Composites Part A: Applied Science and Manufacturing publishes original research papers, review articles, case studies, short communications and letters from a wide variety of sources dealing with all aspects of the science and technology of composite materials, including fibrous and particulate reinforcements in polymeric, metallic and ceramic matrices, and 'natural' composites such as wood and biological materials. The range of applicable topics includes the properties, design and manufacture of reinforcing fibers and particles, novel architectures and concepts, multifunctional composites, advances in fabrication and processing of composite materials and structures, manufacturing science, process modelling, experimental mechanics, microstructural characterization of composites and their constituent phases, interfaces in composites, new approaches to prediction and measurement of mechanical, physical and chemical behaviour, and performance of composites in service. Articles are also welcomed on economic and commercial aspects of the applications of composites, design with composites and case studies. All articles are subject to rigorous peer review to ensure they make an important and novel contribution, and a high standard is set for both content and presentation. The Editors aim to conduct the review procedure with the minimum of delay so that prompt publication ensues.
复合材料A部分：应用科学与制造出版原创研究论文、评论文章、案例研究、简短通讯和信件，涉及复合材料科学和技术的各个方面，包括聚合物、金属和陶瓷基质中的纤维和颗粒增强材料，以及木材和生物材料等"天然"复合材料。可应用的课题包括增强纤维和增强颗粒的性能、设计和制造、新的结构和概念、多功能复合材料、复合材料和结构的制造和加工进展、制造科学、过程模拟、实验力学、复合材料及其组成相的微观结构表征、复合材料界面、预测和测量力学性能的新方法，物理和化学行为以及复合材料在使用中的性能。文章也欢迎经济和商业方面的应用复合材料，设计与复合材料和案例研究。所有的文章都经过严格的同行评审，以确保它们做出重要和新颖的贡献，并为内容和呈现设置了高标准。编辑们的目标是在最短的时间内进行审查程序，以便迅速出版。
Highly sensitive wearable 3D piezoresistive pressure sensors based on graphene coated isotropic non-woven substrate
来源期刊：Composites Part A-applied Science and ManufacturingDOI：10.1016/J.COMPOSITESA.2018.11.023
Mechanical and electrical properties of graphene and carbon nanotube reinforced epoxy adhesives: Experimental and numerical analysis
来源期刊：Composites Part A-applied Science and ManufacturingDOI：10.1016/J.COMPOSITESA.2019.02.027
Flexible thermoplastic polyurethane/reduced graphene oxide composite foams for electromagnetic interference shielding with high absorption characteristic
来源期刊：Composites Part A-applied Science and ManufacturingDOI：10.1016/J.COMPOSITESA.2019.05.017
Synthesis of a novel multi-structure synergistic POSS-GO-DOPO ternary graft flame retardant and its application in polypropylene
来源期刊：Composites Part A-applied Science and ManufacturingDOI：10.1016/J.COMPOSITESA.2018.12.006
Impact of delignification on morphological, optical and mechanical properties of transparent wood
来源期刊：Composites Part A-applied Science and ManufacturingDOI：10.1016/J.COMPOSITESA.2018.12.004
Bending shape recovery of unidirectional carbon fiber reinforced epoxy-based shape memory polymer composites
来源期刊：Composites Part A-applied Science and ManufacturingDOI：10.1016/J.COMPOSITESA.2018.10.037
Effect of carbon nanofiller dimension on synergistic EMI shielding network of epoxy/metal conductive foams
来源期刊：Composites Part A-applied Science and ManufacturingDOI：10.1016/J.COMPOSITESA.2018.12.016
Study on the performance of different nano-species used for surface modification of carbon fiber for interface strengthening
来源期刊：Composites Part A-applied Science and ManufacturingDOI：10.1016/J.COMPOSITESA.2019.105509
Exploiting the piezoresistivity and EMI shielding of polyetherimide/carbon nanotube foams by tailoring their porous morphology and segregated CNT networks
来源期刊：Composites Part A-applied Science and ManufacturingDOI：10.1016/J.COMPOSITESA.2019.05.031
Optimization of the amount of short glass fibers for superior wear performance of PAEK composites
来源期刊：Composites Part A-applied Science and ManufacturingDOI：10.1016/J.COMPOSITESA.2018.10.034
High-performance electromagnetic wave absorption by designing the multilayer graphene/thermoplastic polyurethane porous composites with gradient foam ratio structure
来源期刊：Composites Part A-applied Science and ManufacturingDOI：10.1016/J.COMPOSITESA.2019.105522
High performance POSS filled nanocomposites prepared via UV-curing based on 3D stereolithography printing
来源期刊：Composites Part A-applied Science and ManufacturingDOI：10.1016/J.COMPOSITESA.2018.11.024
CNT/STF/Kevlar-based wearable electronic textile with excellent anti-impact and sensing performance
来源期刊：Composites Part A-applied Science and ManufacturingDOI：10.1016/j.compositesa.2019.105612
Fracture behavior of cement mortar reinforced by hybrid composite fiber consisting of CaCO3 whiskers and PVA-steel hybrid fibers
来源期刊：Composites Part A-applied Science and ManufacturingDOI：10.1016/J.COMPOSITESA.2019.03.002
Separated 3D printing of continuous carbon fiber reinforced thermoplastic polyimide
来源期刊：Composites Part A-applied Science and ManufacturingDOI：10.1016/J.COMPOSITESA.2019.04.002
Role of structural parameters on strength-ductility combination of laminated carbon nanotubes/copper composites
来源期刊：Composites Part A-applied Science and ManufacturingDOI：10.1016/J.COMPOSITESA.2018.10.021
Enhanced lightning strike protection of carbon fiber composites using expanded foils with anisotropic electrical conductivity
来源期刊：Composites Part A-applied Science and ManufacturingDOI：10.1016/J.COMPOSITESA.2018.11.022
Fabrication of PLA/CNC/CNT conductive composites for high electromagnetic interference shielding based on Pickering emulsions method
来源期刊：Composites Part A-applied Science and ManufacturingDOI：10.1016/J.COMPOSITESA.2019.105558
Tensile Properties of a Stochastic Prepreg Platelet Molded Composite
来源期刊：Composites Part A-applied Science and ManufacturingDOI：10.1016/J.COMPOSITESA.2019.105507
Biofabrication of a novel bacteria/bacterial cellulose composite for improved adsorption capacity
来源期刊：Composites Part A-applied Science and ManufacturingDOI：10.1016/J.COMPOSITESA.2019.105560
Preparation of CFRP with modified MWCNT to improve the mechanical properties and torsional fatigue of epoxy/polybenzoxazine copolymer
来源期刊：Composites Part A-applied Science and ManufacturingDOI：10.1016/J.COMPOSITESA.2018.11.026
Flexible cellulose nanofibril/pristine graphene nanocomposite films with high electrical conductivity
来源期刊：Composites Part A-applied Science and ManufacturingDOI：10.1016/J.COMPOSITESA.2019.01.029
Pectin-assisted dispersion of exfoliated boron nitride nanosheets for assembled bio-composite aerogels
来源期刊：Composites Part A-applied Science and ManufacturingDOI：10.1016/J.COMPOSITESA.2019.02.003
Integrated effect of flame retardant wrapped macromolecular covalent organic nanosheet on reduction of fire hazards of epoxy resin
来源期刊：Composites Part A-applied Science and ManufacturingDOI：10.1016/J.COMPOSITESA.2018.11.005
Mechanical properties and failure mechanisms at high temperature in carbon nanotube reinforced copper matrix nanolaminated composite
来源期刊：Composites Part A-applied Science and ManufacturingDOI：10.1016/J.COMPOSITESA.2018.10.022
Hierarchical mode I and mode II interlaminar toughening of Z-pinned composites using 1D and 2D carbon nanofillers
来源期刊：Composites Part A-applied Science and ManufacturingDOI：10.1016/J.COMPOSITESA.2019.05.038
Manufacture of carbon-fiber prepreg with thermoplastic/epoxy resin blends and microencapsulated solvent healing agents
来源期刊：Composites Part A-applied Science and ManufacturingDOI：10.1016/J.COMPOSITESA.2019.03.033
Enhancing CF/PEEK composites by CF decoration with polyimide and loosely-packed CNT arrays
来源期刊：Composites Part A-applied Science and ManufacturingDOI：10.1016/j.compositesa.2019.105613
Determining tab material for tensile test of CFRP laminates with combined usage of digital image correlation and acoustic emission techniques
来源期刊：Composites Part A-applied Science and ManufacturingDOI：10.1016/j.compositesa.2019.105623
Numerical optimisation of thermoset composites manufacturing processes: A review
来源期刊：Composites Part A-applied Science and ManufacturingDOI：10.1016/J.COMPOSITESA.2019.105499
Interaction of process parameters and material properties with regard to prepreg tack in automated lay-up and draping processes
来源期刊：Composites Part A-applied Science and ManufacturingDOI：10.1016/J.COMPOSITESA.2018.12.001
Enhancement of thermal conductivity of carbon fiber-reinforced polymer composite with copper and boron nitride particles
来源期刊：Composites Part A-applied Science and ManufacturingDOI：10.1016/J.COMPOSITESA.2019.03.030
An objective comparison of common vacuum assisted resin infusion processes
来源期刊：Composites Part A-applied Science and ManufacturingDOI：10.1016/J.COMPOSITESA.2019.105528
Sizing effects on the interfacial shear strength of a carbon fibre reinforced two-component thermoplastic polymer
来源期刊：Composites Part A-applied Science and ManufacturingDOI：10.1016/j.compositesa.2019.105622
Fiber-welded ciliated-like nonwoven fabric nano-composite multiscale architectures for superior mechanical and electromagnetic shielding behaviors
来源期刊：Composites Part A-applied Science and ManufacturingDOI：10.1016/J.COMPOSITESA.2019.03.043
High thermal conductive and fire retarded film based on phosphaphenanthrene functionalized graphene
来源期刊：Composites Part A-applied Science and ManufacturingDOI：10.1016/J.COMPOSITESA.2018.10.017
Improvement of ablation resistance of epoxy composites reinforced with low concentrations of multi walled carbon nanotubes
来源期刊：Composites Part A-applied Science and ManufacturingDOI：10.1016/J.COMPOSITESA.2019.105471
Characterisation of crystallinity at the interface of ultrasonically welded carbon fibre PPS joints
来源期刊：Composites Part A-applied Science and ManufacturingDOI：10.1016/J.COMPOSITESA.2019.105574
Poly(lactic acid) composites reinforced with kraft pulp fibres: Production by a papermaking process and characterisation
来源期刊：Composites Part A-applied Science and ManufacturingDOI：10.1016/J.COMPOSITESA.2019.03.024
Development of Blown Polylactic acid-MgO Nanocomposite Films for Food Packaging
来源期刊：Composites Part A-applied Science and ManufacturingDOI：10.1016/J.COMPOSITESA.2019.105482
ZnO nanoparticles-tailored GO dispersion toward flexible dielectric composites with high relative permittivity, low dielectric loss and high breakdown strength
来源期刊：Composites Part A-applied Science and ManufacturingDOI：10.1016/J.COMPOSITESA.2019.105489
Effect of needle punching on flexural behavior of carbon fiber-reinforced thermoplastic sandwich panel with spring-backed core
来源期刊：Composites Part A-applied Science and ManufacturingDOI：10.1016/J.COMPOSITESA.2018.12.013
Determination of interfacial shear strength in continuous fibre composites by multi-fibre fragmentation: A review
来源期刊：Composites Part A-applied Science and ManufacturingDOI：10.1016/J.COMPOSITESA.2019.01.001
A general strength model for fiber bundle composites under transverse tension or interlaminar shear
来源期刊：Composites Part A-applied Science and ManufacturingDOI：10.1016/J.COMPOSITESA.2019.03.009
Construction of gradient structure in polyetherimide/carbon nanotube nanocomposite foam and its thermal/mechanical property
来源期刊：Composites Part A-applied Science and ManufacturingDOI：10.1016/J.COMPOSITESA.2019.105579
Characterizing the wrinkling behavior of woven engineering fabrics with local non-uniformity
来源期刊：Composites Part A-applied Science and ManufacturingDOI：10.1016/J.COMPOSITESA.2018.12.010
Experimental study on the influence of cyclic compaction on the fiber-bed permeability, quasi-static and dynamic compaction responses
来源期刊：Composites Part A-applied Science and ManufacturingDOI：10.1016/J.COMPOSITESA.2019.105559
Utilization of the textile reinforcements of fiber reinforced plastics as sensor for condition monitoring
来源期刊：Composites Part A-applied Science and ManufacturingDOI：10.1016/J.COMPOSITESA.2019.105603
In-situ measurement of tension and contact forces for weaving process monitoring: Application to 3D interlock
来源期刊：Composites Part A-applied Science and ManufacturingDOI：10.1016/J.COMPOSITESA.2019.105604
A damage-induced short-circuit diffusion model applied to the oxidation calculation of ceramic matrix composites (CMCs)
来源期刊：Composites Part A-applied Science and ManufacturingDOI：10.1016/j.compositesa.2019.105621
