IET Electric Power Applications publishes papers of a high technical standard with a suitable balance of practice and theory. The scope covers a wide range of applications and apparatus in the power field. In addition to papers focussing on the design and development of electrical equipment, papers relying on analysis are also sought, provided that the arguments are conveyed succinctly and the conclusions are clear.The scope of the journal includes the following:The design and analysis of motors and generators of all sizesRotating electrical machinesLinear machinesActuatorsPower transformersRailway traction machines and drivesVariable speed drivesMachines and drives for electrically powered vehiclesIndustrial and non-industrial applications and processesCurrent Special Issue. Call for papers: Progress in Electric Machines, Power Converters and their Control for Wave Energy Generation - https://digital-library.theiet.org/files/IET_EPA_CFP_PEMPCCWEG.pdf
IET电力应用出版高技术标准的论文，实践和理论的适当平衡。范围涵盖电力领域的广泛应用和设备。除了专注于电气设备设计和开发的论文外，还寻求依赖于分析的论文，前提是论点传达简洁，结论清晰。杂志的范围包括以下内容：各种尺寸的电动机和发电机的设计和分析旋转电机线性电机执行器电力变压器铁路牵引机械和驱动变速驱动电动车辆的机械和驱动工业和非工业应用和工艺本期特刊。征稿：波浪能发电用电机、功率变换器及其控制的进展-https://digital-library.theiet.org/files/IET_EPA_CFP_PEMPCCWEG.pdf
Permanent magnet vernier machine: a review
来源期刊：Iet Electric Power ApplicationsDOI：10.1049/IET-EPA.2018.5474
Multi-objective optimisation design and performance comparison of permanent magnet synchronous motor for EVs based on FEA
来源期刊：Iet Electric Power ApplicationsDOI：10.1049/IET-EPA.2019.0069
Online maximum torque per power losses strategy for indirect rotor flux-oriented control-based induction motor drives
来源期刊：Iet Electric Power ApplicationsDOI：10.1049/IET-EPA.2018.5403
Review on the evolution of technology advancements and applications of line-start synchronous machines
来源期刊：Iet Electric Power ApplicationsDOI：10.1049/IET-EPA.2018.5283
Fault-tolerant control of DSBLDC motor drive under open-circuit faults
来源期刊：Iet Electric Power ApplicationsDOI：10.1049/IET-EPA.2018.5240
Decoupling start control method for aircraft wound-rotor synchronous starter-generator based on main field current estimation
来源期刊：Iet Electric Power ApplicationsDOI：10.1049/IET-EPA.2018.5140
Design and multi-objective optimisation of switched reluctance machine with iron loss
来源期刊：Iet Electric Power ApplicationsDOI：10.1049/IET-EPA.2018.5699
Analysis of coupling between two sub-machines in co-axis dual-mechanical-port flux-switching PM machine for fuel-based extended range electric vehicles
来源期刊：Iet Electric Power ApplicationsDOI：10.1049/IET-EPA.2018.5400
Experimental behaviour analysis for optimally controlled standalone DFIG system
来源期刊：Iet Electric Power ApplicationsDOI：10.1049/IET-EPA.2018.5648
Optimal current control for PMSM considering inverter output voltage limit: model predictive control and pulse-width modulation
来源期刊：Iet Electric Power ApplicationsDOI：10.1049/IET-EPA.2019.0225
New adaptive fuzzy sliding mode scheme for speed control of linear switched reluctance motor
来源期刊：Iet Electric Power ApplicationsDOI：10.1049/IET-EPA.2018.5764
Influence of asymmetrical stator axes on the electromagnetic field and driving characteristics of canned induction motor
来源期刊：Iet Electric Power ApplicationsDOI：10.1049/IET-EPA.2019.0060
Generalised fault diagnostic method for power transistors in asymmetric half-bridge power converter of SRM drive
来源期刊：Iet Electric Power ApplicationsDOI：10.1049/IET-EPA.2018.5375
Analysis and design method of a combined radial–axial magnetic bearing based on asymmetric factor
来源期刊：Iet Electric Power ApplicationsDOI：10.1049/IET-EPA.2018.5347
On the broken rotor bar diagnosis using time–frequency analysis: ‘Is one spectral representation enough for the characterisation of monitored signals?’
来源期刊：Iet Electric Power ApplicationsDOI：10.1049/IET-EPA.2018.5512
Multi-objective optimisation of a permanent magnet flux-switching motor by combined parameter sensitivities analysis with non-linear varying-network magnetic circuit method
来源期刊：Iet Electric Power ApplicationsDOI：10.1049/IET-EPA.2018.5041
Tuning the rotor time constant parameter of IM using the minimum order recursive linear least square estimator
来源期刊：Iet Electric Power ApplicationsDOI：10.1049/IET-EPA.2018.5459
Effects of static eccentricity on the no-load back electromotive force of external rotor permanent magnet brushless DC motor used as in-wheel motor
来源期刊：Iet Electric Power ApplicationsDOI：10.1049/IET-EPA.2018.5394
Multiphysics analysis of printed circuit board winding for high-speed axial flux permanent magnet motor
来源期刊：Iet Electric Power ApplicationsDOI：10.1049/IET-EPA.2018.5752
Design and optimisation of transverse flux machine with passive rotor and flux-concentrating structure
来源期刊：Iet Electric Power ApplicationsDOI：10.1049/iet-epa.2018.5793
Direct torque control of a permanent magnet synchronous machine for hybrid hydraulic excavator
来源期刊：Iet Electric Power ApplicationsDOI：10.1049/IET-EPA.2018.5180
Novel repulsive magnetic bearing flywheel system with composite adaptive control
来源期刊：Iet Electric Power ApplicationsDOI：10.1049/IET-EPA.2018.5312
Switched capacitors 9-level module (SC9LM) with reduced device count for multilevel DC to AC power conversion
来源期刊：Iet Electric Power ApplicationsDOI：10.1049/IET-EPA.2019.0053
An equivalent circuit of the single-sided linear induction motor considering the discontinuous secondary
来源期刊：Iet Electric Power ApplicationsDOI：10.1049/IET-EPA.2018.5184
Performance improvement in six-phase symmetrical induction motor by using synthetic voltage vector based direct torque control
来源期刊：Iet Electric Power ApplicationsDOI：10.1049/IET-EPA.2018.5983
Determination of transformer HV winding axial displacement extent using hyperbolic method – a feasibility study
来源期刊：Iet Electric Power ApplicationsDOI：10.1049/IET-EPA.2018.5545
Optimisation design of real-time wireless power supply system overhead high-voltage power line
来源期刊：Iet Electric Power ApplicationsDOI：10.1049/IET-EPA.2018.5498
Analysis and implementation of a new method to retain the original speed and torque of synchronous reluctance motor during sustained voltage dip
来源期刊：Iet Electric Power ApplicationsDOI：10.1049/IET-EPA.2019.0100
Efficiency improvement of IPMSG in the electric power generating system of a range-extended electric vehicle
来源期刊：Iet Electric Power ApplicationsDOI：10.1049/IET-EPA.2018.5387
Investigation on the multi-DoF 3-D model and levitation behaviour of radial-type superconducting magnetic bearing
来源期刊：Iet Electric Power ApplicationsDOI：10.1049/IET-EPA.2018.5293
Modelling and experimental research on the equivalent magnetic circuit network of hybrid magnetic couplers considering the magnetic leakage effect
来源期刊：Iet Electric Power ApplicationsDOI：10.1049/IET-EPA.2018.5808
Design methodologies for the output power maximisation of synchronous reluctance machines
来源期刊：Iet Electric Power ApplicationsDOI：10.1049/IET-EPA.2018.5801
Evaluation of an STSMO-based estimator for power control of rotor-tied DFIG systems
来源期刊：Iet Electric Power ApplicationsDOI：10.1049/IET-EPA.2019.0035
Modified switching scheme-based explicit torque control of brush-less direct current motor drive
来源期刊：Iet Electric Power ApplicationsDOI：10.1049/IET-EPA.2018.5662
Interplane cross-saturation in multiphase machines
来源期刊：Iet Electric Power ApplicationsDOI：10.1049/IET-EPA.2018.5546
Development of a new approach to core quality assessment of modern electrical machines.
来源期刊：Iet Electric Power ApplicationsDOI：10.1049/IET-EPA.2018.5276
Analysis of an eddy current brake for an actuator of a high-voltage direct current circuit breaker
来源期刊：Iet Electric Power ApplicationsDOI：10.1049/IET-EPA.2019.0002
Time-domain computation of rotational iron losses considering the bulk conductivity for PMSMs
来源期刊：Iet Electric Power ApplicationsDOI：10.1049/IET-EPA.2018.5395
Minimising torque ripple of SRM by applying DB-DTFC
来源期刊：Iet Electric Power ApplicationsDOI：10.1049/IET-EPA.2018.5441
Quad-bus motor drive system for electrified vehicles based on a dual-output-single-inductor structure
来源期刊：Iet Electric Power ApplicationsDOI：10.1049/IET-EPA.2019.0295
Novel semi-analytical method for mutual inductance calculation of the thin spiral disk coils
来源期刊：Iet Electric Power ApplicationsDOI：10.1049/IET-EPA.2019.0206
One-cycle decoupling control method of multi-leg switching power amplifier for magnetic bearing system
来源期刊：Iet Electric Power ApplicationsDOI：10.1049/IET-EPA.2018.5792
Research on power-angle characteristics of permanent magnet linear synchronous motor
来源期刊：Iet Electric Power ApplicationsDOI：10.1049/IET-EPA.2018.5711
Space vector PWM algorithm for a three-level asymmetrical six-phase motor drive
来源期刊：Iet Electric Power ApplicationsDOI：10.1049/IET-EPA.2019.0059
Rotor position tolerant detection method for SRM drive system with misaligned position sensors
来源期刊：Iet Electric Power ApplicationsDOI：10.1049/IET-EPA.2018.5243
Improve the performance characteristics of the IPMSM under the effect of the varying loads
来源期刊：Iet Electric Power ApplicationsDOI：10.1049/IET-EPA.2019.0195
Extended second central moment approach to detect turn-to-turn faults in power transformers
来源期刊：Iet Electric Power ApplicationsDOI：10.1049/IET-EPA.2018.5689
Reducing root-mean-square current stress on the DC link capacitor of a five-phase electric drive through multiple carrier pulse-width modulation technique
来源期刊：Iet Electric Power ApplicationsDOI：10.1049/IET-EPA.2019.0181
Coupling calculation and analysis of three-dimensional temperature and fluid field for high-power high-speed permanent magnet machine
来源期刊：Iet Electric Power ApplicationsDOI：10.1049/IET-EPA.2018.5725
Two-Stage optimization based finite state predictive torque control for 3L-NPC inverter Fed IM drives
来源期刊：Iet Electric Power ApplicationsDOI：10.1049/IET-EPA.2018.5052
