Strength of Materials focuses on the strength of materials and structural components subjected to different types of force and thermal loadings, the limiting strength criteria of structures, and the theory of strength of structures. Consideration is given to actual operating conditions, problems of crack resistance and theories of failure, the theory of oscillations of real mechanical systems, and calculations of the stress-strain state of structural components.
材料强度主要研究承受不同类型力和热载荷的材料和结构部件的强度、结构的极限强度准则以及结构强度理论。考虑了实际操作条件、抗裂性问题和失效理论、真实的机械系统的振荡理论以及结构部件的应力应变状态的计算。
Study of Bond Properties of Steel Rebars with Recycled Aggregate Concrete. Analytical Modeling
来源期刊：Strength of MaterialsDOI：10.1007/s11223-019-00062-z
Determination of Effective Characteristics of the Fibrous Viscoelastic Composite with Transversal and Isotropic Components
来源期刊：Strength of MaterialsDOI：10.1007/s11223-019-00064-x
Process Analysis and Trial Tests for Hot-Rolled Stainless Steel/Carbon Steel Clad Plates
来源期刊：Strength of MaterialsDOI：10.1007/s11223-019-00046-z
Ductile-to-Brittle Transition and Impact Fracture Behavior of 3Mn–Si–Ni Low Carbon Martensitic Steel
来源期刊：Strength of MaterialsDOI：10.1007/s11223-019-00075-8
Fatigue Life Prediction by a Local Stress-Strain Criterion for Hole-Containing Specimens After Precompression of Their Material
来源期刊：Strength of MaterialsDOI：10.1007/s11223-019-00065-w
Physical Simulation-Based Characterization of HAZ Properties in Steels. Part 1. High-Strength Steels and Their Hardness Profiling
来源期刊：Strength of MaterialsDOI：10.1007/s11223-019-00094-5
Optimization of Residual Stresses in Laser-Mixed WC(Co, Ni) Coatings
来源期刊：Strength of MaterialsDOI：10.1007/s11223-019-00054-z
Centrifuge Simulation of the Thermal Response of a Dry Sand-Embedded Diaphragm Wall
来源期刊：Strength of MaterialsDOI：10.1007/s11223-019-00050-3
A Setup for Complex Investigation of Mechanical Characteristics of Structural Materials for NPP Equipment
来源期刊：Strength of MaterialsDOI：10.1007/s11223-019-00077-6
Structural Optimization of Waffle Shell Sections in Launch Vehicles
来源期刊：Strength of MaterialsDOI：10.1007/s11223-019-00068-7
Influence of Axial Force on Tensile Strength and Microstructural Characteristics of Friction Stir Buttwelded Aluminum Alloy/Steel Joints
来源期刊：Strength of MaterialsDOI：10.1007/s11223-019-00076-7
Fracture Behavior of Single-Crystal Alloys Under Thermocyclic Loading
来源期刊：Strength of MaterialsDOI：10.1007/s11223-019-00066-9
Development of Graphene Nanoplatelets-Reinforced Thermo-Responsive Shape Memory Nanocomposites for High Recovery Force Applications
来源期刊：Strength of MaterialsDOI：10.1007/s11223-019-00130-4
Stress-Strain and form Accuracy of Carbon Steel Components Produced by a Multi-Point Stretch Forming Technique
来源期刊：Strength of MaterialsDOI：10.1007/s11223-019-00114-4
Solution to the Task of Elastic Axial Compression–Tension of the Composite Multilayered Cylindrical Beam
来源期刊：Strength of MaterialsDOI：10.1007/s11223-019-00070-z
A Study of the Stress State of Underground Gas Pipelines in Mine Working Zones Using the Method of Internal Response Function
来源期刊：Strength of MaterialsDOI：10.1007/s11223-019-00071-y
Fatigue Strength and Life Prediction of a MAR-M247 Nickel-Base Superalloy Gas Turbine Blade with Multiple Carbide Inclusions
来源期刊：Strength of MaterialsDOI：10.1007/s11223-019-00055-y
Effects of Undercooling and Transformation Time on Microstructure and Strength of Fe–C–Mn–Si Superbainitic Steel
来源期刊：Strength of MaterialsDOI：10.1007/s11223-019-00090-9
Density Effect of PTFE-Copper Powder Metallurgy Liner Material on the Perforation Performance of Shaped Charge Jets
来源期刊：Strength of MaterialsDOI：10.1007/s11223-019-00108-2
A Novel Inclined Excitation Method for Crack Detection of Non-Ferromagnetic Materials Using Eddy Current Thermography
来源期刊：Strength of MaterialsDOI：10.1007/s11223-019-00101-9
Longitudinal Fracture Analysis of Nonlinear Elastic Circular Shafts Loaded in Torsion
来源期刊：Strength of MaterialsDOI：10.1007/s11223-019-00073-w
Effect of Heat Treatment on the Microstructure and Strength of Stainless Steel-Clad Plate
来源期刊：Strength of MaterialsDOI：10.1007/s11223-019-00100-w
Statistical Characteristics of Microplastic Strains of the Surface Layer of Austenitic Steel Under Monotonic and High-Cycle Loadings
来源期刊：Strength of MaterialsDOI：10.1007/s11223-020-00138-1
Fatigue Life Prediction of the Gear Box in Tracked Vehicles Based on Running Simulation Tests
来源期刊：Strength of MaterialsDOI：10.1007/s11223-019-00103-7
Influence of H2S Corrosion on Tensile Properties and Fracture Toughness of X80 Pipeline Steel
来源期刊：Strength of MaterialsDOI：10.1007/s11223-019-00060-1
Effect of Hydraulic Liquid and Sea Water on the Mechanical Characteristics of Polymeric Fibrous Structures
来源期刊：Strength of MaterialsDOI：10.1007/s11223-019-00072-x
Shear Fracture Model of Ultrasonic Cutting for an Aramid Paper Honeycomb
来源期刊：Strength of MaterialsDOI：10.1007/s11223-019-00099-0
Effect of Drilling-Induced Delamination on Buckling Behavior of Open Hole Composite Laminate Specimens Under Compressive Loading
来源期刊：Strength of MaterialsDOI：10.1007/s11223-019-00109-1
Effect of Boundary Form Disturbances on the Frequency Response of Planar Vibrations of Piezoceramic Plates. Experimental Investigation
来源期刊：Strength of MaterialsDOI：10.1007/s11223-019-00067-8
Assessment of Cold Extrusion Effect on Stress–Strain Curves of Pure Copper Arc Parts Based on the Cosine Velocity Model
来源期刊：Strength of MaterialsDOI：10.1007/s11223-019-00102-8
Rebar Corrosion Rate Estimation of Reinforced Concrete Components Exposed to Marine Environment
来源期刊：Strength of MaterialsDOI：10.1007/s11223-019-00112-6
Stress-Strain State and Damage in Polymer Parts of Instruments Aboard Artificial Satellites
来源期刊：Strength of MaterialsDOI：10.1007/s11223-019-00069-6
Calculation-and-Experimental Investigation on Natural Frequencies and Oscillation Modes of Pairwise-Shrouded Cooled Turbine Blades
来源期刊：Strength of MaterialsDOI：10.1007/s11223-020-00133-6
Tensile Fracture Behavior of Carbon Fiber/Al Composites Produced by the Liquid Extrusion Infiltration Technique
来源期刊：Strength of MaterialsDOI：10.1007/s11223-019-00104-6
Microstructure Variation of Ultrasuper Critical 11Cr Ferritic Steel Under Long-Term Thermal Ageing and Creep
来源期刊：Strength of MaterialsDOI：10.1007/s11223-019-00095-4
Effect of Sampling Interval and Anisotropy on Laser Scanning Accuracy in Rock Material Surface Roughness Measurements
来源期刊：Strength of MaterialsDOI：10.1007/s11223-019-00115-3
Calculation of the γ-TiAl Lattice Resistance
来源期刊：Strength of MaterialsDOI：10.1007/s11223-019-00049-w
Thermomechanical Coupling Model for a Stainless Steel-Clad Plate on Heat Treatment
来源期刊：Strength of MaterialsDOI：10.1007/s11223-019-00048-x
Residual Stresses in Ultrasonic-Assisted Laser Sintered Grinding Diamond Materials
来源期刊：Strength of MaterialsDOI：10.1007/s11223-019-00105-5
Effect of Shock and Vibration Preloading on the Deformation and Fracture Behavior of 17G1S-U Steel
来源期刊：Strength of MaterialsDOI：10.1007/s11223-019-00088-3
Stress Corrosion of Bridge Cable Wire by the Response Surface Method
来源期刊：Strength of MaterialsDOI：10.1007/s11223-019-00111-7
Compression Behavior of Biodegradable Thermoplastic Plasticizer-Containing Composites
来源期刊：Strength of MaterialsDOI：10.1007/s11223-019-00045-0
Effect of the Surface Texture on Laser Joining of a Carbon Fiber-Reinforced Thermosetting Plastic and Stainless Steel
来源期刊：Strength of MaterialsDOI：10.1007/s11223-019-00057-w
Effect of Pin Diameters on the Wear Characteristics of Friction Pairs
来源期刊：Strength of MaterialsDOI：10.1007/s11223-019-00051-2
Effect of Zn on the Mechanical Properties and Microstructure of as-Cast and Solution-Treated Mg–6Y–2Nd–1Gd–0.5Zr Alloys
来源期刊：Strength of MaterialsDOI：10.1007/s11223-019-00107-3
Residual Stress Effect on the Strength Estimate of Base-Coating Systems
来源期刊：Strength of MaterialsDOI：10.1007/s11223-019-00125-1
Physical Simulation-Based Characterization of HAZ Properties in Steels. Part 2. Dual-Phase Steels
来源期刊：Strength of MaterialsDOI：10.1007/s11223-019-00128-y
Creep of Textile-Reinforced Composite Under Static and Cyclic Loads
来源期刊：Strength of MaterialsDOI：10.1007/s11223-019-00086-5
Microstructure-Based Model for Sharp Stress Raiser-Related Fatigue Stage Length Assessment
来源期刊：Strength of MaterialsDOI：10.1007/s11223-019-00082-9
Statistical Inference of Constant-Stress Partially Accelerated Life Test Model Using Failure-Censored Data from the Linear Failure Rate Distribution
来源期刊：Strength of MaterialsDOI：10.1007/s11223-019-00127-z
