Industrial Lubrication and Tribology provides a broad coverage of the materials and techniques employed in tribology. It contains a firm technical news element which brings together and promotes best practice in the three disciplines of tribology, which comprise lubrication, wear and friction. ILT also follows the progress of research into advanced lubricants, bearings, seals, gears and related machinery parts, as well as materials selection. A double-blind peer review process involving the editor and other subject experts ensures the content's validity and relevance.
工业润滑和摩擦学提供了广泛的材料和技术在摩擦学中使用的覆盖面。它包含一个坚定的技术新闻元素，汇集和促进最佳实践的三个学科的摩擦学，其中包括润滑，磨损和摩擦。ILT还跟踪先进润滑剂、轴承、密封件、齿轮和相关机械部件以及材料选择的研究进展。由编辑和其他学科专家参与的双盲同行评审流程确保了内容的有效性和相关性。
Investigations on tribological behaviour of AA7075-TiO2 composites under dry sliding conditions
来源期刊：Industrial Lubrication and TribologyDOI：10.1108/ILT-01-2019-0003
Experimental investigation of tribological effect on vegetable oil with CuO nanoparticles and ZDDP additives
来源期刊：Industrial Lubrication and TribologyDOI：10.1108/ILT-05-2018-0196
Effect of ageing on lubricants’ physical and chemical properties and tribological performance: Part II: effect of water contamination on lubricant
来源期刊：Industrial Lubrication and TribologyDOI：10.1108/ILT-01-2018-0025
Numerical study on steady state performance enhancement of partial textured hydrodynamic journal bearing
来源期刊：Industrial Lubrication and TribologyDOI：10.1108/ILT-03-2019-0083
Numerical study on sealing characteristic of rubber X-ring exposed to high-pressure hydrogen by considering swelling effect
来源期刊：Industrial Lubrication and TribologyDOI：10.1108/ILT-02-2018-0067
A comparative study of tribological performance of helical gear pair with various types of tooth surface finishing
来源期刊：Industrial Lubrication and TribologyDOI：10.1108/ILT-01-2017-0013
Erosion studies of cermet-coated ASTM A36 steel
来源期刊：Industrial Lubrication and TribologyDOI：10.1108/ILT-01-2018-0001
Influence of natural barytes purity levels on the tribological characteristics of non-asbestos brake pads
来源期刊：Industrial Lubrication and TribologyDOI：10.1108/ilt-10-2019-0424
Effect of form errors on oil film characteristics of hydrodynamic journal bearings based on small displacement torsor theory
来源期刊：Industrial Lubrication and TribologyDOI：10.1108/ILT-05-2017-0140
Study on the influence of round pits arrangement patterns on tribological properties of journal bearings
来源期刊：Industrial Lubrication and TribologyDOI：10.1108/ILT-07-2018-0264
Preparation and tribological properties of a microemulsion for magnesium alloy warm rolling
来源期刊：Industrial Lubrication and TribologyDOI：10.1108/ILT-06-2018-0222
Experimental verification of textured mechanical seal designed using multi-objective optimization
来源期刊：Industrial Lubrication and TribologyDOI：10.1108/ILT-11-2018-0398
Effects of CeO2 on the microstructure and tribological properties of atmospheric plasma-sprayed Cr2O3-TiO2 coatings
来源期刊：Industrial Lubrication and TribologyDOI：10.1108/ilt-06-2019-0229
The effect of ceramic friction pairs on the tribocorrosion behavior of AISI 304 stainless steel in seawater
来源期刊：Industrial Lubrication and TribologyDOI：10.1108/ILT-10-2018-0377
Erosion wear performance of Ni-Cr-O and NiCrBSiFe-WC(Co) composite coatings deposited by HVOF technique
来源期刊：Industrial Lubrication and TribologyDOI：10.1108/ILT-04-2018-0149
Lubricant and tribological properties of zinc compound in palm oil
来源期刊：Industrial Lubrication and TribologyDOI：10.1108/ILT-01-2019-0030
Effect of tribological parameters on sliding wear and friction coefficient which relates to preload loss in tapered roller bearing
来源期刊：Industrial Lubrication and TribologyDOI：10.1108/ILT-01-2017-0019
Investigating the influences of pressure-equalizing grooves on characteristics of aerostatic bearings based on CFD
来源期刊：Industrial Lubrication and TribologyDOI：10.1108/ILT-11-2018-0411
Tribological performance of commercial Mobil grade lubricants operating with titanium dioxide nanoparticle additives
来源期刊：Industrial Lubrication and TribologyDOI：10.1108/ILT-04-2018-0147
Dynamic characteristics of opposed-conical gas-dynamic bearings
来源期刊：Industrial Lubrication and TribologyDOI：10.1108/ilt-07-2019-0264
The effect of sea-water on the tribological properties of polyurethanes
来源期刊：Industrial Lubrication and TribologyDOI：10.1108/ILT-12-2018-0453
Tribological behavior of laser textured nodular cast iron surface
来源期刊：Industrial Lubrication and TribologyDOI：10.1108/ILT-08-2018-0327
Study on rheological properties of aviation lubricating oil under conditions of heavy load, high speed, and high temperature
来源期刊：Industrial Lubrication and TribologyDOI：10.1108/ILT-09-2018-0345
Magneto-hydrostatic lubrication of thrust bearings considering different configurations of recess
来源期刊：Industrial Lubrication and TribologyDOI：10.1108/ILT-10-2018-0370
Simulation and experiment on pressure field characteristics of hydrostatic hydrodynamic hybrid thrust bearings
来源期刊：Industrial Lubrication and TribologyDOI：10.1108/ILT-02-2018-0063
On a model for the prediction of asperity interactions of the coated friction pair
来源期刊：Industrial Lubrication and TribologyDOI：10.1108/ilt-06-2019-0232
The tribological performance of engineered micro-surface topography by picosecond laser on PEEK
来源期刊：Industrial Lubrication and TribologyDOI：10.1108/ilt-06-2019-0202
Experimental study on frictional loss of high-speed bearings based on free-deceleration and energy-balance methods
来源期刊：Industrial Lubrication and TribologyDOI：10.1108/ILT-07-2018-0281
Distribution effect of surface texture on the elastic deformation in soft contacts
来源期刊：Industrial Lubrication and TribologyDOI：10.1108/ilt-03-2019-0081
Characterization of the friction and wear effects of graphene nanoparticles in oil on the ring/cylinder liner of internal combustion engine
来源期刊：Industrial Lubrication and TribologyDOI：10.1108/ILT-05-2018-0170
Establishment and solution of governing equation for plana-grooved liquid seals based on three-control-volume theory
来源期刊：Industrial Lubrication and TribologyDOI：10.1108/ilt-06-2019-0228
Resource-efficient piston ring/cylinder liner pairing
来源期刊：Industrial Lubrication and TribologyDOI：10.1108/ILT-06-2018-0250
Experimental comparison of CuAl10Fe3 journal bearings sliding against two different coatings
来源期刊：Industrial Lubrication and TribologyDOI：10.1108/ILT-05-2018-0198
Effects of iron content on tribological properties of Cu-Fe-based friction material
来源期刊：Industrial Lubrication and TribologyDOI：10.1108/ILT-01-2019-0039
A comparative study on tribological properties of leaf-surface waxes extracted from coastal and inland plants
来源期刊：Industrial Lubrication and TribologyDOI：10.1108/ILT-05-2018-0205
Improvement of lubrication performance of water lubricated polymer bearing via enlarged axial end bearing diameter
来源期刊：Industrial Lubrication and TribologyDOI：10.1108/ILT-09-2018-0332
Effect of fish scale texture on friction performance for reciprocating pair with high velocity
来源期刊：Industrial Lubrication and TribologyDOI：10.1108/ilt-09-2019-0398
A numerical method to investigate the mixed lubrication performances of journal-thrust coupled bearings
来源期刊：Industrial Lubrication and TribologyDOI：10.1108/ILT-02-2019-0063
Fluid-structure interaction on the dynamic characteristics of the hydrostatic spindle in micro-scale
来源期刊：Industrial Lubrication and TribologyDOI：10.1108/ilt-07-2019-0261
Efficient running-in of gears and improved prediction of the tooth flank load carrying capacity
来源期刊：Industrial Lubrication and TribologyDOI：10.1108/ILT-07-2018-0272
Failure mechanisms of lubricating film on M50-Ag composites
来源期刊：Industrial Lubrication and TribologyDOI：10.1108/ilt-04-2019-0158
Study on the correlation between the running-in attractor and the wear particle group
来源期刊：Industrial Lubrication and TribologyDOI：10.1108/ilt-07-2019-0267
Influence of the grinding process on the tribological behavior of gear analogy test parts
来源期刊：Industrial Lubrication and TribologyDOI：10.1108/ILT-04-2018-0157
Optimal design of parallel sliders with square-shaped textures considering fluid-structure interaction
来源期刊：Industrial Lubrication and TribologyDOI：10.1108/ILT-09-2018-0366
Friction and wear properties of three different steels against paper-based friction material
来源期刊：Industrial Lubrication and TribologyDOI：10.1108/ILT-01-2019-0023
Improved biodegradability and tribological performances of mineral lubricating oil by two synthetic nitrogenous heterocyclic additives
来源期刊：Industrial Lubrication and TribologyDOI：10.1108/ILT-06-2018-0216
The tribological properties of bulk Fe2B with pre-oxidation treatment at 750°C in air
来源期刊：Industrial Lubrication and TribologyDOI：10.1108/ilt-04-2019-0151
A prediction method for wheel tread wear
来源期刊：Industrial Lubrication and TribologyDOI：10.1108/ILT-10-2018-0397
Tribological properties of soft/hard hybrid surface of Babbitt alloy/steel
来源期刊：Industrial Lubrication and TribologyDOI：10.1108/ilt-07-2019-0262
Effect of roughness on sealing performance of oil seals with surface texture
来源期刊：Industrial Lubrication and TribologyDOI：10.1108/ILT-03-2019-0069
