The International Journal of Metalcasting is dedicated to leading the transfer of research and technology for the global metalcasting industry. The quarterly publication keeps the latest developments in metalcasting research and technology in front of the scientific leaders in our global industry throughout the year. All papers published in the the journal are approved after a rigorous peer review process. The editorial peer review board represents three international metalcasting groups: academia (metalcasting professors), science and research (personnel from national labs, research and scientific institutions), and industry (leading technical personnel from metalcasting facilities).
《国际金属铸造杂志》致力于引领全球金属铸造行业的研究和技术转移。该季刊全年向全球行业的科学领袖展示金属铸造研究和技术的最新发展。所有发表在该杂志上的论文都经过严格的同行评审程序。编辑同行评审委员会代表三个国际金属铸造集团：学术界（金属铸造教授）、科学和研究（国家实验室、研究和科学机构的人员）以及工业界（金属铸造设施的主要技术人员）。
Effect of TiB2 on the Corrosion Resistance Behavior of In Situ Al Composites
来源期刊：International Journal of MetalcastingDOI：10.1007/s40962-019-00330-3
Composite Casting and Characterization of Cu–Al Bilayer Compounds
来源期刊：International Journal of MetalcastingDOI：10.1007/s40962-019-00344-x
Effect of Yttrium on Hot Tearing Susceptibility of Mg–6Zn–1Cu–0.6Zr Alloys
来源期刊：International Journal of MetalcastingDOI：10.1007/s40962-019-00352-x
Study on the Strength of Short Carbon Fiber-Reinforced Silicon Sol Shells for the Investment Casting Process
来源期刊：International Journal of MetalcastingDOI：10.1007/s40962-019-00362-9
Effect of Rare Earth Metals on the Mechanical Properties and Fractography of Al–Si-Based Alloys
来源期刊：International Journal of MetalcastingDOI：10.1007/s40962-019-00336-x
Solidification Rate and the Partial Modification of 319 Aluminum Alloy with Strontium
来源期刊：International Journal of MetalcastingDOI：10.1007/s40962-019-00329-w
Ultrasonication Effects on the Microstructure Characteristics of the A380 Die Cast Alloy
来源期刊：International Journal of MetalcastingDOI：10.1007/s40962-018-00296-8
Effect of the Addition of La and Ce on the Solidification Behavior of Al–Cu and Al–Si–Cu Cast Alloys
来源期刊：International Journal of MetalcastingDOI：10.1007/s40962-019-00351-y
A New Insight to Dynamic Oxidation of Molten Metals by the Parametric Study of Oxide/Metal/Oxide Sandwich Formation
来源期刊：International Journal of MetalcastingDOI：10.1007/s40962-019-00395-0
Role of Sr in Microstructure, Hardness and Biodegradable Behavior of Cast Mg–2Zn–2Ca–0.5Mn (ZXM220) Alloy for Potential Implant Application
来源期刊：International Journal of MetalcastingDOI：10.1007/s40962-019-00366-5
Biocorrosion and Mechanical Properties of ZXM100 and ZXM120 Magnesium Alloys
来源期刊：International Journal of MetalcastingDOI：10.1007/s40962-019-00308-1
Influence of Die Temperature Control on Solidification and the Casting Process
来源期刊：International Journal of MetalcastingDOI：10.1007/s40962-019-00391-4
Graphite Degeneration in High Si, Mg-Treated Iron Castings: Sulfur and Oxygen Addition Effects
来源期刊：International Journal of MetalcastingDOI：10.1007/s40962-019-00385-2
Effect of Scandium on Cast Iron Microstructure
来源期刊：International Journal of MetalcastingDOI：10.1007/s40962-019-00382-5
Micro-CT Quantitative Evaluation of Graphite Nodules in SGI
来源期刊：International Journal of MetalcastingDOI：10.1007/s40962-019-00354-9
50 Years of Foundry-Produced Metal Matrix Composites and Future Opportunities
来源期刊：International Journal of MetalcastingDOI：10.1007/s40962-019-00375-4
Permafrost Analysis Methodology (PAM) for Ceramic Shell Deformation in the Firing Process
来源期刊：International Journal of MetalcastingDOI：10.1007/s40962-019-00317-0
Effect of Austenite Reformation on Localized Corrosion Resistance of Hyper-Duplex Stainless Steel in Hot Chloride Solution
来源期刊：International Journal of MetalcastingDOI：10.1007/s40962-019-00348-7
Parametric Investigation of Squeeze Casting Process on the Microstructure Characteristics and Mechanical Properties of A390 Aluminum Alloy
来源期刊：International Journal of MetalcastingDOI：10.1007/s40962-019-00325-0
Optimization of Centrifugal Casting Parameters to Produce the Functionally Graded Al–15wt%Mg2Si Composites with Higher Tensile Properties
来源期刊：International Journal of MetalcastingDOI：10.1007/s40962-019-00394-1
From The Editor
来源期刊：International Journal of MetalcastingDOI：10.1007/s40962-019-00324-1
Effect of Vibration on Interdendritic Feeding of AL–5%CU–0.4%MN Alloy
来源期刊：International Journal of MetalcastingDOI：10.1007/s40962-019-00319-y
Development and Characterization of In Situ AlSi5Cu3/TiB2 Composites
来源期刊：International Journal of MetalcastingDOI：10.1007/s40962-019-00328-x
Microstructural Characteristics, Mechanical Properties, Fracture Analysis and Corrosion Behavior of Hypereutectic Al–13.5Si Alloy
来源期刊：International Journal of MetalcastingDOI：10.1007/s40962-019-00315-2
New Methods of Obtaining Al–Si Alloys Using Amorphous Microsilica
来源期刊：International Journal of MetalcastingDOI：10.1007/s40962-019-00353-w
Growth of Spheroidal Graphite: Light Versus Scanning and Transmission Electron Microscopies
来源期刊：International Journal of MetalcastingDOI：10.1007/s40962-019-00388-z
Additively Manufactured Single-Use Molds and Reusable Patterns for Large Automotive and Hydroelectric Components
来源期刊：International Journal of MetalcastingDOI：10.1007/s40962-019-00379-0
Technology of Alloy Layers on Surface of Castings
来源期刊：International Journal of MetalcastingDOI：10.1007/s40962-018-00304-x
The Meritocratic Ascendance of Cast Iron: from Magic to Virtual Cast Iron
来源期刊：International Journal of MetalcastingDOI：10.1007/s40962-019-00347-8
Influence of TiN Additions on the Microstructure of a Lightweight Fe–Mn–Al Steel
来源期刊：International Journal of MetalcastingDOI：10.1007/s40962-019-00373-6
Fracture Micromechanisms Evaluation of High-Strength Cast Irons Under Thermomechanical Fatigue Conditions
来源期刊：International Journal of MetalcastingDOI：10.1007/s40962-019-00399-w
Cupola Furnace Slag: Its Origin, Properties and Utilization
来源期刊：International Journal of MetalcastingDOI：10.1007/s40962-019-00314-3
Study on Reduction in Shrinkage Defects in HPDC Component by Optimization of Localized Squeezing Process
来源期刊：International Journal of MetalcastingDOI：10.1007/s40962-018-00295-9
Degating of AlSi10Cu2Fe High-Pressure Die Casting Component Using Resonance Vibration Technique
来源期刊：International Journal of MetalcastingDOI：10.1007/s40962-019-00341-0
Microstructural Analysis of X38CrMov5-1 Steel Parts Manufactured by Casting and Evaluation of Possible Cleavage Failure
来源期刊：International Journal of MetalcastingDOI：10.1007/s40962-019-00356-7
Cooling Behavior of A356 Alloy in Surfactant Quenching Medium
来源期刊：International Journal of MetalcastingDOI：10.1007/s40962-019-00386-1
Investigation on the Microstructure and Mechanical Properties of Arc-Spray-Coated Q235/AZ91D by Solid–Liquid Compound Casting
来源期刊：International Journal of MetalcastingDOI：10.1007/s40962-019-00380-7
AFS/FEF Student Technology Contest
来源期刊：International Journal of MetalcastingDOI：10.1007/s40962-019-00376-3
Feasibility of US Foundry Supply Chain Consumables for Three-Dimensional Sand Printing
来源期刊：International Journal of MetalcastingDOI：10.1007/s40962-018-00299-5
AFS/FEF Student Technology Contest
来源期刊：International Journal of MetalcastingDOI：10.1007/s40962-019-00370-9
Control of Edge Plate Stray Grain of Single-Crystal Turbine Blade by Using Process Bar Method
来源期刊：International Journal of MetalcastingDOI：10.1007/s40962-019-00338-9
Ductile Iron Front-End Ultrasonic Nodularity Determination Using Standard Coupons
来源期刊：International Journal of MetalcastingDOI：10.1007/s40962-019-00322-3
Evaluating the Risk of Corona Discharge in Superalloy Vacuum Induction Melting Furnace Applications
来源期刊：International Journal of MetalcastingDOI：10.1007/s40962-019-00392-3
Metalcasting Industry Research
来源期刊：International Journal of MetalcastingDOI：10.1007/s40962-019-00345-w
Examination of the Size and Morphology of Austenite Grains in Lamellar Graphite Cast Iron
来源期刊：International Journal of MetalcastingDOI：10.1007/s40962-019-00393-2
Analysis of the Carbon Content Effect on the Microstructure and Thermal Behavior of Cobalt-Matrix Dental Alloy
来源期刊：International Journal of MetalcastingDOI：10.1007/s40962-019-00381-6
Effect of Transition Metals Addition on the Microstructure and Incipient Melting of 354-Based Alloys
来源期刊：International Journal of MetalcastingDOI：10.1007/s40962-019-00331-2
Evaluation of Physical, Performance and Emission Characteristics of Green Sand
来源期刊：International Journal of MetalcastingDOI：10.1007/s40962-019-00318-z
From the Editor
来源期刊：International Journal of MetalcastingDOI：10.1007/s40962-019-00346-9
Correction to: Ductile Iron Front-End Ultrasonic Nodularity Determination Using Standard Coupons
来源期刊：International Journal of MetalcastingDOI：10.1007/s40962-019-00334-z
