The International Journal of Materials Research (IJMR) publishes original high quality experimental and theoretical papers and reviews on basic and applied research in the field of materials science and engineering, with focus on synthesis, processing, constitution, and properties of all classes of materials. Particular emphasis is placed on microstructural design, phase relations, computational thermodynamics, and kinetics at the nano to macro scale. Contributions may also focus on progress in advanced characterization techniques. All articles are subject to thorough, independent peer review.
《国际材料研究杂志》（IJMR）发表原创的高质量实验和理论论文以及材料科学和工程领域的基础和应用研究综述，重点关注各类材料的合成、加工、组成和性质。特别强调微观结构设计、相关系、计算热力学和纳米到宏观尺度的动力学。贡献也可能集中在先进表征技术的进展。所有文章均经过全面、独立的同行评审。
Thermodynamic re-assessment of the binary Cr–Ta system down to 0 K
来源期刊：International Journal of Materials ResearchDOI：10.3139/146.111812
Thermodynamic investigations in the Al–Fe system: Thermodynamic modeling using CALPHAD
来源期刊：International Journal of Materials ResearchDOI：10.3139/146.111765
Evolution of γ′ morphology and γ/γ′ lattice parameter misfit in a nickel-based superalloy during non-equilibrium cooling
来源期刊：International Journal of Materials ResearchDOI：10.3139/146.111729
Mechanical and morphological properties of bamboo mesoparticle/nylon 6 composites
来源期刊：International Journal of Materials ResearchDOI：10.3139/146.111725
Thermodynamic analysis of precipitation behavior of M23C6 carbide in Nimonic 105 superalloy
来源期刊：International Journal of Materials ResearchDOI：10.3139/146.111813
Strengthening and toughening of laminated TiAl composite sheets by titanium alloy layers and carbide particles
来源期刊：International Journal of Materials ResearchDOI：10.3139/146.111795
Microstructure and properties of laser interference crystallized amorphous FeSiB ribbon
来源期刊：International Journal of Materials ResearchDOI：10.3139/146.111684
The structure and formation mechanism of FeS2/Fe3S4/S8 nanocomposite synthesized using spherical shaped Fe3O4 nanoparticles as the precursor
来源期刊：International Journal of Materials ResearchDOI：10.3139/146.111670
Replacing martensite with nanobainite in moderately alloyed carburised steel for better wear performance
来源期刊：International Journal of Materials ResearchDOI：10.3139/146.111726
Effect of current density and deposition time on the corrosion and wear resistance of Ni–W alloy coatings
来源期刊：International Journal of Materials ResearchDOI：10.3139/146.111844
Synthesis of La2(Zr0.7Ce0.3)2O7 nanopowder using a simple chemical precipitation method and heat treatment at high temperature
来源期刊：International Journal of Materials ResearchDOI：10.3139/146.111793
The softening factor cb of commercial titanium alloy wires
来源期刊：International Journal of Materials ResearchDOI：10.3139/146.111834
Finite element simulation of the residual stress in Ti6Al4V titanium alloy laser welded joint
来源期刊：International Journal of Materials ResearchDOI：10.3139/146.111757
Thermodynamic properties of cerium molybdate
来源期刊：International Journal of Materials ResearchDOI：10.3139/146.111794
Increasing cold workability of Ti-6Al-4V alloy via thermo-mechanical processing: simulation and experiment
来源期刊：International Journal of Materials ResearchDOI：10.3139/146.111767
Structure of MgLiAl alloys after various routes of severe plastic deformation studied by TEM
来源期刊：International Journal of Materials ResearchDOI：10.3139/146.111680
In-situ synchrotron investigation of the phases- and their morphology-development in Mg–Nd–Zn alloys
来源期刊：International Journal of Materials ResearchDOI：10.3139/146.111786
Atomistic study of fracture behavior of metallic glass fiber reinforced metal-matrix nanocomposite during bending creep deformation process
来源期刊：International Journal of Materials ResearchDOI：10.3139/146.111841
Hot deformation behaviour of and processing map for an Ni-based austenitic stainless steel
来源期刊：International Journal of Materials ResearchDOI：10.3139/146.111733
Effects of minor La and Ce additions on microstructure and mechanical properties of A201 alloy
来源期刊：International Journal of Materials ResearchDOI：10.3139/146.111791
Effect of nanostructured Al on microstructure, microhardness and sliding wear behavior of Al–xGnP composites by powder metallurgy (PM) route
来源期刊：International Journal of Materials ResearchDOI：10.3139/146.111826
Investigation of the 3D hydrogen distribution in zirconium alloys by means of neutron tomography
来源期刊：International Journal of Materials ResearchDOI：10.3139/146.111863
Mechanism of the effect of electron beam melting on the distribution of oxygen, nitrogen and carbon in silicon
来源期刊：International Journal of Materials ResearchDOI：10.3139/146.111736
A new approach to reduce springback in sheet metal bending using digital image correlation
来源期刊：International Journal of Materials ResearchDOI：10.3139/146.111799
Investigation of MWCNTs addition on mechanical properties of cordierite glass-ceramic composites
来源期刊：International Journal of Materials ResearchDOI：10.3139/146.111732
Deposition temperature dependence on the bonding structure and mechanical properties of laser ablated boron-carbonitride thin films
来源期刊：International Journal of Materials ResearchDOI：10.3139/146.111848
Effects of temperature field and SiC nanoparticles on microstructure and mechanical properties of n-SiCp/Mg-9 %Al composites fabricated by ultrasonication-assisted semi-solid hot pressing of powder
来源期刊：International Journal of Materials ResearchDOI：10.3139/146.111743
Numerical simulation and global heat transfer computations of thermoelastic stress in Cz silicon crystal
来源期刊：International Journal of Materials ResearchDOI：10.3139/146.111824
Surface mechanical attrition treatment of commercially pure titanium by electromagnetic vibration
来源期刊：International Journal of Materials ResearchDOI：10.3139/146.111818
Development and characterization of eutectic Sn-Zn, Sn-Ag, Sn-Bi and Sn-Cu solder alloys
来源期刊：International Journal of Materials ResearchDOI：10.3139/146.111851
Texture evolution of magnesium alloy AZ31 during high temperature tensile deformation
来源期刊：International Journal of Materials ResearchDOI：10.3139/146.111807
Relationship between the variation in transformation temperatures, resistivity and dislocation density during thermal cycling of Ni50Ti50 shape memory alloy
来源期刊：International Journal of Materials ResearchDOI：10.3139/146.111755
Investigation of semi-solid microstructures of an A356 alloy containing rare-earth Gd during isothermal heat treatment
来源期刊：International Journal of Materials ResearchDOI：10.3139/146.111760
Effect of in-situ formation of AlP on solidification of hypereutectic Al–Si alloy
来源期刊：International Journal of Materials ResearchDOI：10.3139/146.111831
High-temperature oxidation behavior of low sulfur martensitic stainless steel 1Cr13Mo containing cerium
来源期刊：International Journal of Materials ResearchDOI：10.3139/146.111788
Wear and corrosion of in-situ formed Al3Zr aluminide reinforced Al3003 surface composite
来源期刊：International Journal of Materials ResearchDOI：10.3139/146.111819
Effect of Cr and Ni on the microstructural evolution in Co–Re–Cr–Ni alloys
来源期刊：International Journal of Materials ResearchDOI：10.3139/146.111855
Design, microstructural characterization and heat treatment of novel Cu0.5FeNiVAlx high-entropy alloys
来源期刊：International Journal of Materials ResearchDOI：10.3139/146.111741
Effect of thermomechanical treatment on the microstructures and mechanical properties of an ultrafine grained steel using bainite starting microstructure
来源期刊：International Journal of Materials ResearchDOI：10.3139/146.111771
Microstructure and texture contributing to damage resistance of the anosteocytic hinge-bone in the cleithrum of Esox lucius
来源期刊：International Journal of Materials ResearchDOI：10.3139/146.111801
Effects of TiN coating on the high-cycle-fatigue and very-high-cycle-fatigue properties of Ti-6Al-4V alloy
来源期刊：International Journal of Materials ResearchDOI：10.3139/146.111754
The influence of Mo/B atomic ratio on microstructural evolution and mechanical properties of Mo2FeB2-based cermets
来源期刊：International Journal of Materials ResearchDOI：10.3139/146.111778
Observation of side arm splitting studied by high resolution X-ray radiography
来源期刊：International Journal of Materials ResearchDOI：10.3139/146.111835
Dendritic structure formation of magnesium alloys for the manipulation of corrosion properties: Part 2 – corrosion
来源期刊：International Journal of Materials ResearchDOI：10.3139/146.111790
Microstructure, hardness and wear behaviour of NbC reinforced AA7075 matrix composites fabricated by friction stir processing
来源期刊：International Journal of Materials ResearchDOI：10.3139/146.111724
Investigation of the microstructure and mechanical properties of NbB2 particle reinforced aluminum matrix composites
来源期刊：International Journal of Materials ResearchDOI：10.3139/146.111745
On the material characteristics of a high carbon cast austenitic stainless steel after solution annealing followed by quenching in a CNT nanofluid
来源期刊：International Journal of Materials ResearchDOI：10.3139/146.111773
Complex-shaped high speed steel with high mechanical performance fabricated by gelcasting sintering
来源期刊：International Journal of Materials ResearchDOI：10.3139/146.111836
Self-assembly of Pd@Au core/shell nanosheets used as a highly sensitive SERS substrate based on the determination of trace fluorescent dye
来源期刊：International Journal of Materials ResearchDOI：10.3139/146.111768
The effect of thermomechanical treatment on the microstructure and mechanical properties of high Mn–Cr austenitic steels
来源期刊：International Journal of Materials ResearchDOI：10.3139/146.111827
