International Polymer Processing offers original research contributions, invited review papers and recent technological developments in processing thermoplastics, thermosets, elastomers and fibers as well as polymer reaction engineering. For more than 25 years International Polymer Processing, the journal of the Polymer Processing Society, provides strictly peer-reviewed, high-quality articles and rapid communications from the leading experts around the world.
国际聚合物加工提供原创研究贡献，邀请评论论文和最新的技术发展，在加工热塑性塑料，热固性塑料，弹性体和纤维以及聚合物反应工程。聚合物加工学会的期刊《国际聚合物加工》25年来提供严格的同行评审、高质量的文章和来自世界各地领先专家的快速交流。
Edge Effect in Hot Embossing and its Influence on Global Pattern Replication of Polymer-Based Microneedles
来源期刊：International Polymer ProcessingDOI：10.3139/217.3726
Global Modeling of Single Screw Extrusion with Slip Effects
来源期刊：International Polymer ProcessingDOI：10.3139/217.3653
Flow-Fiber Coupled Viscosity in Injection Molding Simulations of Short Fiber Reinforced Thermoplastics
来源期刊：International Polymer ProcessingDOI：10.3139/217.3706
Enhancement of Injection Molding Consistency by Adjusting Velocity/Pressure Switching Time Based on Clamping Force
来源期刊：International Polymer ProcessingDOI：10.3139/217.3867
Mechanical and Thermal Properties of Teak Wood Flour/Starch Filled High Density Polyethylene Composites
来源期刊：International Polymer ProcessingDOI：10.3139/217.3640
Structural and Optical Characteristics of Laser Irradiated CdSe/PVA Nanocomposites
来源期刊：International Polymer ProcessingDOI：10.3139/217.3729
Study of Rheology and Plug Assist Thermoforming of Linear and Branched PP Homopolymer and Impact Copolymer
来源期刊：International Polymer ProcessingDOI：10.3139/217.3704
Study of Bonding Formation between the Filaments of PLA in FFF Process
来源期刊：International Polymer ProcessingDOI：10.3139/217.3718
Influence of Ultrasonic Transducer Structural Parameters on the Frictional Plasticizing Heat Generation of Polymer Particles
来源期刊：International Polymer ProcessingDOI：10.3139/217.3671
On Induced Properties and Self Heating during Free Blowing of PET Preform
来源期刊：International Polymer ProcessingDOI：10.3139/217.3759
Thermomechanical Degradation of Polyetherimide (PEI) by Friction-Based Joining and the Effects on Quasi-Static Mechanical Strength of Hybrid Joints
来源期刊：International Polymer ProcessingDOI：10.3139/217.3679
Damping, Thermal and Mechanical Analyses of Polycarbonate/Cerium Oxide Composites for Structural Applications
来源期刊：International Polymer ProcessingDOI：10.3139/217.3723
Optimization of Injection Stretch Blow Molding: Part I – Defining Part Thickness Profile
来源期刊：International Polymer ProcessingDOI：10.3139/217.3746
Effects of Cooling Ways on the Structure of Polypropylene Hollow Fiber Membranes Prepared by Stretching
来源期刊：International Polymer ProcessingDOI：10.3139/217.3638
Research on Influencing Factors of the Thermal Contact Resistance in Thin-Wall Injection Molding
来源期刊：International Polymer ProcessingDOI：10.3139/217.3617
Fill Factor Effects in Highly-Viscous Non-Isothermal Rubber Mixing Simulations
来源期刊：International Polymer ProcessingDOI：10.3139/217.3694
Identifying Melt Processing Conditions for a Polyacrylonitrile Copolymer Plasticized with Water, Acetonitrile and their Mixtures
来源期刊：International Polymer ProcessingDOI：10.3139/217.3750
Morphology and Isothermal Crystallization Kinetics of Polypropylene/Poly(ethylene-co-vinyl alcohol) Blends
来源期刊：International Polymer ProcessingDOI：10.3139/217.3589
Kinetic Analysis on Thermal Decomposition of Poly(lactic acid) Toughened by Calcium Sulfate Whiskers
来源期刊：International Polymer ProcessingDOI：10.3139/217.3611
Micro-Residual Stress Measurement in Nanocomposite Reinforced Polymers
来源期刊：International Polymer ProcessingDOI：10.3139/217.3756
Flame Retardancy Effects on Intumescent Coatings with Vinyl Acetate Copolymers
来源期刊：International Polymer ProcessingDOI：10.3139/217.3811
Study on Influence of Co-Injection Molding Process on Self-Reinforcing Characteristics of Self-Reinforced Polypropylene Composite via Visualization
来源期刊：International Polymer ProcessingDOI：10.3139/217.3773
Characterization of Anisotropic Properties of Hot Compacted Self-Reinforced Composites (SRCs) via Thermal Diffusivity Measurement
来源期刊：International Polymer ProcessingDOI：10.3139/217.3812
Effects of Zinc Borate on the Flame Retardancy Performance of Aluminum Diethylphosphinate in Polyamide-6 and its Composites
来源期刊：International Polymer ProcessingDOI：10.3139/217.3579
Rheology and Extrusion Foaming of Partially Crosslinked Thermoplastic Vulcanizates Silicone
来源期刊：International Polymer ProcessingDOI：10.3139/217.3741
Preparation and Characterization of Hydrophobic Flat Sheet Membranes Based on a Recycled Polymer
来源期刊：International Polymer ProcessingDOI：10.3139/217.3717
Mechanical and Fracture Peculiarities of Polypropylene-Based Functionally Graded Materials Manufactured via Injection Molding
来源期刊：International Polymer ProcessingDOI：10.3139/217.3784
The Effect of Ultraviolet Ageing on the Flame Retardancy, Thermal Stability and Mechanical Properties of LGFPP/IFR
来源期刊：International Polymer ProcessingDOI：10.3139/217.3707
Study of Melt Spinning Processing Conditions for a Polyacrylonitrile Copolymer with a Water/Ethanol Mixture as a Plasticizer
来源期刊：International Polymer ProcessingDOI：10.3139/217.3847
Theoretical and Experimental Studies on Tribological Behavior of Luffa Fiber Reinforced Polyester under the Influence of Surface Treatment
来源期刊：International Polymer ProcessingDOI：10.3139/217.3629
Synthesis of a Novel Ladder Poly(azomethine-ester) Based on PET Waste Bottles
来源期刊：International Polymer ProcessingDOI：10.3139/217.3595
Thermal, Tensile, Electrical, Dynamic Mechanical Thermal and Rheological Properties of Polyvinylidene Fluoride and Fluoroelastomer Composites Filled with Carbon Black
来源期刊：International Polymer ProcessingDOI：10.3139/217.3588
Influence of Post-Treatment Media on Morphological Changes in Transient Macromolecules of Polymeric Fibers
来源期刊：International Polymer ProcessingDOI：10.3139/217.3793
Enhancing Flame Retardancy, Thermal Stability, Physical and Mechanical Properties of Polyethylene Foam with Polyphosphate Modified Expandable Graphite and Ammonium Polyphosphate
来源期刊：International Polymer ProcessingDOI：10.3139/217.3714
Fabrication of Double-Sided Micro-Lens Array Using UV Injection Molding
来源期刊：International Polymer ProcessingDOI：10.3139/217.3633
Simulations of Heat Transfer in Thermoplastic Injection Molds Manufactured by Additive Techniques
来源期刊：International Polymer ProcessingDOI：10.3139/217.3594
Partially Filled Flow Simulation Using Meshfree Method for High Viscosity Fluid in Plastic Mixer
来源期刊：International Polymer ProcessingDOI：10.3139/217.3727
Three-Dimensional, Non-Isothermal Simulations of the Effect of Speed Ratio in Partially-Filled Rubber Mixing
来源期刊：International Polymer ProcessingDOI：10.3139/217.3680
The Influence of Mechanical Recycling on Properties in Injection Molding of Fiber-Reinforced Polypropylene
来源期刊：International Polymer ProcessingDOI：10.3139/217.3770
Influence of the Mold Temperature and Part Thickness on the Replication Quality and Molecular Orientation in Compression Injection Molding of Polystyrene
来源期刊：International Polymer ProcessingDOI：10.3139/217.3802
Preparation and Characterization of a Biocomposite Based on Cork Microparticles in Poly(β-hydroxybutyrate)-co-Poly(β-hydroxyvalerate) Matrix
来源期刊：International Polymer ProcessingDOI：10.3139/217.3713
A Closer Look at the Bonding Capacity of Thick Metal-Plastic Hybrids
来源期刊：International Polymer ProcessingDOI：10.3139/217.3654
UV Pre-Treatment for Polycarbonate for Bonding LSR in a Multi-Component Injection Molding Process
来源期刊：International Polymer ProcessingDOI：10.3139/217.3509
Processing LDS-Circuit Boards by Selective Laser Sintering
来源期刊：International Polymer ProcessingDOI：10.3139/217.3670
Could Alfa Fibers Substitute Glass Fibers in Composite Materials?
来源期刊：International Polymer ProcessingDOI：10.3139/217.3652
Effect of Annealing Temperature on PP Microporous Membranes Obtained by a Melt-Extrusion-Stretching Method
来源期刊：International Polymer ProcessingDOI：10.3139/217.3774
Influence of Rubber Ratio and Crosslinking Agent on Mechanical Properties, Crystallization and Rheological Behaviors of EPDM/PP Thermoplastic Elastomer
来源期刊：International Polymer ProcessingDOI：10.3139/217.3817
Influence of Process Parameters on the Morphologies of Micro-Injection Molded Polyformaldehyde Parts
来源期刊：International Polymer ProcessingDOI：10.3139/217.3776
Simulation-Based Approach for Probing Rheology-Processing-Structure Relationships in Foam Blow Molding
来源期刊：International Polymer ProcessingDOI：10.3139/217.3801
Preparation and Properties of Functionalized Lignin-Modified Polyvinyl Alcohol
来源期刊：International Polymer ProcessingDOI：10.3139/217.3841
