The International Journal of Mechanical Sciences (IJMS) is an international forum for the publication and dissemination of original work which contributes to greater scientific understanding of the main disciplines underpinning the mechanical, civil and material engineering sciences.Original contributions providing insight into the use of analytical, computational (e.g. FEM, BEM, mesh-free methods and others) modelling methods for rigid-body mechanics (e.g. dynamics, vibration, stability), structural mechanics, metal forming, behaviour and application of advanced materials (metals, composite, cellular, smart etc.), impact mechanics, strain localization and other effects of nonlinearity (e.g. large deflections, plasticity, fracture etc.), fluid mechanics (external and internal flows), tribology, thermodynamics and materials processing generally form the core of the journal contents.The International Journal of Mechanical Sciences does not accept for publication material which quite specifically belongs with other established specialist journals. Papers whose concern is primarily with mathematical or computational techniques, developed within a general framework and not aimed at any specific engineering application, are not requested. Similarly, papers whose content is purely descriptive or empirical and which do not make any scientific contribution, will not be considered. Comparison with experiments/tests conducted by the authors or others to validate the main contribution of the paper are strongly encouraged, however design-based studies, based on established formulae and methods, are outside our scope and should not be submitted to the International Journal of Mechanical Sciences.
国际机械科学杂志（IJMS）是一个出版和传播原创作品的国际论坛，这些原创作品有助于更好地理解支撑机械、土木和材料工程科学的主要学科。（例如FEM、BEM、无网格法等）刚体力学（例如动力学、振动、稳定性）、结构力学、金属成形、先进材料（金属、复合材料、蜂窝状材料、智能材料等）的行为和应用的建模方法，冲击力学、应变局部化和其他非线性效应（例如大挠度、塑性、断裂等），流体力学（外部和内部流动）、摩擦学、热力学和材料加工通常构成期刊内容的核心。2国际机械科学杂志不接受专门属于其他专业期刊的出版材料。论文主要涉及数学或计算技术，在一般框架内发展，不针对任何具体的工程应用，不要求。同样，内容纯粹是描述性或经验性的论文，以及没有任何科学贡献的论文，将不予考虑。强烈鼓励与作者或其他人进行的实验/测试进行比较，以验证论文的主要贡献，但基于既定公式和方法的基于设计的研究不在我们的范围内，不应提交给《国际机械科学杂志》。
Resonance behavior of functionally graded polymer composite nanoplates reinforced with graphene nanoplatelets
来源期刊：International Journal of Mechanical SciencesDOI：10.1016/J.IJMECSCI.2019.03.036
The effects of tape insert material on the flow and heat transfer in a nanofluid-based double tube heat exchanger: Two-phase mixture model
来源期刊：International Journal of Mechanical SciencesDOI：10.1016/J.IJMECSCI.2019.04.009
Nonlinear vibration analysis of an electrostatic functionally graded nano-resonator with surface effects based on nonlocal strain gradient theory
来源期刊：International Journal of Mechanical SciencesDOI：10.1016/J.IJMECSCI.2018.11.030
Feasibility study of the Ti(C7N3)-based cermet micro-mill based on dynamic fatigue behavior and modeling of the contact stress distribution on the round cutting edge
来源期刊：International Journal of Mechanical SciencesDOI：10.1016/J.IJMECSCI.2019.02.038
Safety evaluation of masonry arches. A numerical procedure based on the thrust line closest to the geometrical axis
来源期刊：International Journal of Mechanical SciencesDOI：10.1016/J.IJMECSCI.2019.02.036
Effect of the residual stress on contact fatigue of a wind turbine carburized gear with multiaxial fatigue criteria
来源期刊：International Journal of Mechanical SciencesDOI：10.1016/J.IJMECSCI.2018.11.013
Surface roughness prediction model of SiCp/Al composite in grinding
来源期刊：International Journal of Mechanical SciencesDOI：10.1016/J.IJMECSCI.2019.02.025
MHD mixed convection of nanofluids in the presence of multiple rotating cylinders in different configurations: A two-phase numerical study
来源期刊：International Journal of Mechanical SciencesDOI：10.1016/J.IJMECSCI.2018.10.037
Transient cooling characteristics of Al2O3-water nanofluid flow in a microchannel subject to a sudden-pulsed heat flux
来源期刊：International Journal of Mechanical SciencesDOI：10.1016/J.IJMECSCI.2018.11.017
Moving element analysis of partially filled freight trains subject to abrupt braking
来源期刊：International Journal of Mechanical SciencesDOI：10.1016/J.IJMECSCI.2018.11.011
Subharmonics and ultra-subharmonics of a bio-inspired nonlinear isolation system
来源期刊：International Journal of Mechanical SciencesDOI：10.1016/J.IJMECSCI.2018.12.054
Determining the coefficients of a homogeneous anisotropic hardening model for ultrathin steel sheets
来源期刊：International Journal of Mechanical SciencesDOI：10.1016/J.IJMECSCI.2019.04.050
On size-dependent dynamic behavior of rotating functionally graded Kirchhoff microplates
来源期刊：International Journal of Mechanical SciencesDOI：10.1016/J.IJMECSCI.2018.12.045
A new constitutive model of micro-particle reinforced metal matrix composites with damage effects
来源期刊：International Journal of Mechanical SciencesDOI：10.1016/J.IJMECSCI.2019.01.024
An ocean wave-based piezoelectric energy harvesting system using breaking wave force
来源期刊：International Journal of Mechanical SciencesDOI：10.1016/J.IJMECSCI.2018.12.008
Stiffness prediction of short fiber reinforced composites
来源期刊：International Journal of Mechanical SciencesDOI：10.1016/J.IJMECSCI.2019.105068
Effects of the Reynolds number and structural damping on vortex-induced vibrations of elastically-mounted rigid cylinder
来源期刊：International Journal of Mechanical SciencesDOI：10.1016/J.IJMECSCI.2019.03.024
Determination of the strength of a multilayer BCC lattice structure with face sheets
来源期刊：International Journal of Mechanical SciencesDOI：10.1016/J.IJMECSCI.2019.01.026
A unified approach for predicting the free vibration of an elastically restrained plate with arbitrary holes
来源期刊：International Journal of Mechanical SciencesDOI：10.1016/J.IJMECSCI.2019.06.003
The effect of adhesion and roughness on friction hysteresis loops
来源期刊：International Journal of Mechanical SciencesDOI：10.1016/J.IJMECSCI.2019.02.027
Three-dimensional analysis of composite FGM rectangular plates with in-plane heterogeneity
来源期刊：International Journal of Mechanical SciencesDOI：10.1016/J.IJMECSCI.2019.07.004
Forced convection around horizontal tubes bundles of a heat exchanger using a two-phase mixture model: Effects of nanofluid and tubes Configuration
来源期刊：International Journal of Mechanical SciencesDOI：10.1016/J.IJMECSCI.2019.105056
On the effect of grain structure in micro-cutting of polycrystalline aluminate magnesium spinel (PAMS) crystals
来源期刊：International Journal of Mechanical SciencesDOI：10.1016/J.IJMECSCI.2019.07.003
Experimental and numerical investigation of ductile fracture using GTN damage model on in-situ tensile tests
来源期刊：International Journal of Mechanical SciencesDOI：10.1016/j.ijmecsci.2019.105170
Lattice Boltzmann simulation of double diffusive natural convection of nanofluids in an enclosure with heat conducting partitions and sinusoidal boundary conditions
来源期刊：International Journal of Mechanical SciencesDOI：10.1016/J.IJMECSCI.2019.07.002
Investigation of cracking behavior and mechanism of sandstone specimens with a hole under compression
来源期刊：International Journal of Mechanical SciencesDOI：10.1016/J.IJMECSCI.2019.105084
An investigation of surface topography and workpiece temperature in whirling milling machining
来源期刊：International Journal of Mechanical SciencesDOI：10.1016/j.ijmecsci.2019.105182
Bridging micro-to-macro scale damage in UD-FRP laminates under tensile loading
来源期刊：International Journal of Mechanical SciencesDOI：10.1016/J.IJMECSCI.2019.03.039
Analytical solution for free vibration of cracked orthotropic cylindrical shells
来源期刊：International Journal of Mechanical SciencesDOI：10.1016/J.IJMECSCI.2019.02.004
Closed-form solutions to optimal parameters of dynamic vibration absorbers with negative stiffness under harmonic and transient excitation
来源期刊：International Journal of Mechanical SciencesDOI：10.1016/J.IJMECSCI.2019.05.005
Novel experimental method to determine the limit strain by means of thickness variation
来源期刊：International Journal of Mechanical SciencesDOI：10.1016/J.IJMECSCI.2019.01.036
Buckling of multiply connected bar-chain and its associated continualized nonlocal model
来源期刊：International Journal of Mechanical SciencesDOI：10.1016/J.IJMECSCI.2018.10.015
An analytical solution for elastic buckling analysis of stiffened panel subjected to pure bending
来源期刊：International Journal of Mechanical SciencesDOI：10.1016/J.IJMECSCI.2019.105024
Controlled flow over a finite square cylinder using suction and blowing
来源期刊：International Journal of Mechanical SciencesDOI：10.1016/J.IJMECSCI.2019.04.013
Meshfree simulation of metal cutting: an updated Lagrangian approach with dynamic refinement
来源期刊：International Journal of Mechanical SciencesDOI：10.1016/J.IJMECSCI.2019.06.045
Analytical, numerical and experimental study of the plastic buckling behavior of thick cylindrical tubes under axial compression
来源期刊：International Journal of Mechanical SciencesDOI：10.1016/J.IJMECSCI.2019.03.002
A reduced multimodal thermoelastic model of a circular Mindlin plate
来源期刊：International Journal of Mechanical SciencesDOI：10.1016/J.IJMECSCI.2019.02.010
Investigation on exit burr in robotic rotary ultrasonic drilling of CFRP/aluminum stacks
来源期刊：International Journal of Mechanical SciencesDOI：10.1016/J.IJMECSCI.2018.12.039
A fully coupled thermo-viscoelastic-viscoplastic-damage framework to study the cyclic variability of the Taylor-Quinney coefficient for semi-crystalline polymers
来源期刊：International Journal of Mechanical SciencesDOI：10.1016/j.ijmecsci.2019.105128
The mixed regime and wear mechanism of elliptical contact in the start-up process considering interface material properties: A theoretical prediction
来源期刊：International Journal of Mechanical SciencesDOI：10.1016/J.IJMECSCI.2019.04.016
Dynamic mechanical behavior, damage mode and mechanism of multi-scale high energy insensitive particulate reinforced composites of a new type of anti-missile sandwich wall structure
来源期刊：International Journal of Mechanical SciencesDOI：10.1016/J.IJMECSCI.2019.105070
Enhanced strength and weakened dynamic sensitivity of honeycombs by parallel design
来源期刊：International Journal of Mechanical SciencesDOI：10.1016/J.IJMECSCI.2018.12.013
Mechanical analysis of non-perpendicularly crossed steel wires in frictional wear
来源期刊：International Journal of Mechanical SciencesDOI：10.1016/J.IJMECSCI.2019.03.030
A constitutive model for block-copolymers based on effective temperature
来源期刊：International Journal of Mechanical SciencesDOI：10.1016/J.IJMECSCI.2019.105082
Modelling and parametric design of a pneumatic soft stepper motor
来源期刊：International Journal of Mechanical SciencesDOI：10.1016/J.IJMECSCI.2019.105019
State-vector equation method for the frequency domain spectral element modeling of non-uniform one-dimensional structures
来源期刊：International Journal of Mechanical SciencesDOI：10.1016/J.IJMECSCI.2019.04.030
Quasi-3D dynamic analysis of rotating FGM beams using a modified Fourier spectral approach
来源期刊：International Journal of Mechanical SciencesDOI：10.1016/J.IJMECSCI.2019.105087
Distribution of residual stress in an asymmetric T-section beam by stretch-bending
来源期刊：International Journal of Mechanical SciencesDOI：10.1016/j.ijmecsci.2019.105184
Modeling joints with multiple members in Hencky bar-chain model for buckling analysis of frames
来源期刊：International Journal of Mechanical SciencesDOI：10.1016/j.ijmecsci.2019.105165
Nonlinear dynamics of locally pulse loaded square Föppl–von Kármán thin plates
来源期刊：International Journal of Mechanical SciencesDOI：10.1016/j.ijmecsci.2019.105157
