Measurement Science and Technology publishes articles on new measurement techniques and associated instrumentation. Papers that describe experiments must represent an advance in measurement science or measurement technique rather than the application of established experimental technique. Bearing in mind the multidisciplinary nature of the journal, authors must provide an introduction to their work that makes clear the novelty, significance, broader relevance of their work in a measurement context and relevance to the readership of Measurement Science and Technology. All submitted articles should contain consideration of the uncertainty, precision and/or accuracy of the measurements presented.Subject coverage includes the theory, practice and application of measurement in physics, chemistry, engineering and the environmental and life sciences from inception to commercial exploitation. Publications in the journal should emphasize the novelty of reported methods, characterize them and demonstrate their performance using examples or applications.
《测量科学与技术》发表有关新测量技术和相关仪器的文章。描述实验的论文必须代表测量科学或测量技术的进步，而不是既定实验技术的应用。考虑到期刊的多学科性质，作者必须提供其工作的介绍，明确其工作在测量背景下的新奇性、重要性、广泛相关性以及与《测量科学与技术》读者群的相关性。所有提交的文章都应考虑所提出测量的不确定性、精确度和/或准确度。主题涵盖物理、化学、工程、环境和生命科学中测量的理论、实践和应用，从开始到商业开发。期刊中的出版物应强调所报道方法的新奇，对其进行表征，并通过实例或应用证明其性能。
A novel bearing fault diagnosis method based on 2D image representation and transfer learning-convolutional neural network
来源期刊：Measurement Science and TechnologyDOI：10.1088/1361-6501/AB0793
An optimal variational mode decomposition for rolling bearing fault feature extraction
来源期刊：Measurement Science and TechnologyDOI：10.1088/1361-6501/AB0352
A fault diagnosis method for rotating machinery based on improved variational mode decomposition and a hybrid artificial sheep algorithm
来源期刊：Measurement Science and TechnologyDOI：10.1088/1361-6501/AB0473
A time–frequency-based maximum correlated kurtosis deconvolution approach for detecting bearing faults under variable speed conditions
来源期刊：Measurement Science and TechnologyDOI：10.1088/1361-6501/AB3678
A mobile vision inspection system for tiny defect detection on smooth car-body surfaces based on deep ensemble learning
来源期刊：Measurement Science and TechnologyDOI：10.1088/1361-6501/AB1467
A robust and high-precision automatic reading algorithm of pointer meters based on machine vision
来源期刊：Measurement Science and TechnologyDOI：10.1088/1361-6501/AAED0A
Johnson noise thermometry
来源期刊：Measurement Science and TechnologyDOI：10.1088/1361-6501/AB3526
Contactless electrical impedance and ultrasonic tomography: Correlation, comparison and complementarity study
来源期刊：Measurement Science and TechnologyDOI：10.1088/1361-6501/AB2292
Improvement of image reconstruction in electrical capacitance tomography (ECT) by sectorial sensitivity matrix using a K-means clustering algorithm
来源期刊：Measurement Science and TechnologyDOI：10.1088/1361-6501/AB1022
Methods for characterization and optimisation of measuring performance of stereoscopic x-ray systems with image intensifiers
来源期刊：Measurement Science and TechnologyDOI：10.1088/1361-6501/AB23E7
Real-time high-dynamic-range fringe acquisition for 3D shape measurement with a RGB camera
来源期刊：Measurement Science and TechnologyDOI：10.1088/1361-6501/AB0CED
Bubble mapping: three-dimensional visualisation of gas-liquid flow regimes using electrical tomography
来源期刊：Measurement Science and TechnologyDOI：10.1088/1361-6501/AB06A9
On hypothesis testing in RAIM algorithms: generalized likelihood ratio test, solution separation test and a possible alternative
来源期刊：Measurement Science and TechnologyDOI：10.1088/1361-6501/AB1836
Defect detection techniques robust to process variation in semiconductor inspection
来源期刊：Measurement Science and TechnologyDOI：10.1088/1361-6501/AAFD77
Scattering referenced aerosol phosphor thermometry
来源期刊：Measurement Science and TechnologyDOI：10.1088/1361-6501/AB04CB
High-dynamic-range 3D shape measurement based on time domain superposition
来源期刊：Measurement Science and TechnologyDOI：10.1088/1361-6501/AB0D64
Compensation of volatile-distributed current due to variance of the unknown contact impedance in an electrical impedance tomography sensor
来源期刊：Measurement Science and TechnologyDOI：10.1088/1361-6501/AAFB22
Inter-system biases in GPS and BDS combined relative positioning by double-differenced observations
来源期刊：Measurement Science and TechnologyDOI：10.1088/1361-6501/AB1CB0
Spatial averaging effects on the streamwise and wall-normal velocity measurements in a wall-bounded turbulence using a cross-wire probe
来源期刊：Measurement Science and TechnologyDOI：10.1088/1361-6501/AB2587
A direct comparison between conventional and plenoptic background oriented schlieren imaging
来源期刊：Measurement Science and TechnologyDOI：10.1088/1361-6501/AB1837
Void fraction measurement using an imaging and phase isolation method in horizontal annular flow
来源期刊：Measurement Science and TechnologyDOI：10.1088/1361-6501/AAF8EC
Design and performance of a test rig for evaluation of nanopositioning stages
来源期刊：Measurement Science and TechnologyDOI：10.1088/1361-6501/AAFD03
High-efficiency sorting and measurement of orbital angular momentum modes based on the March–Zehnder interferometer and complex phase gratings
来源期刊：Measurement Science and TechnologyDOI：10.1088/1361-6501/AB0E62
Traceable calibration of microphones at low frequencies
来源期刊：Measurement Science and TechnologyDOI：10.1088/1361-6501/AB01A6
Flame temperature reconstruction through a multi-plenoptic camera technique
来源期刊：Measurement Science and TechnologyDOI：10.1088/1361-6501/AB2E98
A delayed gating approach for interference-free ratio-based phosphor thermometry
来源期刊：Measurement Science and TechnologyDOI：10.1088/1361-6501/AB1B0C
Pressure effect on phosphor thermometry using Mg4FGeO6:Mn
来源期刊：Measurement Science and TechnologyDOI：10.1088/1361-6501/AAF618
An experimental apparatus to measure soot morphology at high pressures using multi-angle light scattering
来源期刊：Measurement Science and TechnologyDOI：10.1088/1361-6501/AB1C3F
Wireless passive sensor based on microstrip antenna for metal crack detection and characterization
来源期刊：Measurement Science and TechnologyDOI：10.1088/1361-6501/AB068A
Instrumented platform for assessment of isometric hand muscles contractions
来源期刊：Measurement Science and TechnologyDOI：10.1088/1361-6501/AB0EAE
Application of Bayesian model averaging to the determination of thermal expansion of single-crystal silicon
来源期刊：Measurement Science and TechnologyDOI：10.1088/1361-6501/AB094B
Mesh-based computation for solving bas-relief reconstruction from editable normal image
来源期刊：Measurement Science and TechnologyDOI：10.1088/1361-6501/AB02D1
An adaptive model recognition and construction method for RSSI fingerprint-based localization
来源期刊：Measurement Science and TechnologyDOI：10.1088/1361-6501/AB285F
A machine vision system for automatic sieve calibration
来源期刊：Measurement Science and TechnologyDOI：10.1088/1361-6501/AB37C0
Reliable real-time triple-frequency cycle slip detection and recovery with adaptive detection thresholds
来源期刊：Measurement Science and TechnologyDOI：10.1088/1361-6501/AB0357
Improving the probing depth of thermographic inspections of polymer composite materials
来源期刊：Measurement Science and TechnologyDOI：10.1088/1361-6501/AAED15
Precision roll angle measurement based on digital speckle pattern interferometry
来源期刊：Measurement Science and TechnologyDOI：10.1088/1361-6501/AB026A
Multimodal imaging of multiphase flows with electromagnetic flow tomography and electrical tomography
来源期刊：Measurement Science and TechnologyDOI：10.1088/1361-6501/AB1EF7
Increasing throughput in X-ray computed tomography measurement of surface topography using sinogram interpolation
来源期刊：Measurement Science and TechnologyDOI：10.1088/1361-6501/AB37E5
Distributed least-squares estimation applied to GNSS networks
来源期刊：Measurement Science and TechnologyDOI：10.1088/1361-6501/AB034E
An adaptive sampling methodology for measuring blades with CMM based on dominant feature points
来源期刊：Measurement Science and TechnologyDOI：10.1088/1361-6501/AB019D
A novel circular points-based self-calibration method for a camera’s intrinsic parameters using RANSAC
来源期刊：Measurement Science and TechnologyDOI：10.1088/1361-6501/AB09C0
A hybrid improved moth-flame optimization with differential evolution with global and local neighborhoods algorithm for pose optimization on a space manipulator
来源期刊：Measurement Science and TechnologyDOI：10.1088/1361-6501/AB2FA6
Automatic seepage detection in cable tunnels using infrared thermography
来源期刊：Measurement Science and TechnologyDOI：10.1088/1361-6501/AB30D9
Sparse-view CT reconstruction based on gradient directional total variation
来源期刊：Measurement Science and TechnologyDOI：10.1088/1361-6501/AB09C6
Optical detection in magnetic state-selection Cs beam tubes for transportable Cs beam clocks
来源期刊：Measurement Science and TechnologyDOI：10.1088/1361-6501/AB11AF
A simple and reliable, optical all-fibre, data acquisition trigger signal for fibre-laser asynchronous optical sampling systems
来源期刊：Measurement Science and TechnologyDOI：10.1088/1361-6501/AB0BFC
Dual-station intelligent welding robot system based on CCD
来源期刊：Measurement Science and TechnologyDOI：10.1088/1361-6501/AB02D7
Development of a miniaturized spectrum-type plasma wave receiver comprising an application-specific integrated circuit analog front end and a field-programmable gate array
来源期刊：Measurement Science and TechnologyDOI：10.1088/1361-6501/AB0821
Singular spectrum analysis filtering and Fourier inversion: an efficient and fast way to improve resolution and quality of current density maps with low-cost Hall scanning systems
来源期刊：Measurement Science and TechnologyDOI：10.1088/1361-6501/AAF13A
