Dental Materials Journal is a peer review journal published by the Japanese Society for Dental Materials and Devises aiming to introduce the progress of the basic and applied sciences in dental materials and biomaterials. The dental materials-related clinical science and instrumental technologies are also within the scope of this journal. The materials dealt include synthetic polymers, ceramics, metals and tissue-derived biomaterials. Forefront dental materials and biomaterials used in developing filed, such as tissue engineering, bioengineering and artificial intelligence, are positively considered for the review as well. Recent acceptance rate of the submitted manuscript in the journal is around 30%.
《牙科材料杂志》是日本牙科材料与器械学会出版的同行评议期刊，旨在介绍牙科材料和生物材料的基础和应用科学进展。牙科材料相关的临床科学和仪器技术也在本期刊的范围内。所涉及的材料包括合成聚合物、陶瓷、金属和组织衍生生物材料。同时，对口腔材料的前沿研究和组织工程、生物工程、人工智能等新兴领域的生物材料的研究也给予了积极的评价。近期投稿在期刊上的接受率在30%左右。
The use of bioactive particles and biomimetic analogues for increasing the longevity of resin-dentin interfaces: A literature review.
来源期刊：Dental materials journalDOI：10.4012/dmj.2019-293
In vitro evaluation of visible light-activated titanium dioxide photocatalysis for in-office dental bleaching.
来源期刊：Dental materials journalDOI：10.4012/dmj.2017-199
Influence of SiO2 content of polyetheretherketone (PEEK) on flexural properties and tensile bond strength to resin cement.
来源期刊：Dental materials journalDOI：10.4012/dmj.2018-234
Polytetrafluoroethylene (PTFE): A resin material for possible use in dental prostheses and devices.
来源期刊：Dental materials journalDOI：10.4012/dmj.2018-088
Effect of airborne particle abrasion and sintering order on the surface roughness and shear bond strength between Y-TZP ceramic and resin cement.
来源期刊：Dental materials journalDOI：10.4012/dmj.2018-051
Effect of nonthermal atmospheric discharge on stain removal of tooth.
来源期刊：Dental materials journalDOI：10.4012/dmj.2018-025
Optical properties and flexural strength of translucent zirconia layered with high-translucent zirconia.
来源期刊：Dental materials journalDOI：10.4012/dmj.2018-157
Wear properties of esthetic dental materials against translucent zirconia.
来源期刊：Dental materials journalDOI：10.4012/dmj.2018-133
Five-axis laser milling system that realizes more accurate zirconia CAD/CAM crowns by direct milling from fully sintered blocks.
来源期刊：Dental materials journalDOI：10.4012/dmj.2017-443
Enhancement of dentin bond strength of resin cement using new resin coating materials.
来源期刊：Dental materials journalDOI：10.4012/dmj.2018-328
Surface wettability and nano roughness at different grit blasting operational pressures and their effects on resin cement to zirconia adhesion.
来源期刊：Dental materials journalDOI：10.4012/dmj.2018-137
Incorporation of a hydrophilic amide monomer into a one-step self-etch adhesive to increase dentin bond strength: Effect of application time.
来源期刊：Dental materials journalDOI：10.4012/dmj.2018-286
Ultrastructure and bonding properties of tribochemical silica-coated zirconia.
来源期刊：Dental materials journalDOI：10.4012/dmj.2017-397
Effects of pastes containing ion-releasing particles on dentin remineralization.
来源期刊：Dental materials journalDOI：10.4012/dmj.2018-015
Measurement of exothermic heat released during polymerization of a lightcuring composite resin: Comparison of light irradiation modes.
来源期刊：Dental materials journalDOI：10.4012/dmj.2018-158
Fracture toughness of experimental mica-based glass-ceramics and four commercial glass-ceramics restorative dental materials.
来源期刊：Dental materials journalDOI：10.4012/dmj.2018-077
Changes in the physical properties and color stability of aesthetic restorative materials caused by various beverages.
来源期刊：Dental materials journalDOI：10.4012/dmj.2017-247
Effects of newly-developed retrograde filling material on osteoblastic differentiation in vitro.
来源期刊：Dental materials journalDOI：10.4012/dmj.2018-124
Cavity adaptation of composite restorations prepared at crown and root: Optical assessment using SS-OCT.
来源期刊：Dental materials journalDOI：10.4012/dmj.2018-265
Investigation of a novel sterilization method for biofilms formed on titanium surfaces.
来源期刊：Dental materials journalDOI：10.4012/dmj.2018-274
Size effect of nano-hydroxyapatite on proliferation of odontoblast-like MDPC-23 cells.
来源期刊：Dental materials journalDOI：10.4012/dmj.2018-155
Application of hydroxyapatite nanoparticle-assembled powder using basic fibroblast growth factor as a pulp-capping agent.
来源期刊：Dental materials journalDOI：10.4012/dmj.2018-198
Repair bond strength of bulk-fill resin composite: Effect of different adhesive protocols.
来源期刊：Dental materials journalDOI：10.4012/dmj.2018-291
Hydrolytic degradation of different infiltrant compositions within different histological zones of enamel caries like-lesions.
来源期刊：Dental materials journalDOI：10.4012/dmj.2019-108
Time dependence of multi-ion absorption into human enamel from surface prereacted glass-ionomer (S-PRG) filler eluate.
来源期刊：Dental materials journalDOI：10.4012/dmj.2018-314
Chemical modification of pure titanium surfaces to enhance the cytocompatibility and differentiation of human mesenchymal stem cells.
来源期刊：Dental materials journalDOI：10.4012/dmj.2018-257
Bond strength of self-etching adhesives to dentin surface after smear layer removal with ultrasonic brushing.
来源期刊：Dental materials journalDOI：10.4012/dmj.2017-333
R.T.R® promotes bone marrow mesenchymal stem cells osteogenic differentiation by upregulating BMPs/SMAD induced cbfa1 expression.
来源期刊：Dental materials journalDOI：10.4012/dmj.2018-306
Influence of immediate dentin sealing and temporary restoration on the bonding of CAD/CAM ceramic crown restoration.
来源期刊：Dental materials journalDOI：10.4012/dmj.2018-313
The effect of curing mode of a high-power LED unit on bond strengths of dualcure resin cements to dentin and CAD/CAM resin blocks.
来源期刊：Dental materials journalDOI：10.4012/dmj.2018-344
Semi-interpenetrating network composites reinforced with Kevlar fibers for dental post fabrication.
来源期刊：Dental materials journalDOI：10.4012/dmj.2018-040
Selective laser melted titanium implants play a positive role in early osseointegration in type 2 diabetes mellitus rats.
来源期刊：Dental materials journalDOI：10.4012/dmj.2018-419
The repair bond strength to resin matrix in cured resin composites after water aging.
来源期刊：Dental materials journalDOI：10.4012/dmj.2018-044
Effect of artificial saliva on permeability of dentin treated with phosphate containing desensitizer measured by digital flow meter.
来源期刊：Dental materials journalDOI：10.4012/dmj.2018-134
Influence of different curing modes on flexural properties, fracture toughness, and wear behavior of dual-cure provisional resin-based composites.
来源期刊：Dental materials journalDOI：10.4012/dmj.2018-300
The accuracy of the prediction models for surface roughness and micro hardness of denture teeth.
来源期刊：Dental materials journalDOI：10.4012/dmj.2018-014
Effect of thermocycling on the amount of monomer released from bulk fill composite resins.
来源期刊：Dental materials journalDOI：10.4012/dmj.2018-377
Toughening of highly translucent zirconia by monoclinic ZrO2 and SiO2 particle coating.
来源期刊：Dental materials journalDOI：10.4012/dmj.2018-415
Influence of different surface finishing techniques on machinable feldspathic and leucite-reinforced ceramics.
来源期刊：Dental materials journalDOI：10.4012/dmj.2018-045
Effect of resin composite filler on digital imaging fiber-optic transillumination.
来源期刊：Dental materials journalDOI：10.4012/dmj.2018-264
The effect of disinfectants on the accuracy, quality and surface structure of impression materials and gypsum casts: A comparative study using light microscopy, scanning electron microscopy and micro computed tomography.
来源期刊：Dental materials journalDOI：10.4012/dmj.2019-065
The influence of resin composite with high fiber aspect ratio on fracture resistance of severely damaged bovine incisors.
来源期刊：Dental materials journalDOI：10.4012/dmj.2019-051
Effect of silane coupling treatment and airborne-particle abrasion on shear bond strength between photo-cured bulk-fill flowable composite resin and silverpalladium-copper-gold alloy using self-adhesive resin cement.
来源期刊：Dental materials journalDOI：10.4012/dmj.2018-121
The application of cellulose acetate replication sheets in enamel wear investigations.
来源期刊：Dental materials journalDOI：10.4012/dmj.2017-444
Effect of application of desensitizers before bleaching on change of tooth shade.
来源期刊：Dental materials journalDOI：10.4012/dmj.2018-129
Effect of kinematic viscosity on the staining performance of caries detector dyes.
来源期刊：Dental materials journalDOI：10.4012/dmj.2017-083
Effect of trifluoroethyl methacrylate comonomer on physical properties of Bis-GMA based dental composites.
来源期刊：Dental materials journalDOI：10.4012/dmj.2017-398
Effect of EDTA-treated dentin on the differentiation of mouse iPS cells into osteogenic/odontogenic lineages in vitro and in vivo.
来源期刊：Dental materials journalDOI：10.4012/dmj.2018-161
Anisotropic ultimate strength and microscopic fracture patterns during tensile testing in the dentin-enamel junction region.
来源期刊：Dental materials journalDOI：10.4012/dmj.2019-024
Proximal contact tightness of class Ⅱ bulk-fill composite resin restorations: An in vitro study.
来源期刊：Dental materials journalDOI：10.4012/dmj.2017-279
