The International Journal of Fracture is an outlet for original analytical, numerical and experimental contributions which provide improved understanding of the mechanisms of micro and macro fracture in all materials, and their engineering implications.The Journal is pleased to receive papers from engineers and scientists working in various aspects of fracture. Contributions emphasizing empirical correlations, unanalyzed experimental results or routine numerical computations, while representing important necessary aspects of certain fatigue, strength, and fracture analyses, will normally be discouraged; occasional review papers in these as well as other areas are welcomed. Innovative and in-depth engineering applications of fracture theory are also encouraged.In addition, the Journal welcomes, for rapid publication, Brief Notes in Fracture and Micromechanics which serve the Journal's Objective. Brief Notes include: Brief presentation of a new idea, concept or method; new experimental observations or methods of significance; short notes of quality that do not amount to full length papers; discussion of previously published work in the Journal, and Brief Notes Errata.
《国际断裂杂志》是一个原创的分析、数值和实验论文的出口，它提供了对所有材料微观和宏观断裂机制及其工程意义的更好理解。该杂志很高兴收到来自断裂各方面工作的工程师和科学家的论文。强调经验相关性、未分析的实验结果或常规数值计算的贡献，虽然代表了某些疲劳、强度和断裂分析的重要必要方面，但通常是不鼓励的;欢迎在这些领域以及其他领域不定期提交审查文件。此外，本杂志还欢迎《断裂与微观力学简讯》的快速出版，这也是本杂志的宗旨。简要说明包括：简要介绍新的想法、概念或方法;新的实验观察结果或有意义的方法;质量不等于完整长度的论文的短笔记;讨论以前在期刊上发表的工作，并简要说明勘误表。
The third Sandia fracture challenge: predictions of ductile fracture in additively manufactured metal
来源期刊：International Journal of FractureDOI：10.1007/s10704-019-00361-1
A micromechanical analysis of inter-fiber failure in long reinforced composites based on the phase field approach of fracture combined with the cohesive zone model
来源期刊：International Journal of FractureDOI：10.1007/s10704-019-00384-8
Simulation of uniaxial tensile behavior of quasi-brittle materials using softening contact models in DEM
来源期刊：International Journal of FractureDOI：10.1007/s10704-019-00373-x
Circumventing mesh bias by r- and h-adaptive techniques for variational eigenfracture
来源期刊：International Journal of FractureDOI：10.1007/s10704-019-00349-x
Fractional calculus derivation of a rate-dependent PPR-based cohesive fracture model: theory, implementation, and numerical results
来源期刊：International Journal of FractureDOI：10.1007/s10704-018-00334-w
The J-contour integral in peridynamics via displacements
来源期刊：International Journal of FractureDOI：10.1007/s10704-019-00351-3
Effect of high-rate dynamic comminution on penetration of projectiles of various velocities and impact angles into concrete
来源期刊：International Journal of FractureDOI：10.1007/s10704-019-00354-0
Hydraulic fracture geometry in ultrasoft polymer networks
来源期刊：International Journal of FractureDOI：10.1007/s10704-019-00380-y
Effect of thermomechanical coupling on stress-induced martensitic transformation around the crack tip of edge cracked shape memory alloy
来源期刊：International Journal of FractureDOI：10.1007/s10704-019-00346-0
A phase field approach for damage propagation in periodic microstructured materials
来源期刊：International Journal of FractureDOI：10.1007/s10704-019-00400-x
Coupled phase field finite element model for crack propagation in elastic polycrystalline microstructures
来源期刊：International Journal of FractureDOI：10.1007/s10704-019-00378-6
Variational h-adaption method for the phase field approach to fracture
来源期刊：International Journal of FractureDOI：10.1007/s10704-019-00372-y
Rate effect in inclined fibre pull-out for smooth and hooked-end fibres: a numerical study
来源期刊：International Journal of FractureDOI：10.1007/s10704-019-00404-7
A new dynamic fracturing method: deflagration fracturing technology with carbon dioxide
来源期刊：International Journal of FractureDOI：10.1007/s10704-019-00403-8
The third Sandia Fracture Challenge: from theory to practice in a classroom setting
来源期刊：International Journal of FractureDOI：10.1007/s10704-019-00366-w
Evolution of damage and failure in an additively manufactured 316L SS structure: experimental reinvestigation of the third Sandia fracture challenge
来源期刊：International Journal of FractureDOI：10.1007/s10704-019-00357-x
Effect of the displacement rate and inclination angle in steel fiber pullout tests
来源期刊：International Journal of FractureDOI：10.1007/s10704-019-00398-2
Multi-directional composite laminates: fatigue delamination propagation in mode I—a comparison
来源期刊：International Journal of FractureDOI：10.1007/s10704-019-00388-4
Feasibility study on Hartman–Schijve data analysis for mode II fatigue fracture of adhesively bonded wood joints
来源期刊：International Journal of FractureDOI：10.1007/s10704-019-00414-5
Elastic–plastic analysis of the peel test for ductile thin film presenting a saturation of the yield stress
来源期刊：International Journal of FractureDOI：10.1007/s10704-019-00393-7
The third Sandia Fracture Challenge: deterministic and probabilistic modeling of ductile fracture of additively-manufactured material
来源期刊：International Journal of FractureDOI：10.1007/s10704-019-00355-z
A fast algorithm to simulate the failure of a periodic elastic fibre composite
来源期刊：International Journal of FractureDOI：10.1007/s10704-019-00374-w
Multiscale crystal-plasticity phase field and extended finite element methods for fatigue crack initiation and propagation modeling
来源期刊：International Journal of FractureDOI：10.1007/s10704-018-00339-5
In-situ microscopy testing of plasticity variation ahead of fatigue crack tip in AL2024-T3
来源期刊：International Journal of FractureDOI：10.1007/s10704-018-00340-y
Effect of polypropylene fibers on the fracture behavior of heated ultra-high performance concrete
来源期刊：International Journal of FractureDOI：10.1007/s10704-019-00407-4
A stress triaxiality based modified Liu–Murakami creep damage model for creep crack growth life prediction in different specimens
来源期刊：International Journal of FractureDOI：10.1007/s10704-019-00412-7
Phase-field fracture simulations of the Brazilian splitting test
来源期刊：International Journal of FractureDOI：10.1007/s10704-019-00401-w
A fracture model for exfoliation of thin silicon films
来源期刊：International Journal of FractureDOI：10.1007/s10704-019-00350-4
Shear–compression loaded interface crack between a rigid substrate and an FGM layer—frictional crack closure effects
来源期刊：International Journal of FractureDOI：10.1007/s10704-019-00348-y
Fatigue crack growth behaviour in Ti6Al4V alloy specimens produced by selective laser melting
来源期刊：International Journal of FractureDOI：10.1007/s10704-019-00417-2
On the evaluation of energy release rate and mode mixity for ductile asymmetric four point bend specimens
来源期刊：International Journal of FractureDOI：10.1007/s10704-019-00369-7
Numerical study of fatigue crack growth considering an elastic–plastic layer in mixed-mode loading
来源期刊：International Journal of FractureDOI：10.1007/s10704-019-00402-9
Study on transition from dwell/interface defeat to penetration of long-rod projectile impacting silicon carbide
来源期刊：International Journal of FractureDOI：10.1007/s10704-019-00379-5
A super-convergent staggered algorithm for the simulation of hydraulic fracturing treatments
来源期刊：International Journal of FractureDOI：10.1007/s10704-019-00362-0
Theoretical approach to determine dynamic fatigue strength characteristics of ceramics under variable loading rates on the basis of SCG concept
来源期刊：International Journal of FractureDOI：10.1007/s10704-018-00337-7
The effect of residual stress on a centre-cracked plate under uniaxial loading
来源期刊：International Journal of FractureDOI：10.1007/s10704-019-00382-w
Characterization of hydraulic fracture geometry in shale rocks through physical modeling
来源期刊：International Journal of FractureDOI：10.1007/s10704-019-00343-3
Preface to the Special Issue: Computational approaches for the modeling of complex crack path and patterns
来源期刊：International Journal of FractureDOI：10.1007/s10704-019-00408-3
On the formation of expanding crack tip precipitates
来源期刊：International Journal of FractureDOI：10.1007/s10704-019-00360-2
A framework for material calibration and deformation predictions applied to additive manufacturing of metals
来源期刊：International Journal of FractureDOI：10.1007/s10704-019-00375-9
Correction to: Multi-scale model of effects of roughness on the cohesive strength of self-assembled monolayers
来源期刊：International Journal of FractureDOI：10.1007/s10704-019-00352-2
Compressive and tensile strength of steel fibrous reinforced concrete under explosive loading
来源期刊：International Journal of FractureDOI：10.1007/s10704-018-00342-w
Predicting the reliability of an additively-manufactured metal part for the third Sandia fracture challenge by accounting for random material defects
来源期刊：International Journal of FractureDOI：10.1007/s10704-019-00368-8
Application of uncertainty quantification techniques to ductile damage predictions in the third Sandia Fracture Challenge
来源期刊：International Journal of FractureDOI：10.1007/s10704-019-00364-y
An integrated two-dimensional modeling method for predicting ductility of thin-walled die cast magnesium
来源期刊：International Journal of FractureDOI：10.1007/s10704-019-00390-w
Towards objective simulation of quasi-static failure using a bounded rate local model with damage
来源期刊：International Journal of FractureDOI：10.1007/s10704-019-00358-w
Analysis of self-similar rate-dependent interfacial crack propagation in mode II
来源期刊：International Journal of FractureDOI：10.1007/s10704-019-00396-4
Switching induced heating at the crack tip in ferroelectric ceramics
来源期刊：International Journal of FractureDOI：10.1007/s10704-019-00415-4
A Coulomb-based model to simulate concrete cracking using cohesive elements
来源期刊：International Journal of FractureDOI：10.1007/s10704-019-00395-5
Direct extraction of stochastic stress intensity factors using generalized polynomial chaos
来源期刊：International Journal of FractureDOI：10.1007/s10704-019-00385-7
