The aim of Bio-Medical Materials and Engineering is to promote the welfare of humans and to help them keep healthy. This international journal is an interdisciplinary journal that publishes original research papers, review articles and brief notes on materials and engineering for biological and medical systems. Articles in this peer-reviewed journal cover a wide range of topics, including, but not limited to: Engineering as applied to improving diagnosis, therapy, and prevention of disease and injury, and better substitutes for damaged or disabled human organs; Studies of biomaterial interactions with the human body, bio-compatibility, interfacial and interaction problems; Biomechanical behavior under biological and/or medical conditions; Mechanical and biological properties of membrane biomaterials; Cellular and tissue engineering, physiological, biophysical, biochemical bioengineering aspects; Implant failure fields and degradation of implants. Biomimetics engineering and materials including system analysis as supporter for aged people and as rehabilitation; Bioengineering and materials technology as applied to the decontamination against environmental problems; Biosensors, bioreactors, bioprocess instrumentation and control system; Application to food engineering; Standardization problems on biomaterials and related products; Assessment of reliability and safety of biomedical materials and man-machine systems; and Product liability of biomaterials and related products.
生物医学材料与工程的宗旨是促进人类的福利，帮助他们保持健康。这本国际期刊是一本跨学科期刊，发表生物和医学系统材料和工程方面的原创研究论文、综述文章和简要说明。该同行评审期刊中的文章涵盖广泛的主题，包括但不限于：应用于改进诊断、治疗和预防疾病和损伤的工程学，以及受损或残疾人体器官的更好替代品;生物材料与人体相互作用、生物相容性、界面和相互作用问题的研究;生物和/或医学条件下的生物力学行为;膜生物材料的力学和生物学性能;细胞和组织工程、生理学、生物物理学、生物化学生物工程方面;植入物失效场和植入物降解。仿生工程与材料，包括系统分析，作为老年人的支持和康复;生物工程和材料技术在环境问题净化中的应用生物传感器、生物反应器、生物过程仪器和控制系统;在食品工程中的应用生物材料及相关产品的标准化问题生物医学材料和人机系统的可靠性和安全性评估生物材料及相关产品的产品责任。
Development of decellularized meniscus extracellular matrix and gelatin/chitosan scaffolds for meniscus tissue engineering.
来源期刊：Bio-medical materials and engineeringDOI：10.3233/BME-191038
Preparation, physicochemical characterization and pharmacokinetics of paeoniflorin-phospholipid complex.
来源期刊：Bio-medical materials and engineeringDOI：10.3233/BME-181029
Combination of freeze-thaw with detergents: A promising approach to the decellularization of porcine carotid arteries.
来源期刊：Bio-medical materials and engineeringDOI：10.3233/BME-191044
Evaluation of the degradation, biocompatibility and osteogenesis behavior of lithium-doped calcium polyphosphate for bone tissue engineering.
来源期刊：Bio-medical materials and engineeringDOI：10.3233/BME-181030
An in-vitro evaluation of fluoride content and enamel remineralization potential of two toothpastes containing different bioactive glasses.
来源期刊：Bio-medical materials and engineeringDOI：10.3233/bme-191069
Chemical degradation of dental CAD/CAM materials.
来源期刊：Bio-medical materials and engineeringDOI：10.3233/BME-191063
Recellularization potential of small diameter vascular grafts derived from human umbilical artery.
来源期刊：Bio-medical materials and engineeringDOI：10.3233/BME-181033
Biomechanical effect with respect to the sagittal positioning of the femoral component in unicompartmental knee arthroplasty.
来源期刊：Bio-medical materials and engineeringDOI：10.3233/BME-191042
The role of osteoclasts in osteoinduction triggered by calcium phosphate biomaterials in mice.
来源期刊：Bio-medical materials and engineeringDOI：10.3233/BME-191052
Biomechanical effects of posterior tibial slope on unicompartmental knee arthroplasty using finite element analysis.
来源期刊：Bio-medical materials and engineeringDOI：10.3233/BME-191039
Component effects of bioactive glass on corrosion resistance and in vitro biological properties of apatite-matrix coatings.
来源期刊：Bio-medical materials and engineeringDOI：10.3233/BME-191045
Vulnerability analysis on the interaction between Asymmetric stent and arterial layer.
来源期刊：Bio-medical materials and engineeringDOI：10.3233/BME-191054
Frequency and chaotic analysis of pulsatile motion of blood vessel wall related to aneurysm.
来源期刊：Bio-medical materials and engineeringDOI：10.3233/BME-191048
Non-local heat conduction approach in a bi-layer tissue during magnetic fluid hyperthermia with dual phase lag model.
来源期刊：Bio-medical materials and engineeringDOI：10.3233/BME-191061
Evaluation of in vitro bioactivity and in vitro biocompatibility of Polycaprolactone/Hyaluronic acid/Multiwalled Carbon Nanotubes/Extract from Mimosa tenuiflora composites.
来源期刊：Bio-medical materials and engineeringDOI：10.3233/BME-181036
Hemocompatibility assay of a micro-catheter using hydrophilic coating biomaterials.
来源期刊：Bio-medical materials and engineeringDOI：10.3233/BME-181028
Ultrasound elastographic assessment of the stiffness of the anteromedial knee joint capsule at varying knee angles.
来源期刊：Bio-medical materials and engineeringDOI：10.3233/BME-191046
Three-dimensional modeling of Marfan syndrome with elastic and hyperelastic materials assumptions using fluid-structure interaction.
来源期刊：Bio-medical materials and engineeringDOI：10.3233/BME-191049
Bisphosphosphonate-calcium phosphate cement composite and its properties.
来源期刊：Bio-medical materials and engineeringDOI：10.3233/BME-191055
A novel diagnostic system for Doppler ultrasound of the peripheral arteries to detect the presence of thoracic aortic aneurysm.
来源期刊：Bio-medical materials and engineeringDOI：10.3233/BME-191047
Effect of ageing and endodontic treatment on the thermal stability of human dentin.
来源期刊：Bio-medical materials and engineeringDOI：10.3233/BME-191040
Efficacy of HYADD®4-G single intra-discal injections in a rabbit model of intervertebral disc degeneration.
来源期刊：Bio-medical materials and engineeringDOI：10.3233/BME-191062
Effect of stenosis on hemodynamics in left coronary artery based on patient-specific CT scan.
来源期刊：Bio-medical materials and engineeringDOI：10.3233/BME-191067
Polyamidoamine dendrimer-PEG hydrogel and its mechanical property on differentiation of mesenchymal stem cells.
来源期刊：Bio-medical materials and engineeringDOI：10.3233/BME-181037
A handheld neural stimulation controller for avian navigation guided by remote control.
来源期刊：Bio-medical materials and engineeringDOI：10.3233/bme-191070
Biomechanical analysis of a changed posterior condylar offset under deep knee bend loading in cruciate-retaining total knee arthroplasty.
来源期刊：Bio-medical materials and engineeringDOI：10.3233/BME-191041
Real-time-monitoring of pharmaceutical properties of medical tablets during direct tableting process by hybrid-tableting-process parameter-time profiles.
来源期刊：Bio-medical materials and engineeringDOI：10.3233/bme-191071
Multiple platelet-rich plasma preparations can solubilize freeze-dried chitosan formulations to form injectable implants for orthopedic indications.
来源期刊：Bio-medical materials and engineeringDOI：10.3233/BME-191058
Breakage of metal hip arthroplasty components: Retrieval and structural analysis.
来源期刊：Bio-medical materials and engineeringDOI：10.3233/BME-191053
Non-thermal plasma treatment to enhance the adhesion between enamel surface and orthodontic bracket.
来源期刊：Bio-medical materials and engineeringDOI：10.3233/BME-191065
Automated brain tumor segmentation from multi-slices FLAIR MRI images.
来源期刊：Bio-medical materials and engineeringDOI：10.3233/BME-191066
Effect of sodium hypochlorite and chlorhexidine irrigating solutions and their inactivating agents on the push-out bond strength of mineral trioxide aggregate.
来源期刊：Bio-medical materials and engineeringDOI：10.3233/BME-191051
Comparison of blood velocity between Transcranial Doppler and numerical method in the patient-specific Circle of Willis with aneurysm.
来源期刊：Bio-medical materials and engineeringDOI：10.3233/bme-191064
Investigation of gait cycle deviation over surface irregularities utilizing muscle activities.
来源期刊：Bio-medical materials and engineeringDOI：10.3233/BME-191050
Efficacy of electrical polarization on a rat femoral bone defect model with a custom-made external fixator.
来源期刊：Bio-medical materials and engineeringDOI：10.3233/bme-191068
The topography and proliferative activity of cells immunoreactive to various growth factors in rat femoral bone tissues after experimental fracture and implantation of titanium implants with bioactive biodegradable coatings.
来源期刊：Bio-medical materials and engineeringDOI：10.3233/BME-181035
Quantitative evaluation of capsular and labral resistances in the hip joint using a probing device
来源期刊：Bio-Medical Materials and EngineeringDOI：10.3233/BME-191056
Availability of ultrasound screening for asymptomatic elbow injuries in judo athletes.
来源期刊：Bio-medical materials and engineeringDOI：10.3233/BME-181032
Simultaneous quantitative analysis of indomethacin and benzoic acid in gel using ultra-violet-visible spectrophotometry and chemometrics.
来源期刊：Bio-medical materials and engineeringDOI：10.3233/BME-181034
Surface degradation study of magnesium tested in simulated body fluid.
来源期刊：Bio-medical materials and engineeringDOI：10.3233/BME-191057
A feasibility study of a multimodal stimulation bioreactor for the conditioning of stem cell seeded cardiac patches via electrical impulses and pulsatile perfusion.
来源期刊：Bio-medical materials and engineeringDOI：10.3233/BME-181031
Plate-like hydroxyapatite synthesized from dodecanedioic acid enhances chondrogenic cell proliferation.
来源期刊：Bio-medical materials and engineeringDOI：10.3233/BME-191060
In vitro investigation of human enamel wear by dental porcelain.
来源期刊：Bio-medical materials and engineeringDOI：10.3233/BME-191059
Experimental analysis of the quality of an implant embedded in the bone based on its mechanical parameters.
来源期刊：Bio-medical materials and engineeringDOI：10.3233/BME-191043
Numerical investigation of unsteady pulsatile Newtonian/non-Newtonian blood flow through curved stenosed arteries.
来源期刊：Bio-medical materials and engineeringDOI：10.3233/bme-191072
