Advanced Engineering Materials is the membership journal of three leading European Materials Societies- German Materials Society/DGM,- French Materials Society/SF2M,- Swiss Materials Federation/SVMT.
Selective Laser Melting to Manufacture “In Situ” Metal Matrix Composites: A Review
来源期刊：Advanced Engineering MaterialsDOI：10.1002/ADEM.201801244
Investigation of Lightweight and Flexible Carbon Nanofiber/Poly Dimethylsiloxane Nanocomposite Sponge for Piezoresistive Sensor Application
来源期刊：Advanced Engineering MaterialsDOI：10.1002/ADEM.201801068
Embedding Tracking Codes in Additive Manufactured Parts for Product Authentication
来源期刊：Advanced Engineering MaterialsDOI：10.1002/ADEM.201800495
Freeze‐Casting of Surface‐Magnetized Iron(II,III) Oxide Particles in a Uniform Static Magnetic Field Generated by a Helmholtz Coil
来源期刊：Advanced Engineering MaterialsDOI：10.1002/ADEM.201801092
Corrosion and wear resistance of micro-arc oxidation composite coatings on magnesium alloy AZ31 — the influence of inclusions of carbon spheres
来源期刊：Advanced Engineering MaterialsDOI：10.1002/ADEM.201900446
Solid‐Solution Effects on the High‐Temperature Oxidation Behavior of Polymer‐Derived (Hf,Ta)C/SiC and (Hf,Ti)C/SiC Ceramic Nanocomposites
来源期刊：Advanced Engineering MaterialsDOI：10.1002/ADEM.201800879
Laser‐Induced Keyhole Defect Dynamics during Metal Additive Manufacturing
来源期刊：Advanced Engineering MaterialsDOI：10.1002/ADEM.201900455
Sandwich Structures with Prismatic and Foam Cores: A Review
来源期刊：Advanced Engineering MaterialsDOI：10.1002/ADEM.201800036
Ultrafast Fabrication of Thermoelectric Films by Pulsed Light Sintering of Colloidal Nanoparticles on Flexible and Rigid Substrates
来源期刊：Advanced Engineering MaterialsDOI：10.1002/ADEM.201800800
Enhanced Passivation Layer by Cr Diffusion of 301 Stainless Steel Facilitated by SMAT
来源期刊：Advanced Engineering MaterialsDOI：10.1002/ADEM.201900125
Comparative Study of Pure Iron Manufactured by Selective Laser Melting, Laser Metal Deposition, and Casting Processes
来源期刊：Advanced Engineering MaterialsDOI：10.1002/ADEM.201900049
Compressive Properties of Bio‐Inspired Reticulated Shell Structures Processed by Selective Laser Melting
来源期刊：Advanced Engineering MaterialsDOI：10.1002/ADEM.201801168
Graphene Oxide Reinforced Iron Matrix Composite With Enhanced Biodegradation Rate Prepared by Selective Laser Melting
来源期刊：Advanced Engineering MaterialsDOI：10.1002/ADEM.201900314
Recent Advances in the Design and Fabrication of Strong and Ductile (Tensile) Titanium Metal Matrix Composites
来源期刊：Advanced Engineering MaterialsDOI：10.1002/ADEM.201801331
The inhibitive effect of artificial seawater on magnesium corrosion
来源期刊：Advanced Engineering MaterialsDOI：10.1002/ADEM.201900363
Influence of SiC/Silica and Carbon/Silica Interfaces on the High-Temperature Creep of Silicon Oxycarbide-Based Glass Ceramics A Case Study
来源期刊：Advanced Engineering MaterialsDOI：10.1002/ADEM.201800596
On the Properties of Nanoporous SiO2 Films for Single Layer Antireflection Coating
来源期刊：Advanced Engineering MaterialsDOI：10.1002/ADEM.201801229
Effect of Thermal Cycling and Aging on Heated Fiber Metal Laminates and Glass‐Fiber Epoxy Composites
来源期刊：Advanced Engineering MaterialsDOI：10.1002/ADEM.201800084
Influence of reduced graphene oxide on epoxy/carbon fibre-reinforced hybrid composite: flexural and shear properties under varying temperature conditions.
来源期刊：Advanced Engineering MaterialsDOI：10.1002/ADEM.201800614
Obfuscation of Embedded Codes in Additive Manufactured Components for Product Authentication.
来源期刊：Advanced engineering materialsDOI：10.1002/ADEM.201900146
Evolution of Twin Boundaries and Contribution to Dynamic Recrystallization and Grain Growth of Inconel 625
来源期刊：Advanced Engineering MaterialsDOI：10.1002/ADEM.201900426
Silicone elastomers with high-permittivity ionic liquids loading
来源期刊：Advanced Engineering MaterialsDOI：10.1002/ADEM.201900481
A Polarization Insensitive Wide‐Band Perfect Absorber
来源期刊：Advanced Engineering MaterialsDOI：10.1002/ADEM.201900188
Fabrication of High Aspect‐Ratio Surface Micro Patterns on Stainless Steel using High‐Speed Direct Laser Interference Patterning
来源期刊：Advanced Engineering MaterialsDOI：10.1002/ADEM.201900151
Effect of Long-Term Storage on Microstructure and Microhardness Stability in OFHC Copper Processed by High-Pressure Torsion
来源期刊：Advanced Engineering MaterialsDOI：10.1002/ADEM.201801300
Thermoresistance of p‐Type 4H–SiC Integrated MEMS Devices for High‐Temperature Sensing
来源期刊：Advanced Engineering MaterialsDOI：10.1002/ADEM.201801049
3D‐Printed Multilayered Reinforced Material System for Gas Supply in CubeSats and Small Satellites
来源期刊：Advanced Engineering MaterialsDOI：10.1002/ADEM.201900401
Exploiting Functionally Graded Elastomeric Materials to Program Collapse and Mechanical Properties
来源期刊：Advanced Engineering MaterialsDOI：10.1002/adem.201900807
Ultrashort Pulsed Laser Surface Patterning of Titanium to Improve Osseointegration of Dental Implants
来源期刊：Advanced Engineering MaterialsDOI：10.1002/adem.201900639
Thermal Stability of an Mg‐Nd Alloy Processed by High‐Pressure Torsion
来源期刊：Advanced Engineering MaterialsDOI：10.1002/adem.201900801
New Materials and Processes for Transport Applications: Going Hybrid and Beyond
来源期刊：Advanced Engineering MaterialsDOI：10.1002/ADEM.201900056
Substrate Mediated Synthesis of Ti–Si–N Nano‐and‐Micro Structures for Optoelectronic Applications
来源期刊：Advanced Engineering MaterialsDOI：10.1002/adem.201900061
Injectable, Non‐Diffusible, and Pre‐Filled Bone Paste Composed of α‐Tricalcium Phosphate and Hydrophobically Modified Poly(Vinyl Alcohol)
来源期刊：Advanced Engineering MaterialsDOI：10.1002/adem.201900660
Stiffness, energy dissipation and hyperelasticity in hierarchical multilayer composite nanocoated open cell polyurethane foams
来源期刊：Advanced Engineering MaterialsDOI：10.1002/ADEM.201900459
High Contrast Thermal Conductivity Change in Ni–Mn–In Heusler Alloys near Room Temperature
来源期刊：Advanced Engineering MaterialsDOI：10.1002/ADEM.201801342
Microstructure and Properties of Porous SiC Ceramics Modified by CVI‐SiC Nanowires
来源期刊：Advanced Engineering MaterialsDOI：10.1002/ADEM.201800653
Characterization of Hardness and Stiffness of Ceramic Matrix Composites through Instrumented Indentation Test
来源期刊：Advanced Engineering MaterialsDOI：10.1002/ADEM.201800806
Record‐Breaking Magnetoresistance at the Edge of a Microflake of Natural Graphite
来源期刊：Advanced Engineering MaterialsDOI：10.1002/adem.201900991
Programmable Aerodynamic Drag on Active Dimpled Cylinders
来源期刊：Advanced Engineering MaterialsDOI：10.1002/ADEM.201801315
Microporous drug-eluting large silk particles through cryo-granulation.
来源期刊：Advanced engineering materialsDOI：10.1002/ADEM.201801242
The Challenge of Reversing Theories to Hybridize Structures with Fiber Metal Laminate Design Concepts
来源期刊：Advanced Engineering MaterialsDOI：10.1002/ADEM.201800040
Improvement in the Electrical Properties of Nickel Plated Steel using Graphitic Carbon Coatings
来源期刊：Advanced Engineering MaterialsDOI：10.1002/ADEM.201900408
The Surface Cracking Resistance of Al2O3‐Modified SiCf/SiC‐B4C Composites after Cyclic Oxidation in Wet Environment
来源期刊：Advanced Engineering MaterialsDOI：10.1002/ADEM.201900458
Fracture Along Deformation Twin Boundary in Small‐Volume Fe40Mn40Co10Cr10 High Entropy Alloy
来源期刊：Advanced Engineering MaterialsDOI：10.1002/ADEM.201801266
Combinatorial Development and in‐vitro Characterization of the Quaternary Zr‐Ti‐X‐Y (X‐Y=Cu‐Ag/Co‐Ni) Metallic Glass for Prospective Bio‐Implants
来源期刊：Advanced Engineering MaterialsDOI：10.1002/adem.201900726
Robust Cellular Shape‐Memory Ceramics via Gradient‐Controlled Freeze Casting
来源期刊：Advanced Engineering MaterialsDOI：10.1002/adem.201900398
