Materials and Manufacturing Processes deals with issues that result in better utilization of raw materials and energy, integration of design and manufacturing activities requiring the invention of suitable new manufacturing processes and techniques, unmanned production dependent on efficient and reliable control of various processes including intelligent processing, introduction of new materials in industrial production necessitating new manufacturing process technology, and more. Information is offered in various formats, including research articles, letter reports, review articles, conference papers, applied research, book and conference reviews, and entire issues devoted to symposia.All submitted manuscripts are subject to initial appraisal by the Editors, and, if found suitable for further consideration, to peer review by independent, anonymous expert referees. All peer review is single blind and submission is online via ScholarOne Manuscripts.
材料和制造工艺处理的问题导致更好地利用原材料和能源，集成设计和制造活动需要发明合适的新制造工艺和技术，无人生产依赖于各种工艺的有效和可靠的控制，包括智能处理，在工业生产中引入新材料需要新的制造工艺技术，等等。信息以各种形式提供，包括研究文章、信函报告、综述文章、会议论文、应用研究、书籍和会议综述，以及专门讨论专题的整期。所有提交的手稿都要经过编辑的初步评估，如果认为适合进一步考虑，则要经过独立的匿名专家评审。所有同行评审均为单盲评审，并通过ScholarOne Manuscripts在线提交。
Activated flux TIG welding of Inconel 718 super alloy in presence of tri-component flux
来源期刊：Materials and Manufacturing ProcessesDOI：10.1080/10426914.2018.1532581
Effect of tool rotation in near-dry EDM process on machining characteristics of HSS
来源期刊：Materials and Manufacturing ProcessesDOI：10.1080/10426914.2019.1605171
EDM of Ti-6Al-4V: Electrode and polarity selection for minimum tool wear rate and overcut
来源期刊：Materials and Manufacturing ProcessesDOI：10.1080/10426914.2019.1594278
Experimental investigations into triplex hybrid process of GA-RDECDM during subtractive processing of MMC’s
来源期刊：Materials and Manufacturing ProcessesDOI：10.1080/10426914.2018.1512126
Experimental investigation of dry, wet and cryogenic boring of AA 7075 alloy
来源期刊：Materials and Manufacturing ProcessesDOI：10.1080/10426914.2019.1605174
A comprehensive study on surface integrity of nickel-based superalloy Inconel 718 under robotic belt grinding
来源期刊：Materials and Manufacturing ProcessesDOI：10.1080/10426914.2018.1512137
Joining of metal matrix composites using friction stir welding: a review
来源期刊：Materials and Manufacturing ProcessesDOI：10.1080/10426914.2018.1532094
In-process thermal treatment of polylactic acid in fused deposition modelling
来源期刊：Materials and Manufacturing ProcessesDOI：10.1080/10426914.2019.1566611
Temperature and pressure evolution in fast heat cycle injection molding
来源期刊：Materials and Manufacturing ProcessesDOI：10.1080/10426914.2018.1512120
Neural-fuzzy optimization of thick composites curing process
来源期刊：Materials and Manufacturing ProcessesDOI：10.1080/10426914.2018.1512116
Influence of materials and machining parameters on WEDM of Al/AlCoCrFeNiMo0.5 MMC
来源期刊：Materials and Manufacturing ProcessesDOI：10.1080/10426914.2019.1594250
Performance enhancement of rotary tool near-dry EDM of HSS by supplying oxygen gas in the dielectric medium
来源期刊：Materials and Manufacturing ProcessesDOI：10.1080/10426914.2019.1675889
Effects of process parameters on the quality aspects of weld-bead in laser welding of NiTinol sheets
来源期刊：Materials and Manufacturing ProcessesDOI：10.1080/10426914.2019.1566608
Enhancing corrosion resistance of Al-Cu/AZ31 composites synthesized by a laser cladding and FSP hybrid method
来源期刊：Materials and Manufacturing ProcessesDOI：10.1080/10426914.2019.1661432
Experimental study of the influence of the process parameters in the milling of Al6082-T6 alloy
来源期刊：Materials and Manufacturing ProcessesDOI：10.1080/10426914.2019.1594271
Effect of cryogenic CO2 and LN2 coolants in milling of aluminum alloy
来源期刊：Materials and Manufacturing ProcessesDOI：10.1080/10426914.2018.1532591
Laser cladding composite coatings by Ni–Cr–Ti–B4C with different process parameters
来源期刊：Materials and Manufacturing ProcessesDOI：10.1080/10426914.2019.1605172
Investigation of friction stir processing effect on AA 2014-T6
来源期刊：Materials and Manufacturing ProcessesDOI：10.1080/10426914.2018.1532577
Investigation on EDM machining of Ti6Al4V with negative polarity brass electrode
来源期刊：Materials and Manufacturing ProcessesDOI：10.1080/10426914.2019.1675891
Development of an intelligent model to optimize heat-affected zone, kerf, and roughness in 309 stainless steel plasma cutting by using experimental results
来源期刊：Materials and Manufacturing ProcessesDOI：10.1080/10426914.2018.1532579
Effect of heat-input and cooling-time on bead characteristics in SAW
来源期刊：Materials and Manufacturing ProcessesDOI：10.1080/10426914.2018.1532578
Surface and porous recast layer analysis in µ-EDM of MWCNT-Al2O3 composites
来源期刊：Materials and Manufacturing ProcessesDOI：10.1080/10426914.2019.1566617
Comparative study of activated flux-GTAW and multipass-GTAW dissimilar P92 steel-304H ASS joints
来源期刊：Materials and Manufacturing ProcessesDOI：10.1080/10426914.2019.1605175
Experimental investigation on temperature-affected magnetic abrasive finishing of aluminum 6060
来源期刊：Materials and Manufacturing ProcessesDOI：10.1080/10426914.2019.1628263
Processing of Al/Cu bimetal via a novel compound casting method
来源期刊：Materials and Manufacturing ProcessesDOI：10.1080/10426914.2019.1615084
Optimization of GTAW Al 3003 weld using fabricated nanocomposite filler metal
来源期刊：Materials and Manufacturing ProcessesDOI：10.1080/10426914.2018.1532585
Effect of varying weld speed on corrosion resistance and mechanical behavior of Aluminium - steel welds fabricated by cold metal transfer technique
来源期刊：Materials and Manufacturing ProcessesDOI：10.1080/10426914.2019.1605180
Processing of heat-treated silicon carbide-reinforced aluminum alloy composites
来源期刊：Materials and Manufacturing ProcessesDOI：10.1080/10426914.2018.1544708
Influence of carbide reinforcements on accumulative roll bonded Al 8011 composites
来源期刊：Materials and Manufacturing ProcessesDOI：10.1080/10426914.2019.1594279
Influence of cutting conditions on surface characteristics in micro-milling of Ti-6Al-7Nb alloy
来源期刊：Materials and Manufacturing ProcessesDOI：10.1080/10426914.2019.1669803
Highly reliable mulberry paper (Hanji)-based electrode with printed silver nanowire/zinc oxide hybrid for soft electronics
来源期刊：Materials and Manufacturing ProcessesDOI：10.1080/10426914.2019.1594266
Machinability analysis and application of response surface approach on CNC turning of LM6/SiCp composites
来源期刊：Materials and Manufacturing ProcessesDOI：10.1080/10426914.2019.1660787
Laser cladding Ni-Ti-Cr alloy coatings with different process parameters
来源期刊：Materials and Manufacturing ProcessesDOI：10.1080/10426914.2019.1686521
Three-dimensional printing of tungsten structures by directed energy deposition
来源期刊：Materials and Manufacturing ProcessesDOI：10.1080/10426914.2019.1594253
Surface integrity analysis of Nitinol-60 shape memory alloy in WEDM
来源期刊：Materials and Manufacturing ProcessesDOI：10.1080/10426914.2019.1628256
Experimental investigation on ultrasonic spot welding of aluminum-cupronickel sheets under different parametric conditions
来源期刊：Materials and Manufacturing ProcessesDOI：10.1080/10426914.2019.1689265
Binder force effect on stretch flange forming of aluminum alloy
来源期刊：Materials and Manufacturing ProcessesDOI：10.1080/10426914.2019.1655154
Experimental investigation of IN725 under different cooling environments using new tool holder
来源期刊：Materials and Manufacturing ProcessesDOI：10.1080/10426914.2018.1532583
Examinations concerning the electric discharge machining of AZ91/5B4CP composites utilizing distinctive electrode materials
来源期刊：Materials and Manufacturing ProcessesDOI：10.1080/10426914.2019.1628258
Investigations on power consumption in WEDM of EN31 steel for sustainable production
来源期刊：Materials and Manufacturing ProcessesDOI：10.1080/10426914.2019.1683577
Shrinkage compensation approach proposed for ABS material in FDM process
来源期刊：Materials and Manufacturing ProcessesDOI：10.1080/10426914.2019.1594252
Experimental and numerical study on the influence of process parameters in electromagnetic compression of AA6061 tube
来源期刊：Materials and Manufacturing ProcessesDOI：10.1080/10426914.2019.1655156
Investigation on tool wear process of milling wave-transmitting Si3N4 ceramics
来源期刊：Materials and Manufacturing ProcessesDOI：10.1080/10426914.2019.1566620
Manufacture of a hydrophobic CaO/polylactic acid composite
来源期刊：Materials and Manufacturing ProcessesDOI：10.1080/10426914.2018.1512113
Development and performance analysis of semi-automatic movement setup for planar welding
来源期刊：Materials and Manufacturing ProcessesDOI：10.1080/10426914.2019.1643470
Laser technique in diaphragm cum rupture disc for defence oriented silver oxide zinc reserve batteries
来源期刊：Materials and Manufacturing ProcessesDOI：10.1080/10426914.2018.1512133
Fabrication of freestanding SiO2-TiO2 composite by a facile one pot method
来源期刊：Materials and Manufacturing ProcessesDOI：10.1080/10426914.2018.1532090
Micro-forming analysis of ultra-thin brass foil
来源期刊：Materials and Manufacturing ProcessesDOI：10.1080/10426914.2019.1655158
Synthesis of silica microspheres on silicon-modified carbon foams under ablation
来源期刊：Materials and Manufacturing ProcessesDOI：10.1080/10426914.2018.1544715
