Metals and Materials International publishes original papers and occasional critical reviews on all aspects of research and technology in materials engineering: physical metallurgy, materials science, and processing of metals and other materials. Emphasis is placed on those aspects of the science of materials that are concerned with the relationships among the processing, structure and properties (mechanical, chemical, electrical, electrochemical, magnetic and optical) of materials. Aspects of processing include the melting, casting, and fabrication with the thermodynamics, kinetics and modeling.
金属与材料国际出版材料工程研究和技术各方面的原创论文和偶尔的评论：物理冶金学、材料科学以及金属和其他材料的加工。重点放在材料科学中与材料的加工、结构和性质（机械、化学、电学、电化学、磁学和光学）之间的关系有关的方面。加工方面包括熔化、铸造和制造的热力学、动力学和建模。
Important Factors on the Failure of Pipeline Steels with Focus on Hydrogen Induced Cracks and Improvement of Their Resistance: Review Paper
来源期刊：Metals and Materials InternationalDOI：10.1007/s12540-019-00266-7
Microstructures and Mechanical Properties of In-Situ Al3Ti/2024 Aluminum Matrix Composites Fabricated by Ultrasonic Treatment and Subsequent Squeeze Casting
来源期刊：Metals and Materials InternationalDOI：10.1007/s12540-019-00396-y
3D Printed Parts with Honeycomb Internal Pattern by Fused Deposition Modelling; Experimental Characterization and Production Optimization
来源期刊：Metals and Materials InternationalDOI：10.1007/s12540-019-00272-9
Processing Route Effects on the Mechanical and Corrosion Properties of Dual Phase Steel
来源期刊：Metals and Materials InternationalDOI：10.1007/s12540-019-00459-0
Processing and Properties of Biodegradable Magnesium Microtubes for Using as Vascular Stents: A Brief Review
来源期刊：Metals and Materials InternationalDOI：10.1007/s12540-019-00285-4
Oxidation of Titanium Matrix Composites Reinforced with (TiB\u2009+\u2009TiC) Particulates
来源期刊：Metals and Materials InternationalDOI：10.1007/s12540-018-00212-z
Impact of Non-Reactive Ceria Nanoparticles on the Wettability and Reaction Kinetics Between Lead-Free Sn–58Bi and Cu Pad
来源期刊：Metals and Materials InternationalDOI：10.1007/s12540-019-00250-1
Mechanical Properties and Formability of Heat-Treated 7000-Series High-Strength Aluminum Alloy: Experiments and Finite Element Modeling
来源期刊：Metals and Materials InternationalDOI：10.1007/s12540-019-00353-9
New MOF-Based Corrosion Inhibitor for Carbon Steel in Acidic Media
来源期刊：Metals and Materials InternationalDOI：10.1007/s12540-019-00307-1
Effect of Pre- and Post-weld Heat Treatment on Microstructure and Mechanical Properties of GTD-111 Superalloy Welds
来源期刊：Metals and Materials InternationalDOI：10.1007/s12540-019-00465-2
Effect of Initial Grain Size on Friction Stir Weldability for Rolled and Cast CoCrFeMnNi High-Entropy Alloys
来源期刊：Metals and Materials InternationalDOI：10.1007/s12540-019-00466-1
Processing of Al/Al2O3 Composite Using Simple Shear Extrusion (SSE) Manufactured by Powder Metallurgy (PM)
来源期刊：Metals and Materials InternationalDOI：10.1007/s12540-019-00299-y
Microstructural and Inclusion Characteristics of C–Mn Steel Welds at a Minimal Level of Titanium
来源期刊：Metals and Materials InternationalDOI：10.1007/s12540-019-00390-4
Stress Corrosion Cracking of a Copper Pipe in a Heating Water Supply System
来源期刊：Metals and Materials InternationalDOI：10.1007/s12540-019-00386-0
Overview of Small Punch Test
来源期刊：Metals and Materials InternationalDOI：10.1007/s12540-019-00454-5
Effect of Solidification Mode on Microstructure and Mechanical Properties of AISI420 Steel to SAF2507 Steel Dissimilar Joint Produced by Transient Liquid Phase
来源期刊：Metals and Materials InternationalDOI：10.1007/s12540-019-00406-z
Effect of Asymmetric Rolling on the Microstructure, Mechanical Properties and Texture Evolution of Mg–8Li–3Al–1Y Alloy
来源期刊：Metals and Materials InternationalDOI：10.1007/s12540-019-00263-w
Application of Different Diffraction Peak Profile Analysis Methods to Study the Structure Evolution of Cold-Rolled Hexagonal α-Titanium
来源期刊：Metals and Materials InternationalDOI：10.1007/s12540-019-00309-z
Study on the Weldability and Mechanical Characteristics of Dissimilar Materials (Al5052-DP590) by TIG Assisted Hybrid Friction Stir Welding
来源期刊：Metals and Materials InternationalDOI：10.1007/s12540-019-00461-6
Research on the Microstructure Characteristic and Tensile Property of Laser-MIG Hybrid Welded Joint for 5A06 Aluminum Alloy
来源期刊：Metals and Materials InternationalDOI：10.1007/s12540-019-00340-0
Measurement and Theoretical Calculation Confirm the Improvement of T7651 Aging State Influenced Precipitation Characteristics on Fatigue Crack Propagation Resistance in an Al–Zn–Mg–Cu Alloy
来源期刊：Metals and Materials InternationalDOI：10.1007/s12540-019-00446-5
Investigation on Microstructure, Hardness and Wear Resistance of Electron Beam Wire-Feeding Deposited Inconel 718 Alloy Coatings
来源期刊：Metals and Materials InternationalDOI：10.1007/s12540-019-00494-x
Formation of Metastable Aluminides in Al–Sc–Ti (Zr, Hf) Cast Alloys
来源期刊：Metals and Materials InternationalDOI：10.1007/s12540-019-00397-x
New Eutectic High-Entropy Alloys Based on Co–Cr–Fe–Mo–Ni–Al: Design, Characterization and Mechanical Properties
来源期刊：Metals and Materials InternationalDOI：10.1007/s12540-019-00515-9
Deformation, Cracking and Fracture Behavior of Dynamically-Formed Oxide Layers on Molten Metals
来源期刊：Metals and Materials InternationalDOI：10.1007/s12540-019-00537-3
Microstructure and Mechanical Property Improvement of Dissimilar Metal Joints for TC4 Ti Alloy to 304 Stainless Steel Using TA2/Q235 Composite Interlayer
来源期刊：Metals and Materials InternationalDOI：10.1007/s12540-019-00507-9
Compressive Deformation Behavior of AZ31Mg Alloy Containing {10–12} Extension Twins at Different Temperature
来源期刊：Metals and Materials InternationalDOI：10.1007/s12540-019-00275-6
Improved Mg–Al–Zn Magnesium Alloys Produced by High Energy Milling and Hot Sintering
来源期刊：Metals and Materials InternationalDOI：10.1007/s12540-019-00490-1
Wear Behavior of P/M High Nb Containing γ-TiAl Alloy in Different Environments
来源期刊：Metals and Materials InternationalDOI：10.1007/s12540-019-00279-2
Numerical Analysis of Radio-Frequency Inductively Coupled Plasma Spheroidization of Titanium Metal Powder Under Single Particle and Dense Loading Conditions
来源期刊：Metals and Materials InternationalDOI：10.1007/s12540-019-00348-6
Stacked Auto-Encoder Network to Predict Tensile Deformation Behavior of a Typical Nickel-Based Superalloy Considering Portevin–Le Chatelier Effects
来源期刊：Metals and Materials InternationalDOI：10.1007/s12540-019-00435-8
Effects of Cryogenic Deformation on Second-Phase Al2Cu Particles and Mechanical Properties of 2219 Al–Cu Alloy Rings
来源期刊：Metals and Materials InternationalDOI：10.1007/s12540-019-00468-z
Hot Deformation Characteristics and Processing Map Analysis of Pre-Forged AZ80 Magnesium Alloy
来源期刊：Metals and Materials InternationalDOI：10.1007/s12540-019-00452-7
Warpage of Powder Injection Molded Copper Structure
来源期刊：Metals and Materials InternationalDOI：10.1007/s12540-019-00492-z
Compressive Properties of Electron Beam Melted Ti–6Al–4V Porous Meshes with Different Struts Distributions
来源期刊：Metals and Materials InternationalDOI：10.1007/s12540-019-00439-4
Densification and Magnetic Properties of Injection Molded Gas- and Water-Atomized Fe–Si Alloys and Effect of Fe-10.2 wt% P Addition
来源期刊：Metals and Materials InternationalDOI：10.1007/s12540-019-00308-0
Effect of Temperature and Strain Rate on the Hot Deformation Behaviour of Ferritic Stainless Steel
来源期刊：Metals and Materials InternationalDOI：10.1007/s12540-019-00316-0
Effects of the Surface Contact on the Uncertainty in Indentation Yield Strength: Surface Roughness and Angular Misalignment
来源期刊：Metals and Materials InternationalDOI：10.1007/s12540-019-00420-1
Effect of Cu Contents on Nanocluster Formation and Two-Step Aging Behavior in Al–Mg–Si Alloys
来源期刊：Metals and Materials InternationalDOI：10.1007/s12540-019-00540-8
Extraction, Distribution, and Precipitation Mechanism of TiN–MnS Complex Inclusions in Al-Killed Titanium Alloyed Interstitial Free Steel
来源期刊：Metals and Materials InternationalDOI：10.1007/s12540-019-00521-x
Anelastic and Microplastic Damping of an Mg–Zn–Y–Al Alloy
来源期刊：Metals and Materials InternationalDOI：10.1007/s12540-019-00302-6
27R-SiAlON Reinforced AlN Composite: Synthesis, Sintering and Characterization
来源期刊：Metals and Materials InternationalDOI：10.1007/s12540-019-00554-2
Phase Stability and Thermo-Physical Properties of Nickel-Aluminum Binary Chemically Disordered Systems via First-Principles Study
来源期刊：Metals and Materials InternationalDOI：10.1007/s12540-019-00568-w
Estimation of Reducibility of Sinter with Continuous Measurement of Reduction Degradation Test
来源期刊：Metals and Materials InternationalDOI：10.1007/s12540-019-00449-2
Comparison of the Crystallization Behavior of Silica Between Mg- and Al-Phosphate Used in Tension Coatings of Grain-Oriented Electrical Steel
来源期刊：Metals and Materials InternationalDOI：10.1007/s12540-019-00331-1
Effects of β Air Cooling and Subsequent Cold Rolling on Microstructure and Hardness of Zr702 Sheet
来源期刊：Metals and Materials InternationalDOI：10.1007/S12540-019-00430-Z
Pore characteristics of Lotus-Type Porous Copper Fabricated by Centrifugal Casting
来源期刊：Metals and Materials InternationalDOI：10.1007/s12540-019-00365-5
Characterization and Formation Mechanism of Ni3Si–Al2O3 Nanocomposite Prepared by Mechanochemical Reduction Method
来源期刊：Metals and Materials InternationalDOI：10.1007/s12540-019-00323-1
Effect of Synthesis Mode and Ni Particle Size on Microstructural Aspects and Hardness Properties of Combustion-Synthesized NiTi
来源期刊：Metals and Materials InternationalDOI：10.1007/s12540-019-00497-8
Morphology Evolution of Mn5Si3 Phase and Effect of Mn content on Wear Resistance of Special Brass
来源期刊：Metals and Materials InternationalDOI：10.1007/s12540-019-00243-0
