Formation of Grain and Packet-Lath Structure in Low-Carbon Steels After Quenching from Intercritical Temperature Range
来源期刊：Metal Science and Heat TreatmentDOI：10.1007/s11041-019-00383-5
Prevention of Crack Formation in Electron-Beam Welded Joints of Dissimilar Metal Compounds (TiNi/Ti6Al4V)
来源期刊：Metal Science and Heat TreatmentDOI：10.1007/s11041-019-00432-z
A Study of Texture Component Distribution Over the Cross Section of an Aluminum Alloy 8011 Billet with Hot Rolling in a Four-Stand Continuous Group
来源期刊：Metal Science and Heat TreatmentDOI：10.1007/s11041-019-00420-3
A Study of the Parameters of Nitriding Processes. Part 2
来源期刊：Metal Science and Heat TreatmentDOI：10.1007/s11041-019-00429-8
Crack Resistance of Volume-Hardened Railroad Rails with Transverse Cracks in the Head
来源期刊：Metal Science and Heat TreatmentDOI：10.1007/s11041-019-00361-x
Titanium Structure and Property Formation with Chromium Laser Surface Alloying
来源期刊：Metal Science and Heat TreatmentDOI：10.1007/s11041-019-00427-w
A Study of the Effect of Modes of Isothermal Quenching on the Structure and Properties of Alloy V-1341T
来源期刊：Metal Science and Heat TreatmentDOI：10.1007/s11041-019-00380-8
Warm Deformation of Alloy Al – 4.7% Mg – 0.32% Mn – 0.21% Sc – 0.09% Zr
来源期刊：Metal Science and Heat TreatmentDOI：10.1007/s11041-019-00439-6
Model of Precipitation Hardening of Al – Mg – Si Alloys Under Aging
来源期刊：Metal Science and Heat TreatmentDOI：10.1007/s11041-019-00445-8
Deformation Behavior of Finely-Lamellar Pearlite During Multiple Cold Plastic Deformation of Eutectoid Steel
来源期刊：Metal Science and Heat TreatmentDOI：10.1007/s11041-019-00415-0
Effect of Heat Treatment on Microstructure and Mechanical Properties of Alloy Mg – 10% Gd – 3% Y – 0.6% Zr
来源期刊：Metal Science and Heat TreatmentDOI：10.1007/s11041-019-00441-y
Relation Between the Microstructure of Cold Resistant Steel 20GL and Some Parameters of the Melting Process
来源期刊：Metal Science and Heat TreatmentDOI：10.1007/s11041-019-00436-9
Comparison of the Effects of Carbides and Nonmetallic Inclusions on Formation of Fatigue Microcracks in Steels
来源期刊：Metal Science and Heat TreatmentDOI：10.1007/s11041-019-00456-5
