All differential equation based models for biomedical applications and their novel solutions (using either established numerical methods such as finite difference, finite element and finite volume methods or new numerical methods) are within the scope of this journal. Manuscripts with experimental and analytical themes are also welcome if a component of the paper deals with numerical methods. Special cases that may not involve differential equations such as image processing, meshing and artificial intelligence are within the scope. Any research that is broadly linked to the wellbeing of the human body, either directly or indirectly, is also within the scope of this journal.
生物医学应用中所有基于微分方程的模型及其新颖的解决方案（使用已建立的数值方法，如有限差分、有限元和有限体积法或新的数值方法）均在本期刊的范围内。如果论文的一个组成部分涉及数值方法，也欢迎以实验和分析为主题的手稿。可能不涉及微分方程的特殊情况，如图像处理、网格划分和人工智能都在范围之内。任何与人体健康有广泛联系的研究，无论是直接还是间接，也在本杂志的范围内。
A rule-based method to model myocardial fiber orientation in cardiac biventricular geometries with outflow tracts
来源期刊：International journal for numerical methods in biomedical engineeringDOI：10.1002/cnm.3185
Computational aeroacoustics to identify sound sources in the generation of sibilant /s/.
来源期刊：International journal for numerical methods in biomedical engineeringDOI：10.1002/cnm.3153
Uncertainty in cardiac myofiber orientation and stiffnesses dominate the variability of left ventricle deformation response
来源期刊：International Journal for Numerical Methods in Biomedical EngineeringDOI：10.1002/cnm.3178
Bone fracture healing under Ilizarov fixator: Influence of fixator configuration, fracture geometry, and loading.
来源期刊：International journal for numerical methods in biomedical engineeringDOI：10.1002/cnm.3199
Sensitivity analysis and uncertainty quantification of 1D models of pulmonary hemodynamics in mice under control and hypertensive conditions.
来源期刊：International journal for numerical methods in biomedical engineeringDOI：10.1002/cnm.3242
Subject-specific loads on the lumbar spine in detailed finite element models scaled geometrically and kinematic-driven by radiography images.
来源期刊：International journal for numerical methods in biomedical engineeringDOI：10.1002/cnm.3182
Finite element modeling of near-wall mass transport in cardiovascular flows.
来源期刊：International journal for numerical methods in biomedical engineeringDOI：10.1002/cnm.3148
Transapical mitral valve repair with neochordae implantation: FSI analysis of neochordae number and complexity of leaflet prolapse.
来源期刊：International journal for numerical methods in biomedical engineeringDOI：10.1002/cnm.3297
A semi‐active human digital twin model for detecting severity of carotid stenoses from head vibration—A coupled computational mechanics and computer vision method
来源期刊：International Journal for Numerical Methods in Biomedical EngineeringDOI：10.1002/cnm.3180
A computational model of open-irrigated radiofrequency catheter ablation accounting for mechanical properties of the cardiac tissue.
来源期刊：International journal for numerical methods in biomedical engineeringDOI：10.1002/cnm.3232
Analysis of thyroid thermographic images for detection of thyroid tumor: An experimental-numerical study.
来源期刊：International journal for numerical methods in biomedical engineeringDOI：10.1002/cnm.3192
A porous fibrous hyperelastic damage model for human periodontal ligament: Application of a microcomputerized tomography finite element model.
来源期刊：International journal for numerical methods in biomedical engineeringDOI：10.1002/cnm.3176
Reducing stress concentration on the cup rim of hip implants under edge loading.
来源期刊：International journal for numerical methods in biomedical engineeringDOI：10.1002/cnm.3149
Biomechanical modeling and computer simulation of the brain during neurosurgery
来源期刊：International journal for numerical methods in biomedical engineeringDOI：10.1002/cnm.3250
An explicit micro-FE approach to investigate the post-yield behaviour of trabecular bone under large deformations.
来源期刊：International journal for numerical methods in biomedical engineeringDOI：10.1002/cnm.3188
Geometrical effects in the hemodynamics of stenotic and non-stenotic left coronary arteries- numerical and in vitro approaches.
来源期刊：International journal for numerical methods in biomedical engineeringDOI：10.1002/cnm.3207
A computational study of lateral phase separation in biological membranes.
来源期刊：International journal for numerical methods in biomedical engineeringDOI：10.1002/cnm.3181
Electrophysiological models of the human pancreatic δ-cell: from single channels to the firing of action potentials.
来源期刊：International journal for numerical methods in biomedical engineeringDOI：10.1002/cnm.3296
Multiscale modeling of vascularized tissues via non-matching immersed methods
来源期刊：International journal for numerical methods in biomedical engineeringDOI：10.1002/cnm.3264
A new finite-element shell model for arterial growth and remodeling after stent implantation.
来源期刊：International journal for numerical methods in biomedical engineeringDOI：10.1002/cnm.3282
A machine learning method correlating pulse pressure wave data with pregnancy
来源期刊：International journal for numerical methods in biomedical engineeringDOI：10.1002/cnm.3272
Challenges and Opportunities for the Simulation of Calcium Waves on Modern Multi-Core and Many-Core Parallel Computing Platforms.
来源期刊：International journal for numerical methods in biomedical engineeringDOI：10.1002/cnm.3244
A finite difference method with subsampling for immersed boundary simulations of the capsule dynamics with viscoelastic membranes.
来源期刊：International journal for numerical methods in biomedical engineeringDOI：10.1002/cnm.3200
A new biological bone remodeling in silico model combined with advanced discretization methods.
来源期刊：International journal for numerical methods in biomedical engineeringDOI：10.1002/cnm.3196
Kinematic boundary conditions substantially impact in silico ventricular function.
来源期刊：International journal for numerical methods in biomedical engineeringDOI：10.1002/cnm.3151
The Variational Multiscale Formulation for the Fully-Implicit Log-Morphology Equation as a Tensor-Based Blood Damage Model.
来源期刊：International journal for numerical methods in biomedical engineeringDOI：10.1002/cnm.3262
Cell focal adhesion clustering leads to decreased and homogenized basal strains.
来源期刊：International journal for numerical methods in biomedical engineeringDOI：10.1002/cnm.3260
Topology optimization of fixed complete denture framework.
来源期刊：International journal for numerical methods in biomedical engineeringDOI：10.1002/cnm.3193
A comparison of the influence of three different lumbar interbody fusion approaches on stress in the pedicle screw fixation system: Finite element static and vibration analyses.
来源期刊：International journal for numerical methods in biomedical engineeringDOI：10.1002/cnm.3162
Gaussian sliding window for robust processing laser speckle contrast images.
来源期刊：International journal for numerical methods in biomedical engineeringDOI：10.1002/cnm.3186
Personalising cardiovascular network models in pregnancy: A two-tiered parameter estimation approach.
来源期刊：International journal for numerical methods in biomedical engineeringDOI：10.1002/cnm.3267
An optimized procedure to develop a 3-dimensional microfluidic hydrogel with parallel transport networks.
来源期刊：International journal for numerical methods in biomedical engineeringDOI：10.1002/cnm.3154
Optimization methodology for the material assignation in bioprinted scaffolds to achieve the desired stiffness over time.
来源期刊：International journal for numerical methods in biomedical engineeringDOI：10.1002/cnm.3248
A monolithic fluid-structure interaction framework applied to red blood cells.
来源期刊：International journal for numerical methods in biomedical engineeringDOI：10.1002/cnm.3171
Modelling the Hepatic Arterial Flow in Living Liver Donor after Left Hepatectomy and Postoperative Boundary Condition Exploration.
来源期刊：International journal for numerical methods in biomedical engineeringDOI：10.1002/cnm.3268
A finite element approach for gastrointestinal tissue mechanics.
来源期刊：International journal for numerical methods in biomedical engineeringDOI：10.1002/cnm.3269
Automated reduction of blood coagulation models.
来源期刊：International journal for numerical methods in biomedical engineeringDOI：10.1002/cnm.3220
A field-split preconditioning technique for fluid-structure interaction problems with applications in biomechanics
来源期刊：International journal for numerical methods in biomedical engineeringDOI：10.1002/cnm.3301
An algorithm for coupling multibranch in vitro experiment to numerical physiology simulation for a hybrid cardiovascular model.
来源期刊：International journal for numerical methods in biomedical engineeringDOI：10.1002/cnm.3289
Local and Global Energies for Shape Analysis in Medical Imaging.
来源期刊：International journal for numerical methods in biomedical engineeringDOI：10.1002/cnm.3252
Population-specific modelling of between/within-subject flow variability in the carotid arteries of the elderly.
来源期刊：International journal for numerical methods in biomedical engineeringDOI：10.1002/cnm.3271
A density-dependent FEM-FCT algorithm with application to modeling platelet aggregation.
来源期刊：International journal for numerical methods in biomedical engineeringDOI：10.1002/cnm.3212
Optimization schemes for endovascular repair with parallel technique based on hemodynamic analyses.
来源期刊：International journal for numerical methods in biomedical engineeringDOI：10.1002/cnm.3197
Quantification of blood flow patterns in the cerebral arterial circulation of individual (human) subjects.
来源期刊：International journal for numerical methods in biomedical engineeringDOI：10.1002/cnm.3288
Can interfaces at bracket-wire and between teeth in multi-teeth finite element model be simplified?
来源期刊：International journal for numerical methods in biomedical engineeringDOI：10.1002/cnm.3169
Simulation of orthodontic force of archwire applied to full dentition using virtual bracket displacement method.
来源期刊：International journal for numerical methods in biomedical engineeringDOI：10.1002/cnm.3189
Parameter estimation to study the immediate impact of aortic cross-clamping using reduced order models.
来源期刊：International journal for numerical methods in biomedical engineeringDOI：10.1002/cnm.3261
Augmented Resistive Immersed Surfaces valve model for the simulation of cardiac hemodynamics with isovolumetric phases.
来源期刊：International journal for numerical methods in biomedical engineeringDOI：10.1002/CNM.3223
Three-dimensional reconstruction of internal fascicles and microvascular structures of human peripheral nerves.
来源期刊：International journal for numerical methods in biomedical engineeringDOI：10.1002/cnm.3245
Computational intelligence based design of implant for varying bone conditions.
来源期刊：International journal for numerical methods in biomedical engineeringDOI：10.1002/cnm.3191
