Maderas-Cienc Tecnol publishes inedits and original research articles in Spanish and English. The contributions for their publication should be unpublished and the journal is reserved all the rights of reproduction of the content of the same ones. All the articles are subjected to evaluation to the Publishing Committee or external consultants. At least two reviewers under double blind system. Previous acceptance of the Publishing Committee, summaries of thesis of Magíster and Doctorate are also published, technical opinions, revision of books and reports of congresses, related with the Science and the Technology of the Wood. The journal have not articles processing and submission charges.
Maderas-Cienc Tecnol以西班牙语和英语出版年编辑和原创研究文章。为他们出版的稿件应不予发表，该杂志保留复制相同内容的所有权利。所有文章都要接受出版委员会或外部顾问的评估。双盲制度下至少有两名审评人员。以前接受出版委员会，论文摘要的Magíster和博士学位也出版，技术意见，修订的书籍和会议报告，与科学和技术的木材。该刊不收稿件加工费和投稿费。
SPECIFIC GAS PERMEABILITY OF NORMAL AND NANOSILVER-IMPREGNATED SOLID WOOD SPECIES AS INFLUENCED BY HEAT-TREATMENT
来源期刊：Maderas-ciencia Y TecnologiaDOI：10.4067/S0718-221X2019005000108
Selection of Superior clones of Corymbia hybrids based on wood and charcoal properties.
来源期刊：Maderas-ciencia Y TecnologiaDOI：10.4067/s0718-221x2019005000417
TOXICITY POTENTIAL OF HEARTWOOD EXTRACTIVES FROM TWO MULBERRY SPECIES AGAINST Heterotermes Indicola
来源期刊：Maderas-ciencia Y TecnologiaDOI：10.4067/S0718-221X2019005000203
Evaluation of degradation in chemical compounds of wood in historical buildings using FT-IR and FT-Raman vibrational spectroscopy
来源期刊：Maderas-ciencia Y TecnologiaDOI：10.4067/S0718-221X2019005000310
Bio-coal production with agroforestry biomasses in Brazil
来源期刊：Maderas-ciencia Y TecnologiaDOI：10.4067/S0718-221X2019005000308
Energy valorization of woody biomass by torrefaction treatment: A Brazilian experimental study
来源期刊：Maderas-ciencia Y TecnologiaDOI：10.4067/S0718-221X2019005000302
Dynamic and static mechanical properties of Eucalyptus nitens thermally modified in an open and closed reactor system
来源期刊：Maderas-ciencia Y TecnologiaDOI：10.4067/S0718-221X2019005000201
Fractionation of Pinus radiata wood by combination of steam explosion and organosolv delignification.
来源期刊：Maderas-ciencia Y TecnologiaDOI：10.4067/s0718-221x2019005000414
THERMAL DEGRADATION OF ORIENTAL BEECH WOOD IMPREGNATED WITH DIFFERENT INORGANIC SALTS
来源期刊：Maderas-ciencia Y TecnologiaDOI：10.4067/S0718-221X2019005000204
OPTIMIZATION OF WOOD MACHINING PARAMETERS IN CNC ROUTERS: TAGUCHI ORTHOGONAL ARRAY BASED SIMULATED ANGLING ALGORITHM
来源期刊：Maderas-ciencia Y TecnologiaDOI：10.4067/S0718-221X2019005000406
A new approach to wood protection: Preliminary study of biologically synthesized copper oxide nanoparticle formulation as an environmental friendly wood protectant against decay fungi and termites
来源期刊：Maderas-ciencia Y TecnologiaDOI：10.4067/S0718-221X2019005000307
The quality comparison of particleboards produced from heartwood and sapwood of European larch
来源期刊：Maderas-ciencia Y TecnologiaDOI：10.4067/S0718-221X2019005000407
Fibre morphological variations of some Nigerian guinea savannah timber species
来源期刊：Maderas-ciencia Y TecnologiaDOI：10.4067/S0718-221X2019005000211
Study on compressive stress relaxation behavior of beech based on the finite element method
来源期刊：Maderas-ciencia Y TecnologiaDOI：10.4067/s0718-221x2019005000102
Layer thickness performances of coatings on MDF: Polyurethane and cellulosic paints
来源期刊：Maderas-ciencia Y TecnologiaDOI：10.4067/S0718-221X2019005000304
Influence of combined heat treatment and densification on mechanical properties of poplar wood
来源期刊：Maderas-ciencia Y TecnologiaDOI：10.4067/s0718-221x2019005000405
Surface properties of novel wood-based reinforced composites manufactured from crushed veneers and phenolic resins
来源期刊：Maderas-ciencia Y TecnologiaDOI：10.4067/S0718-221X2019005000206
EVALUATION OF THE STRENGTH, SORPTION AND THERMAL PROPERTIES OF BAMBOO PLASTIC COMPOSITES
来源期刊：Maderas-ciencia Y TecnologiaDOI：10.4067/S0718-221X2019005000101
Physicochemical properties of Pinus massoniana wood subjected to silicone oil heat treatment
来源期刊：Maderas-ciencia Y TecnologiaDOI：10.4067/S0718-221X2019005000409
Resistance improvement of rubberwood treated with zinc oxide nanoparticles and phenolic resin against white-rot fungi, Pycnoporus sanguineus.
来源期刊：Maderas-ciencia Y TecnologiaDOI：10.4067/S0718-221X2019005000403
Evaluation of dimensional stability, surface roughness, colour, flexural properties and decay resistance of thermally modified Acacia auriculiformis
来源期刊：Maderas-ciencia Y TecnologiaDOI：10.4067/S0718-221X2019005000401
Carbon stored by furnishing wood-based products: An Italian case study
来源期刊：Maderas-ciencia Y TecnologiaDOI：10.4067/S0718-221X2019005000106
Process layout planning and optimised product range selection in manufacture of wooden construction sets
来源期刊：Maderas-ciencia Y TecnologiaDOI：10.4067/S0718-221X2019005000205
Characterization of thermally modified short and long rotation teaks and the effects on coatings performance
来源期刊：Maderas-ciencia Y TecnologiaDOI：10.4067/S0718-221X2019005000208
Application of paints to decrease air permeability of oriented strand boards
来源期刊：Maderas-ciencia Y TecnologiaDOI：10.4067/S0718-221X2019005000110
Investigation of some surface properties and thermogravimetric analysis of veneer sheets treated with fire retardants
来源期刊：Maderas-ciencia Y TecnologiaDOI：10.4067/S0718-221X2019005000103
Machining properties of Melia dubia wood.
来源期刊：Maderas-ciencia Y TecnologiaDOI：10.4067/S0718-221X2019005000207
Energy efficiency performance enhancement of industrial conventional wood drying kiln by adding forced ventilation and waste heat recovery system: A comparative study
来源期刊：Maderas-ciencia Y TecnologiaDOI：10.4067/S0718-221X2019005000410
Analysis of wood products from an added value perspective: The Uruguayan forestry case
来源期刊：Maderas-ciencia Y TecnologiaDOI：10.4067/S0718-221X2019005000303
Physical properties of Guazuma crinita by conventional methods and near infrared spectroscopy.
来源期刊：Maderas-ciencia Y TecnologiaDOI：10.4067/S0718-221X2019005000408
Relación entre parámetros de producción y propiedades estructurales de madera laminada encolada de Eucalyptus grandis
来源期刊：Maderas-ciencia Y TecnologiaDOI：10.4067/S0718-221X2019005000305
Colorimetría en la madera de Prosopis alba
来源期刊：Maderas-ciencia Y TecnologiaDOI：10.4067/S0718-221X2019005000311
Effects of saturated vapor pre-steaming on drying strain in Asian white birch: experimentation and modelling.
来源期刊：Maderas-ciencia Y TecnologiaDOI：10.4067/S0718-221X2019005000107
Effect of adhesive quantity on selected physico-mechanical properties of bamboo glulam.
来源期刊：Maderas-ciencia Y TecnologiaDOI：10.4067/S0718-221X2019005000111
RELATIONSHIP BETWEEN THE DYNAMIC AND STATIC MODULUS OF ELASTICITY IN STANDING TREES AND SAWN LUMBERS OF Paulownia fortune PLANTED IN IRAN
来源期刊：Maderas-ciencia Y TecnologiaDOI：10.4067/s0718-221x2019005000104
Decay resistance of scotch pine wood impregnated with Agaricus campestris bio-protective extract
来源期刊：Maderas-ciencia Y TecnologiaDOI：10.4067/S0718-221X2019005000312
Application of resource efficient and cleaner production through best management practice in a pallet manufacturer sawmill located in the city of Puyo-Ecuador
来源期刊：Maderas-ciencia Y TecnologiaDOI：10.4067/S0718-221X2019005000309
Recommendation of non-destructive sampling method for density estimation of the Eucalyptus wood
来源期刊：Maderas-ciencia Y TecnologiaDOI：10.4067/S0718-221X2019005000412
EVALUATION OF WOOD SURFACE COATING PERFORMANCE USING WATER BASED, SOLVENT BASED AND POWDER COATING
来源期刊：Maderas-ciencia Y TecnologiaDOI：10.4067/S0718-221X2019005000404
Assessment of physical, mechanical, and biological properties of bamboo plastic composite made with polylactic acid
来源期刊：Maderas-ciencia Y TecnologiaDOI：10.4067/s0718-221x2019005000415
Effects of wood flour on the mechanical, thermal and morphological properties of poly (L-lactic acid)-chitosan biopolymer composites.
来源期刊：Maderas-ciencia Y TecnologiaDOI：10.4067/s0718-221x2019005000416
Characterization of pacific silver fir impregnated with extractives from western redcedar
来源期刊：Maderas-ciencia Y TecnologiaDOI：10.4067/S0718-221X2019005000301
Assessing the natural durability of different tropical timbers in soil-bed tests
来源期刊：Maderas-ciencia Y TecnologiaDOI：10.4067/s0718-221x2019005000210
Stability of planed and precision planed solid wood surfaces due to wetting
来源期刊：Maderas-ciencia Y TecnologiaDOI：10.4067/s0718-221x2019005000112
Variación del contenido de humedad verde y de la densidad básica de la madera en árboles de Eucalyptus nitens con dimensiones aserrables
来源期刊：Maderas-ciencia Y TecnologiaDOI：10.4067/S0718-221X2019005000313
Mechanical characteristics of impregnated white jabon wood (Anthocephalus cadamba) using merbau extractives and selected polymerised merbau extractives.
来源期刊：Maderas-ciencia Y TecnologiaDOI：10.4067/s0718-221x2019005000413
Timber grading of Pinus uncinata , a lesser known pine species from the pyrenean mountain range
来源期刊：Maderas-ciencia Y TecnologiaDOI：10.4067/S0718-221X2019005000213
Investigation of an alternative testing protocol to determine the shear strength of bamboo parallel to the grain
来源期刊：Maderas-ciencia Y TecnologiaDOI：10.4067/s0718-221x2019005000411
