The Journal of the Mechanical Behavior of Biomedical Materials is concerned with the mechanical deformation, damage and failure under applied forces, of biological material (at the tissue, cellular and molecular levels) and of biomaterials, i.e. those materials which are designed to mimic or replace biological materials.The primary focus of the journal is the synthesis of materials science, biology, and medical and dental science. Reports of fundamental scientific investigations are welcome, as are articles concerned with the practical application of materials in medical devices. Both experimental and theoretical work is of interest; theoretical papers will normally include comparison of predictions with experimental data, though we recognize that this may not always be appropriate. The journal also publishes technical notes concerned with emerging experimental or theoretical techniques, letters to the editor and, by invitation, review articles and papers describing existing techniques for the benefit of an interdisciplinary readership.
《生物医学材料力学行为杂志》关注生物材料（组织、细胞和分子水平）和生物材料（即设计用于模拟或替代生物材料的材料）在外力作用下的机械变形、损伤和失效。该杂志的主要焦点是材料科学、生物学、医学和牙科科学的综合。欢迎基础科学研究报告，以及与医疗器械材料实际应用相关的文章。实验和理论工作都是有意义的;理论论文通常包括预测值与实验数据的比较，尽管我们承认这并不总是合适的。该杂志还出版与新兴实验或理论技术有关的技术说明、致编辑的信件，并应邀发表评论文章和介绍现有技术的论文，以供跨学科读者阅读。
Investigation of the effects of polycaprolactone molecular weight and graphene content on crystallinity, mechanical properties and shape memory behavior of polyurethane/graphene nanocomposites.
来源期刊：Journal of the mechanical behavior of biomedical materialsDOI：10.1016/j.jmbbm.2019.04.034
Mechanical performance of highly permeable laser melted Ti6Al4V bone scaffolds.
来源期刊：Journal of the mechanical behavior of biomedical materialsDOI：10.1016/j.jmbbm.2019.103517
Ultra-thin occlusal veneers bonded to enamel and made of ceramic or hybrid materials exhibit load-bearing capacities not different from conventional restorations.
来源期刊：Journal of the mechanical behavior of biomedical materialsDOI：10.1016/j.jmbbm.2018.09.041
Low-cost powder metallurgy Ti-Cu alloys as a potential antibacterial material.
来源期刊：Journal of the mechanical behavior of biomedical materialsDOI：10.1016/j.jmbbm.2019.04.004
Antibiotic elution and mechanical property of TiO2 nanotubes functionalized PMMA-based bone cements.
来源期刊：Journal of the mechanical behavior of biomedical materialsDOI：10.1016/j.jmbbm.2018.11.020
Effect of zirconia surface treatment, resin cement and aging on the load-bearing capacity under fatigue of thin simplified full-contour Y-TZP restorations.
来源期刊：Journal of the mechanical behavior of biomedical materialsDOI：10.1016/J.JMBBM.2019.04.050
Nondestructive characterization of bone tissue scaffolds for clinical scenarios.
来源期刊：Journal of the mechanical behavior of biomedical materialsDOI：10.1016/j.jmbbm.2018.08.034
Enhancement of stress corrosion cracking of AZ31 magnesium alloy in simulated body fluid thanks to cryogenic machining.
来源期刊：Journal of the mechanical behavior of biomedical materialsDOI：10.1016/j.jmbbm.2019.103429
Decellularisation affects the strain rate dependent and dynamic mechanical properties of a xenogeneic tendon intended for anterior cruciate ligament replacement.
来源期刊：Journal of the mechanical behavior of biomedical materialsDOI：10.1016/j.jmbbm.2018.11.023
Effect of zirconia polycrystal and stainless steel on the wear of resin composites, dentin and enamel.
来源期刊：Journal of the mechanical behavior of biomedical materialsDOI：10.1016/j.jmbbm.2018.12.024
Dentin pretreatment with 45S5 and niobophosphate bioactive glass: Effects on pH, antibacterial, mechanical properties of the interface and microtensile bond strength.
来源期刊：Journal of the mechanical behavior of biomedical materialsDOI：10.1016/j.jmbbm.2018.10.029
A novel micro-grooved collagen substrate for inducing vascular smooth muscle differentiation through cell tissue arrangement and nucleus remodeling.
来源期刊：Journal of the mechanical behavior of biomedical materialsDOI：10.1016/j.jmbbm.2018.10.005
Computational investigation of the effect of water on the nanomechanical behavior of bone.
来源期刊：Journal of the mechanical behavior of biomedical materialsDOI：10.1016/j.jmbbm.2019.103454
Influence of nanocellulose on mechanics and morphology of polyvinyl alcohol xerogels.
来源期刊：Journal of the mechanical behavior of biomedical materialsDOI：10.1016/j.jmbbm.2018.10.024
Development of biodegradable bioactive glass ceramics by DLP printed containing EPCs/BMSCs for bone tissue engineering of rabbit mandible defects.
来源期刊：Journal of the mechanical behavior of biomedical materialsDOI：10.1016/j.jmbbm.2019.103532
The investigation of fluid flow in cartilage contact gap.
来源期刊：Journal of the mechanical behavior of biomedical materialsDOI：10.1016/j.jmbbm.2019.04.008
New generation bulk-fill resin composites: Effects on mechanical strength and fracture reliability.
来源期刊：Journal of the mechanical behavior of biomedical materialsDOI：10.1016/j.jmbbm.2019.04.046
Experimental study on the loosening of pedicle screws implanted to synthetic bone vertebra models and under non-pull-out mechanical loads.
来源期刊：Journal of the mechanical behavior of biomedical materialsDOI：10.1016/j.jmbbm.2019.06.013
Assessment of finite element models for prediction of osteoporotic fracture.
来源期刊：Journal of the mechanical behavior of biomedical materialsDOI：10.1016/J.JMBBM.2019.05.018
Characteristics of different cathodic arc deposition coatings on CoCrMo for biomedical applications.
来源期刊：Journal of the mechanical behavior of biomedical materialsDOI：10.1016/J.JMBBM.2019.04.026
Analytical model of the elastic behavior of a modified face-centered cubic lattice structure.
来源期刊：Journal of the mechanical behavior of biomedical materialsDOI：10.1016/J.JMBBM.2019.05.043
De novo topology optimization of total ossicular replacement prostheses.
来源期刊：Journal of the mechanical behavior of biomedical materialsDOI：10.1016/j.jmbbm.2019.103541
Comparing the optical and mechanical properties of PEKK polymer when CAD/CAM milled and pressed using a ceramic pressing furnace.
来源期刊：Journal of the mechanical behavior of biomedical materialsDOI：10.1016/j.jmbbm.2018.09.039
A multi-purpose force-controlled loading device for cartilage and meniscus functionality assessment using advanced MRI techniques.
来源期刊：Journal of the mechanical behavior of biomedical materialsDOI：10.1016/j.jmbbm.2019.103428
Effect of epigallocatechin-3- gallate solutions on bond durability at the adhesive interface in caries-affected dentin.
来源期刊：Journal of the mechanical behavior of biomedical materialsDOI：10.1016/j.jmbbm.2018.11.022
Research of the role of microstructure in the wear mechanism of canine and bovine enamel.
来源期刊：Journal of the mechanical behavior of biomedical materialsDOI：10.1016/j.jmbbm.2018.12.036
Elastic properties measurement of human enamel based on resonant ultrasound spectroscopy.
来源期刊：Journal of the mechanical behavior of biomedical materialsDOI：10.1016/j.jmbbm.2018.09.014
Alternative processing methods of hybrid porous scaffolds based on gelatin and chitosan.
来源期刊：Journal of the mechanical behavior of biomedical materialsDOI：10.1016/j.jmbbm.2019.103472
Influence of nano-hydroxyapatite containing desensitizing toothpastes on the sealing ability of dentinal tubules and bonding performance of self-etch adhesives.
来源期刊：Journal of the mechanical behavior of biomedical materialsDOI：10.1016/j.jmbbm.2018.11.021
A finite element study evaluating the influence of mineralization distribution and content on the tensile mechanical response of mineralized collagen fibril networks.
来源期刊：Journal of the mechanical behavior of biomedical materialsDOI：10.1016/J.JMBBM.2019.07.019
Effects of hydrothermal aging, thermal cycling, and water storage on the mechanical properties of a machinable resin-based composite containing nano-zirconia fillers.
来源期刊：Journal of the mechanical behavior of biomedical materialsDOI：10.1016/j.jmbbm.2019.103522
Damping and mechanical behavior of metal-ceramic composites applied to novel dental restorative systems.
来源期刊：Journal of the mechanical behavior of biomedical materialsDOI：10.1016/j.jmbbm.2018.09.046
A novel thymol-doped enamel bonding system: Physico-mechanical properties, bonding strength, and biological activity.
来源期刊：Journal of the mechanical behavior of biomedical materialsDOI：10.1016/j.jmbbm.2019.103378
Mechanical properties of Bio-Ferrography isolated cancerous cells studied by atomic force microscopy.
来源期刊：Journal of the mechanical behavior of biomedical materialsDOI：10.1016/j.jmbbm.2018.12.039
Influence of saline solution absorption and compressive rate on the material properties of brain tissue.
来源期刊：Journal of the mechanical behavior of biomedical materialsDOI：10.1016/j.jmbbm.2019.05.028
Multi-modal characterization of polymeric gels to determine the influence of testing method on observed elastic modulus.
来源期刊：Journal of the mechanical behavior of biomedical materialsDOI：10.1016/j.jmbbm.2019.01.003
Synthesis, microstructure and mechanical properties of partially biobased biodegradable poly(ethylene brassylate-co-ε-caprolactone) copolyesters.
来源期刊：Journal of the mechanical behavior of biomedical materialsDOI：10.1016/j.jmbbm.2018.12.019
Osteoporosis-related variations of trabecular bone properties of proximal human humeral heads at different scale lengths.
来源期刊：Journal of The Mechanical Behavior of Biomedical MaterialsDOI：10.1016/J.JMBBM.2019.103373
Static and time-dependent mechanical response of organic matrix of bone.
来源期刊：Journal of the mechanical behavior of biomedical materialsDOI：10.1016/j.jmbbm.2018.12.031
Contact damage of human dental enamel under cyclic axial loading with abrasive particles.
来源期刊：Journal of the mechanical behavior of biomedical materialsDOI：10.1016/j.jmbbm.2019.103512
Novel adhesives for distal radius fixation: A biomechanical analysis.
来源期刊：Journal of the mechanical behavior of biomedical materialsDOI：10.1016/j.jmbbm.2018.09.011
Optimization of mechanical and tribological properties of a dental SiO2-Al2O3-K2O-CaO-P2O5 glass-ceramic.
来源期刊：Journal of the mechanical behavior of biomedical materialsDOI：10.1016/j.jmbbm.2019.103523
Design and models of helical needle geometries for core biopsies.
来源期刊：Journal of the mechanical behavior of biomedical materialsDOI：10.1016/j.jmbbm.2018.09.036
Fatigue behavior in Co-Cr-Ni-Mo medical wires drawn with different drawing practices.
来源期刊：Journal of the mechanical behavior of biomedical materialsDOI：10.1016/j.jmbbm.2019.07.027
Control of bacterial attachment by fracture topography.
来源期刊：Journal of the mechanical behavior of biomedical materialsDOI：10.1016/j.jmbbm.2018.10.020
Morphological parametric mapping of 21 skin sites throughout the body using optical coherence tomography.
来源期刊：Journal of the mechanical behavior of biomedical materialsDOI：10.1016/j.jmbbm.2019.103501
An experimental evaluation of the mechanics of bare and polymer-covered self-expanding wire braided stents.
来源期刊：Journal of the mechanical behavior of biomedical materialsDOI：10.1016/j.jmbbm.2019.103549
Dilatational and shear waves in poro-vioscoelastic media.
来源期刊：Journal of the mechanical behavior of biomedical materialsDOI：10.1016/j.jmbbm.2019.04.039
In vivo adhesive behavior of human facial skin by a modified indentation test.
来源期刊：Journal of the mechanical behavior of biomedical materialsDOI：10.1016/j.jmbbm.2019.01.013
Mechanical modeling of pimple growth.
来源期刊：Journal of the mechanical behavior of biomedical materialsDOI：10.1016/j.jmbbm.2019.04.017
