EFM covers a broad range of topics in fracture mechanics to be of interest and use to both researchers and practitioners. Contributions are welcome which address the fracture behavior of conventional engineering material systems as well as newly emerging material systems. Contributions on developments in the areas of mechanics and materials science strongly related to fracture mechanics are also welcome. Papers on fatigue are welcome if they treat the fatigue process using the methods of fracture mechanics.
EFM涵盖了断裂力学的广泛主题，对研究人员和从业人员都有意义。欢迎对传统工程材料系统以及新兴材料系统的断裂行为作出贡献。在力学和材料科学领域的发展与断裂力学密切相关的贡献也是受欢迎的。关于疲劳的论文如果是用断裂力学的方法来处理疲劳过程的话，是受欢迎的。
Length scale and mesh bias sensitivity of phase-field models for brittle and cohesive fracture
来源期刊：Engineering Fracture MechanicsDOI：10.1016/J.ENGFRACMECH.2019.106532
Coupled effects of static-dynamic strain rates on the mechanical and fracturing behaviors of rock-like specimens containing two unparallel fissures
来源期刊：Engineering Fracture MechanicsDOI：10.1016/J.ENGFRACMECH.2018.12.033
Experimental Wavelet Analysis Of Acoustic Emission Signal Propagation In CFRP
来源期刊：Engineering Fracture MechanicsDOI：10.1016/J.ENGFRACMECH.2018.05.030
Static and dynamic fracture analysis in elastic solids using a multiscale extended isogeometric analysis
来源期刊：Engineering Fracture MechanicsDOI：10.1016/J.ENGFRACMECH.2018.12.024
Effect of joint parameters on fracturing behavior of shale in notched three-point-bending test based on discrete element model
来源期刊：Engineering Fracture MechanicsDOI：10.1016/J.ENGFRACMECH.2018.11.017
Phase field method for simulating the brittle fracture of fiber reinforced composites
来源期刊：Engineering Fracture MechanicsDOI：10.1016/J.ENGFRACMECH.2019.02.033
Linear smoothed extended finite element method for fatigue crack growth simulations
来源期刊：Engineering Fracture MechanicsDOI：10.1016/J.ENGFRACMECH.2018.11.011
Simulations of cohesive fracture behavior of reinforced concrete by a fracture-mechanics-based damage model
来源期刊：Engineering Fracture MechanicsDOI：10.1016/J.ENGFRACMECH.2018.12.006
Electric current induced thermal stress around a bi-material interface crack
来源期刊：Engineering Fracture MechanicsDOI：10.1016/J.ENGFRACMECH.2019.01.004
Physics of delamination onset in unidirectional composite laminates under mixed-mode I/II loading
来源期刊：Engineering Fracture MechanicsDOI：10.1016/J.ENGFRACMECH.2019.02.013
The outstanding effect of nanomat geometry on the interlaminar fracture toughness behavior out of autoclave made glass/phenolic composites under mode-I loading
来源期刊：Engineering Fracture MechanicsDOI：10.1016/J.ENGFRACMECH.2018.10.019
Study of deformation and fracture of ZrO2+3%Y2O3 ceramics by wedge splitting of a chevron-notched specimen
来源期刊：Engineering Fracture MechanicsDOI：10.1016/J.ENGFRACMECH.2019.106573
Phase field modeling of interfacial damage in heterogeneous media with stiff and soft interphases
来源期刊：Engineering Fracture MechanicsDOI：10.1016/J.ENGFRACMECH.2019.106574
Probabilistic methods for risk assessment of airframe digital twin structures
来源期刊：Engineering Fracture MechanicsDOI：10.1016/j.engfracmech.2019.106674
On the fatigue propagation of multiple cracks in friction stir weldments using linear and non-linear models under cyclic tensile loading
来源期刊：Engineering Fracture MechanicsDOI：10.1016/J.ENGFRACMECH.2018.12.015
Acoustic emission detection of damage induced by simulated environmental conditioning in carbon fiber reinforced composites
来源期刊：Engineering Fracture MechanicsDOI：10.1016/J.ENGFRACMECH.2018.04.037
New acoustic parameter characterizing loading history effects
来源期刊：Engineering Fracture MechanicsDOI：10.1016/J.ENGFRACMECH.2018.06.020
Predicting fatigue crack initiation from coupled microstructure and corrosion morphology effects
来源期刊：Engineering Fracture MechanicsDOI：10.1016/j.engfracmech.2019.106661
Mechanical stability of granite as thermal energy storage material: An experimental investigation
来源期刊：Engineering Fracture MechanicsDOI：10.1016/J.ENGFRACMECH.2019.02.008
Acoustic, electromagnetic, and neutron emissions as seismic precursors: The lunar periodicity of low-magnitude seismic swarms
来源期刊：Engineering Fracture MechanicsDOI：10.1016/J.ENGFRACMECH.2018.04.021
Analysis of plastic stress singularities of cracks and wedges under the plane stress conditions
来源期刊：Engineering Fracture MechanicsDOI：10.1016/J.ENGFRACMECH.2018.12.027
Novel analytical approach for evaluating the mechanical properties of friction stir spot joints through constitutive modeling
来源期刊：Engineering Fracture MechanicsDOI：10.1016/J.ENGFRACMECH.2019.106522
Hydromechanical modeling of unrestricted crack propagation in fractured formations using intrinsic cohesive zone model
来源期刊：Engineering Fracture MechanicsDOI：10.1016/j.engfracmech.2019.106655
Three-dimensional analytical model for effective elastic constants of transversely isotropic plates with multiple cracks: Application to stiffness reduction and steady-state cracking of composite laminates
来源期刊：Engineering Fracture MechanicsDOI：10.1016/J.ENGFRACMECH.2019.106595
A computational investigation of length-scale effects in the fracture behaviour of a graphene sheet using the atomistic J-integral
来源期刊：Engineering Fracture MechanicsDOI：10.1016/J.ENGFRACMECH.2018.12.012
Analytical characterizations of crack tip plastic zone size for central-cracked unstiffened and stiffened plates under biaxial loading
来源期刊：Engineering Fracture MechanicsDOI：10.1016/J.ENGFRACMECH.2018.11.047
Mechanical characterization of the AlSi9Cu3 cast alloy under distinct stress states and thermal conditions
来源期刊：Engineering Fracture MechanicsDOI：10.1016/J.ENGFRACMECH.2019.106499
Mode II fracture mechanics properties of solid wood measured by the tensile- and compressive-loading shear fracture tests
来源期刊：Engineering Fracture MechanicsDOI：10.1016/J.ENGFRACMECH.2019.03.046
Numerical modeling of essential work of fracture on ductile polymeric films
来源期刊：Engineering Fracture MechanicsDOI：10.1016/J.ENGFRACMECH.2019.03.034
Physically short and long-crack growth behavior of MIG welded Al-5.8%Mg alloy
来源期刊：Engineering Fracture MechanicsDOI：10.1016/J.ENGFRACMECH.2019.01.026
Interfacial crack analysis between dissimilar viscoelastic media using symplectic analytical singular element
来源期刊：Engineering Fracture MechanicsDOI：10.1016/J.ENGFRACMECH.2019.106628
The Theory of Critical Distances applied to multiscale toughening mechanisms
来源期刊：Engineering Fracture MechanicsDOI：10.1016/J.ENGFRACMECH.2019.02.012
Fracture mechanics methods for evaluating the adhesion of cold spray deposits
来源期刊：Engineering Fracture MechanicsDOI：10.1016/J.ENGFRACMECH.2018.11.009
SIF-based fracture criterion of rock-concrete interface and its application to the prediction of cracking paths in gravity dam
来源期刊：Engineering Fracture MechanicsDOI：10.1016/j.engfracmech.2019.106686
Fatigue behavior of load-carrying cruciform joints with partial penetration fillet welds under three-point bending
来源期刊：Engineering Fracture MechanicsDOI：10.1016/J.ENGFRACMECH.2019.05.015
Evaluation of fatigue life and fatigue limit of circumferentially-notched Type 304 stainless steel in air and hydrogen gas based on crack-growth property and cyclic stress-strain response
来源期刊：Engineering Fracture MechanicsDOI：10.1016/J.ENGFRACMECH.2019.05.005
A discrete crack dynamics model of toughening in brittle polycrystalline material by crack deflection
来源期刊：Engineering Fracture MechanicsDOI：10.1016/J.ENGFRACMECH.2019.03.013
Fatigue damage of designed T-type specimen under different proportion repeating Two-Step variable amplitude loads
来源期刊：Engineering Fracture MechanicsDOI：10.1016/j.engfracmech.2019.106684
Use of the stress gradient factor to estimate fatigue stress concentration factors Kf
来源期刊：Engineering Fracture MechanicsDOI：10.1016/J.ENGFRACMECH.2018.11.049
A physics based model to simulate brittle crack arrest in steel plates incorporating experimental and numerical evidences
来源期刊：Engineering Fracture MechanicsDOI：10.1016/j.engfracmech.2019.106660
Thermo-viscoelastic response of a cracked, functionally graded half-plane under a thermal shock
来源期刊：Engineering Fracture MechanicsDOI：10.1016/J.ENGFRACMECH.2018.11.042
Intermittent and multi-stage fracture stimulation to optimise fracture propagation around a single injection well for enhanced in-situ leaching applications
来源期刊：Engineering Fracture MechanicsDOI：10.1016/j.engfracmech.2019.106662
On the behaviour of non-propagating cracks in steel and aluminium castings
来源期刊：Engineering Fracture MechanicsDOI：10.1016/j.engfracmech.2019.106670
Modelling strong and weak discontinuities with the scaled boundary finite element method through enrichment
来源期刊：Engineering Fracture MechanicsDOI：10.1016/j.engfracmech.2019.106734
Determination of fracture toughness in the short transverse direction of low carbon steel pipes by compact-tension specimens completed by welded attachments
来源期刊：Engineering Fracture MechanicsDOI：10.1016/j.engfracmech.2019.106711
Measurement of the fracture energy in mode I of atmospheric ice accreted on different materials using a blister test
来源期刊：Engineering Fracture MechanicsDOI：10.1016/J.ENGFRACMECH.2019.02.003
The quantitative analysis of the crack propagation on the fatigue properties of dual-phase approximate equiaxial nanocrystalline AgCu alloy
来源期刊：Engineering Fracture MechanicsDOI：10.1016/J.ENGFRACMECH.2019.106549
Analysis on the influence of Poisson’s ratio on brittle fracture by applying uni-bond dual-parameter peridynamic model
来源期刊：Engineering Fracture MechanicsDOI：10.1016/j.engfracmech.2019.106685
General J integral solution for specimens loaded by moments, axial forces and residual stresses – A unifying stiffness formulation
来源期刊：Engineering Fracture MechanicsDOI：10.1016/J.ENGFRACMECH.2019.106500
A comparative study by using two different log-periodic power laws on acoustic emission signals from LiF specimens under compression
来源期刊：Engineering Fracture MechanicsDOI：10.1016/J.ENGFRACMECH.2018.04.022
