Mechanics of Materials is a forum for original scientific research on the flow, fracture, and general constitutive behavior of geophysical, geotechnical and technological materials, with balanced coverage of advanced technological and natural materials, with balanced coverage of theoretical, experimental, and field investigations. Of special concern are macroscopic predictions based on microscopic models, identification of microscopic structures from limited overall macroscopic data, experimental and field results that lead to fundamental understanding of the behavior of materials, and coordinated experimental and analytical investigations that culminate in theories with predictive quality.
材料力学是一个关于地球物理学、岩土工程和技术材料的流动、断裂和一般本构行为的原创科学研究的论坛，平衡覆盖先进技术和天然材料，平衡覆盖理论、实验和现场调查。特别关注的是基于微观模型的宏观预测、从有限的总体宏观数据中识别微观结构、导致对材料行为的基本理解的实验和现场结果、以及最终形成具有预测质量的理论的协调的实验和分析研究。
Application of slitting method to characterize the effects of thermal fatigue, lay-up arrangement and MWCNTs on the residual stresses of laminated composites
来源期刊：Mechanics of MaterialsDOI：10.1016/J.MECHMAT.2019.04.008
Electro-magnetostriction under large deformation : Modeling with experimental validation
来源期刊：Mechanics of MaterialsDOI：10.1016/J.MECHMAT.2018.10.001
Improved design of fused deposition modeling equipment for 3D printing of high-performance PEEK parts
来源期刊：Mechanics of MaterialsDOI：10.1016/J.MECHMAT.2019.103139
Experimental study of the size effect on transverse cracking in cross-ply laminates and comparison with the main theoretical models
来源期刊：Mechanics of MaterialsDOI：10.1016/J.MECHMAT.2018.09.006
Modeling and experimental verification of nonlinear behavior of cellulose nanocrystals reinforced poly(lactic acid) composites
来源期刊：Mechanics of MaterialsDOI：10.1016/J.MECHMAT.2019.05.003
An investigation of back stress formulations under cyclic loading
来源期刊：Mechanics of MaterialsDOI：10.1016/J.MECHMAT.2019.01.005
Low-frequency micro-structured mechanical metamaterials
来源期刊：Mechanics of MaterialsDOI：10.1016/J.MECHMAT.2018.12.008
Modeling dislocations with arbitrary character angle in face-centered cubic transition metals using the phase-field dislocation dynamics method with full anisotropic elasticity
来源期刊：Mechanics of MaterialsDOI：10.1016/j.mechmat.2019.103200
Modeling the non-linear elastic response of periodic lattice materials
来源期刊：Mechanics of MaterialsDOI：10.1016/J.MECHMAT.2018.11.010
A three-dimensional phenomenological model for shape memory alloys including two-way shape memory effect and plasticity
来源期刊：Mechanics of MaterialsDOI：10.1016/J.MECHMAT.2019.103085
A new long-term indentation relaxation method to measure creep properties at the micro-scale with application to fused silica and PMMA
来源期刊：Mechanics of MaterialsDOI：10.1016/J.MECHMAT.2019.103095
Homogenization accounting for size effects in particulate composites due to general interfaces
来源期刊：Mechanics of MaterialsDOI：10.1016/j.mechmat.2019.103204
Manganese-based layered perovskite solid–solid phase change material: Synthesis, characterization and thermal stability study
来源期刊：Mechanics of MaterialsDOI：10.1016/J.MECHMAT.2019.05.004
Optimize epoxy matrix with RSM/CCD method and influence of multi-wall carbon nanotube on mechanical properties of epoxy/polyurethane
来源期刊：Mechanics of MaterialsDOI：10.1016/j.mechmat.2019.103154
Finite element modeling of the puncture-cutting response of soft material by a pointed blade
来源期刊：Mechanics of MaterialsDOI：10.1016/J.MECHMAT.2019.103082
Investigation on dynamic hardness and high strain rate indentation size effects in aluminium (110) using nano-impact
来源期刊：Mechanics of MaterialsDOI：10.1016/J.MECHMAT.2019.03.008
Effect of grain boundary sliding on fracture toughness of ceramic/graphene composites
来源期刊：Mechanics of MaterialsDOI：10.1016/J.MECHMAT.2019.103126
Micromechanical model for prediction of the fatigue limit for unidirectional fibre composites
来源期刊：Mechanics of MaterialsDOI：10.1016/J.MECHMAT.2019.01.023
A micromechanically motivated lower order strain gradient model for plastic behavior of functionally graded crystalline micro beam structures
来源期刊：Mechanics of MaterialsDOI：10.1016/J.MECHMAT.2019.103135
Constitutive modeling of shape memory alloys under cyclic loading considering permanent strain effects
来源期刊：Mechanics of MaterialsDOI：10.1016/J.MECHMAT.2018.11.013
Deflecting mode-I cracks in anisotropic materials
来源期刊：Mechanics of MaterialsDOI：10.1016/J.MECHMAT.2019.05.007
Coupling crystal plasticity and continuum damage mechanics for creep assessment in Cr-based power-plant steel
来源期刊：Mechanics of MaterialsDOI：10.1016/J.MECHMAT.2019.01.006
Cylindrical Voids Induced Deformation Response of Single Crystal Coppers during Low-Speed Shock Compressions: A Molecular Dynamics Study
来源期刊：Mechanics of MaterialsDOI：10.1016/j.mechmat.2019.103167
Molecular dynamics simulation of the uniaxial tensile test of silicon nanowires using the MEAM potential
来源期刊：Mechanics of MaterialsDOI：10.1016/J.MECHMAT.2019.103140
On the contact and adhesion of a piezoelectric half-space under a rigid punch with an axisymmetric power-law profile
来源期刊：Mechanics of MaterialsDOI：10.1016/J.MECHMAT.2018.11.018
Enforcing shaping of thin gel sheets by anisotropic swelling
来源期刊：Mechanics of MaterialsDOI：10.1016/j.mechmat.2019.103199
Microimaging-informed continuum micromechanics accurately predicts macroscopic stiffness and strength properties of hierarchical plant culm materials
来源期刊：Mechanics of MaterialsDOI：10.1016/J.MECHMAT.2019.01.009
A ductile fracture model based on continuum thermodynamics and damage
来源期刊：Mechanics of MaterialsDOI：10.1016/j.mechmat.2019.103197
Damage evolution and plasticity development of concrete materials subjected to freeze-thaw during the load process
来源期刊：Mechanics of MaterialsDOI：10.1016/j.mechmat.2019.103192
Effect of reinforcement bending on the elastic properties of interpenetrating phase composites
来源期刊：Mechanics of MaterialsDOI：10.1016/J.MECHMAT.2019.103071
A thermodynamic constitutive model with temperature effect based on particle rearrangement for geomaterials
来源期刊：Mechanics of MaterialsDOI：10.1016/j.mechmat.2019.103180
Crack propagation in a PVA dual-crosslink hydrogel: Crack tip fields measured using digital image correlation
来源期刊：Mechanics of MaterialsDOI：10.1016/j.mechmat.2019.103158
Influence of surface energy and thermal effects on cavitation instabilities in metallic glasses
来源期刊：Mechanics of MaterialsDOI：10.1016/J.MECHMAT.2019.01.019
A numerical study on the in-plane dynamic crushing of self-similar hierarchical honeycombs
来源期刊：Mechanics of MaterialsDOI：10.1016/J.MECHMAT.2019.103151
A three-scale poromechanical model for swelling porous media incorporating solvation forces: Application to enhanced coalbed methane recovery
来源期刊：Mechanics of MaterialsDOI：10.1016/J.MECHMAT.2019.01.021
A Visco-Hyperelastic Softening Model for Predicting the Strain Rate Effects of 3D-Printed Soft Wavy Interfacial Layer
来源期刊：Mechanics of MaterialsDOI：10.1016/J.MECHMAT.2019.103128
1-second-resolved strain mapping in Ti-6Al-4V alloys during dwell fatigue in SEM by video sampling moiré
来源期刊：Mechanics of MaterialsDOI：10.1016/J.MECHMAT.2019.03.002
Multi-scale identification of the viscoelastic behaviour of composite materials through a non-destructive test
来源期刊：Mechanics of MaterialsDOI：10.1016/J.MECHMAT.2019.103137
Concentrated sources on the interface of diffusive bimaterial media: The steady-state deformation
来源期刊：Mechanics of MaterialsDOI：10.1016/J.MECHMAT.2018.10.003
A modified constitutive model for tensile deformation of 9%Cr steel under prior fatigue loading
来源期刊：Mechanics of MaterialsDOI：10.1016/J.MECHMAT.2019.103093
Shielding or anti-shielding effects of solute hydrogen near a finite length crack: A new possible mechanism of hydrogen embrittlement
来源期刊：Mechanics of MaterialsDOI：10.1016/J.MECHMAT.2019.02.015
Improved approximation of transverse and shear stiffness for high volume fraction uniaxial composites
来源期刊：Mechanics of MaterialsDOI：10.1016/J.MECHMAT.2018.11.014
Interface fracture of micro-architectured glass: Inverse identification of interface properties and a novel analytical model
来源期刊：Mechanics of MaterialsDOI：10.1016/J.MECHMAT.2019.103107
Modelling the stress-induced multi-step martensite transformation of single crystal NiMnGa ferromagnetic shape memory alloys
来源期刊：Mechanics of MaterialsDOI：10.1016/J.MECHMAT.2019.04.014
Electrochemical viscoelastic modeling to predict quasi-static and dynamic response of IPMC actuators
来源期刊：Mechanics of MaterialsDOI：10.1016/j.mechmat.2019.103172
Investigation on failure properties and constitutive modeling of EPDM used for pulse separation device
来源期刊：Mechanics of MaterialsDOI：10.1016/J.MECHMAT.2019.103127
Effects of permeability conditions on time-dependent fracture of poroelastic media
来源期刊：Mechanics of MaterialsDOI：10.1016/j.mechmat.2019.103156
Modeling mechanical behaviors of plant stems undergoing microstructural changes
来源期刊：Mechanics of MaterialsDOI：10.1016/j.mechmat.2019.103175
Influence of temperature cycles on strength and microstructure of spray-deposited Si–Al CE9F alloy
来源期刊：Mechanics of MaterialsDOI：10.1016/J.MECHMAT.2019.01.018
An investigation on the behavior of anisothermal adhesive contact based on Maugis–Dugdale model
来源期刊：Mechanics of MaterialsDOI：10.1016/J.MECHMAT.2019.04.020
