Polymer Testing focuses on the testing, analysis and characterization of polymer materials, including both synthetic and natural or biobased polymers. Novel testing methods and the testing of novel polymeric materials in bulk, solution and dispersion is covered. In addition, we welcome the submission of the testing of polymeric materials for a wide range of applications and industrial products as well as nanoscale characterization.The scope includes but is not limited to the following main topics:Novel testing methods and Chemical analysis• mechanical, thermal, electrical, chemical, imaging, spectroscopy, scattering and rheologyPhysical properties and behaviour of novel polymer systems• nanoscale properties, morphology, transport propertiesDegradation and recycling of polymeric materials when combined with novel testing or characterization methods• degradation, biodegradation, ageing and fire retardancyModelling and Simulation work will be only considered when it is linked to new or previously published experimental results.
聚合物测试专注于聚合物材料的测试、分析和表征，包括合成和天然或生物基聚合物。新的测试方法和测试新的聚合物材料在散装，溶液和分散体是涵盖。此外，我们欢迎提交聚合物材料的测试，用于广泛的应用和工业产品，以及纳米表征。范围包括但不限于以下主要主题：新的测试方法和化学分析·机械，热，电，化学，成像，光谱，散射和流变学新的聚合物体系的物理性质和行为·纳米性能，形态学，输运性质当与新的测试或表征方法结合时，聚合物材料的降解和回收·降解，生物降解，老化和阻燃性建模和模拟工作将只考虑与新的或以前发表的实验结果有关。
The optimization of physico-mechanical properties of bionanocomposite films based on gluten/ carboxymethyl cellulose/ cellulose nanofiber using response surface methodology
来源期刊：Polymer TestingDOI：10.1016/J.POLYMERTESTING.2019.105989
Effect of silane coupling agents on properties and performance of polycarbonate/silica MMMs
来源期刊：Polymer TestingDOI：10.1016/J.POLYMERTESTING.2018.11.013
Morphology, rheology and curing of (ethylene-propylene elastomer/hydrogenate acrylonitrile-butadiene rubber) blends reinforced by POSS and organoclay
来源期刊：Polymer TestingDOI：10.1016/J.POLYMERTESTING.2019.01.020
Performance verification of elastomer materials in corrosive gas and liquid conditions
来源期刊：Polymer TestingDOI：10.1016/J.POLYMERTESTING.2019.01.015
A novel modification of carbon nanotubes for improving the electrical and mechanical properties of polyethylene composites
来源期刊：Polymer TestingDOI：10.1016/J.POLYMERTESTING.2018.12.018
Dynamic characterization of elastomer buffer under impact loading by low-velocity drop test method
来源期刊：Polymer TestingDOI：10.1016/J.POLYMERTESTING.2019.106013
Injection-molded parts of fully bio-based polyamide 1010 strengthened with waste derived slate fibers pretreated with glycidyl- and amino-silane coupling agents
来源期刊：Polymer TestingDOI：10.1016/J.POLYMERTESTING.2019.04.022
Effect of cold plasma treatment on Xanthan gum properties
来源期刊：Polymer TestingDOI：10.1016/J.POLYMERTESTING.2019.106056
An effective flame retardant containing hypophosphorous acid for poly (lactic acid): Fire performance, thermal stability and mechanical properties
来源期刊：Polymer TestingDOI：10.1016/J.POLYMERTESTING.2019.105940
Novel polyurethane with high self-healing efficiency for functional energetic composites
来源期刊：Polymer TestingDOI：10.1016/J.POLYMERTESTING.2019.03.014
Optimization of thermo-mechanical and antibacterial properties of epoxy/polyethylene glycol/MWCNTs nano-composites using response surface methodology and investigation thermal cycling fatigue
来源期刊：Polymer TestingDOI：10.1016/J.POLYMERTESTING.2019.105946
Dual-responsive copolymer hydrogel as broad-spectrum adsorbents for metal ions
来源期刊：Polymer TestingDOI：10.1016/J.POLYMERTESTING.2019.05.003
Effects of tartaric acid contents on phase homogeneity, morphology and properties of poly (butyleneadipate-co-terephthalate)/thermoplastic starch bio-composities
来源期刊：Polymer TestingDOI：10.1016/J.POLYMERTESTING.2019.04.005
Understanding the microstructural role of bio-sourced 3D printed structures on the tensile performance
来源期刊：Polymer TestingDOI：10.1016/J.POLYMERTESTING.2019.105924
Preparation of recycled polyethylene terephthalate composite foams and their feasible evaluation for electronic packages
来源期刊：Polymer TestingDOI：10.1016/J.POLYMERTESTING.2018.12.009
Effect of phenyl content, sample thickness and compression on damping performances of silicone rubber: A study by dynamic mechanical analysis and impact damping test
来源期刊：Polymer TestingDOI：10.1016/j.polymertesting.2019.106101
Investigation on the internal mechanism of the deviation between numerical simulation and experiments in injection molding product development
来源期刊：Polymer TestingDOI：10.1016/J.POLYMERTESTING.2019.02.028
Mechanical and microstructural characterization of flowing weld lines in injection-molded short fiber-reinforced PBT
来源期刊：Polymer TestingDOI：10.1016/J.POLYMERTESTING.2018.12.017
Fabrication of magnetic core shell particles coated with phenylalanine imprinted polymer
来源期刊：Polymer TestingDOI：10.1016/J.POLYMERTESTING.2019.02.023
Supramolecular luminescent triblock copolymer thermoplastic elastomer via metal-ligand coordination
来源期刊：Polymer TestingDOI：10.1016/J.POLYMERTESTING.2019.105956
Testing the applicability of LDPE/HNT composites for cable core insulation
来源期刊：Polymer TestingDOI：10.1016/J.POLYMERTESTING.2019.105993
Influence of the remnant magnetization, size distribution and content of soft magnetic reinforcement in micro-mechanical behavior of polymer matrix composites
来源期刊：Polymer TestingDOI：10.1016/J.POLYMERTESTING.2019.106020
The study of the thermomechanical degradation and mechanical properties of PET recycled by industrial-scale elongational processing
来源期刊：Polymer TestingDOI：10.1016/J.POLYMERTESTING.2019.04.029
Effect of the blending processes on selective localization and thermal conductivity of BN in PP/EPDM Co-continuous blends
来源期刊：Polymer TestingDOI：10.1016/J.POLYMERTESTING.2019.105978
Enhanced elastomer toughness and fracture properties imparted by chemically reactive flat nanoparticles
来源期刊：Polymer TestingDOI：10.1016/J.POLYMERTESTING.2019.105932
Experimental characterization of damage mechanisms of seamless net-shaped circular pre-form and overlapped stitched composite pipes
来源期刊：Polymer TestingDOI：10.1016/J.POLYMERTESTING.2019.105934
Influencing factors for vulcanization induction period of accelerator / natural rubber composites: Molecular simulation and experimental study
来源期刊：Polymer TestingDOI：10.1016/j.polymertesting.2019.106145
Optimizing creep lifetime of friction stir welded PMMA pipes subjected to combined loadings using rheological model
来源期刊：Polymer TestingDOI：10.1016/J.POLYMERTESTING.2019.106049
A comparative study of two graphene based elastomeric composite sensors
来源期刊：Polymer TestingDOI：10.1016/j.polymertesting.2019.106106
Hydrolytic degradation and lifetime prediction of poly(lactic acid) modified with a multifunctional epoxy-based chain extender
来源期刊：Polymer TestingDOI：10.1016/j.polymertesting.2019.106108
Melt compatibility between polyolefins: Evaluation and reliability of interfacial/surface tensions obtained by various techniques
来源期刊：Polymer TestingDOI：10.1016/J.POLYMERTESTING.2019.105995
Development and application of novel technique for characterising the cure shrinkage of epoxy resins
来源期刊：Polymer TestingDOI：10.1016/J.POLYMERTESTING.2018.11.045
Melt crystallization and thermal properties of graphene platelets (GNPs) modified recycled polyethylene terephthalate (RPET) composites: The filler network analysis
来源期刊：Polymer TestingDOI：10.1016/J.POLYMERTESTING.2019.04.016
Improvement of mechanical properties of silica/phenolic composites and abrasive tools by modification of filler using diazonium salt with hydroxymethyl groups
来源期刊：Polymer TestingDOI：10.1016/J.POLYMERTESTING.2019.03.006
Study on possible root causes of contamination from an incoming PVA brush during post-CMP cleaning
来源期刊：Polymer TestingDOI：10.1016/J.POLYMERTESTING.2019.105921
Simple shear response of a thin sheet of polytetrafluoroethylene under large deformations
来源期刊：Polymer TestingDOI：10.1016/J.POLYMERTESTING.2019.105942
A novel inhomogeneous deformation field model for cylindrical specimens for unconfined compression testing
来源期刊：Polymer TestingDOI：10.1016/J.POLYMERTESTING.2019.04.024
Process-dependent structural and deformation properties of extrusion blow molding parts
来源期刊：Polymer TestingDOI：10.1016/J.POLYMERTESTING.2019.105903
The effect of peroxide crosslinking on the synergistic crosslink of double bond and nitrile group of nitrile rubber in H2S environment
来源期刊：Polymer TestingDOI：10.1016/J.POLYMERTESTING.2019.03.026
J-integral evaluation of repaired cracks in AA7075-T6 structures subjected to uniaxial tensile stresses
来源期刊：Polymer TestingDOI：10.1016/J.POLYMERTESTING.2019.04.021
Dissipated energy density as fatigue criterion for non-relaxing tensional loadings of non-crystallizing elastomers?
来源期刊：Polymer TestingDOI：10.1016/J.POLYMERTESTING.2019.105953
Design of regulable chlorobutyl rubber damping materials with high-damping value for a wide temperature range
来源期刊：Polymer TestingDOI：10.1016/J.POLYMERTESTING.2019.106003
Gel point determination of a thermoset prepreg by means of rheology
来源期刊：Polymer TestingDOI：10.1016/J.POLYMERTESTING.2019.105950
Mechanical properties and antibacterial performance of PMMA toughened with acrylic rubber containing 2-hydroxypropyl-3-piperazinyl-quinoline carboxylic acid methacrylate (HPQM) and HPQM absorbed on TiO2 particles
来源期刊：Polymer TestingDOI：10.1016/J.POLYMERTESTING.2019.106023
Simple test method for determination of contribution level of crosslink density by crystalline structure of poly(ethylene-co-vinyl acetate) compound
来源期刊：Polymer TestingDOI：10.1016/J.POLYMERTESTING.2019.105928
An improved scheme for measuring 13C spin-lattice relaxation time: Targeting systems with marked difference in phase mobility or proton density
来源期刊：Polymer TestingDOI：10.1016/J.POLYMERTESTING.2019.105920
Construction of bi-layer biluminophore fast-responding pressure sensitive coating for non-contact unsteady aerodynamic testing
来源期刊：Polymer TestingDOI：10.1016/J.POLYMERTESTING.2019.105922
Magneto-elastic properties of isotropic MR elastomers with a tri-modal particle size distribution
来源期刊：Polymer TestingDOI：10.1016/j.polymertesting.2019.106105
Spectral selectivity and stability of energy-saving window films based on poly(vinyl chloride) reinforced with ATO nanoparticles
来源期刊：Polymer TestingDOI：10.1016/j.polymertesting.2019.106157
Evaluation of invitro degradation of commercially available breast implants
来源期刊：Polymer TestingDOI：10.1016/J.POLYMERTESTING.2019.106033
