The past few decades have seen outstanding advances in the use of composite materials in structural applications. There can be little doubt that, within engineering circles, composites have revolutionised traditional design concepts and made possible an unparalleled range of new and exciting possibilities as viable materials for construction. Composite Structures, an International Journal, disseminates knowledge between users, manufacturers, designers and researchers involved in structures or structural components manufactured using composite materials.The journal publishes papers which contribute to knowledge in the use of composite materials in engineering structures. Papers deal with design, research and development studies, experimental investigations, theoretical analysis and fabrication techniques relevant to the application of composites in load-bearing components for assemblies, ranging from individual components such as plates and shells to complete composite structures.
在过去的几十年里，复合材料在结构应用中取得了显著的进步。毫无疑问，在工程界，复合材料已经彻底改变了传统的设计概念，并使一系列前所未有的新的和令人兴奋的可能性成为可能的可行的建筑材料。《复合材料结构》是一本国际性杂志，在使用者、制造商、设计师和研究人员之间传播使用复合材料制造的结构或结构部件的知识。该杂志发表的论文有助于了解复合材料在工程结构中的使用。论文涉及与复合材料在组件承载部件中的应用有关的设计、研究和开发研究、实验研究、理论分析和制造技术，范围从单个部件如板和壳到完整的复合材料结构。
An automatic and intelligent optimal surface modeling method for composite tunnel structures
来源期刊：Composite StructuresDOI：10.1016/J.COMPSTRUCT.2018.09.082
Multi-phase modelling of electrochemical rehabilitation for ASR and chloride affected concrete composites
来源期刊：Composite StructuresDOI：10.1016/J.COMPSTRUCT.2018.09.063
Impact resistance and damage tolerance of fiber reinforced composites: A review
来源期刊：Composite StructuresDOI：10.1016/J.COMPSTRUCT.2019.03.021
Free vibration analysis of axisymmetric functionally graded doubly-curved shells with un-uniform thickness distribution based on Ritz method
来源期刊：Composite StructuresDOI：10.1016/J.COMPSTRUCT.2019.111145
Impact and compression after impact response in thin laminates of spread-tow woven and non-crimp fabrics
来源期刊：Composite StructuresDOI：10.1016/J.COMPSTRUCT.2019.02.054
Lightweight cellular metal composites with zero and tunable thermal expansion enabled by ultrasonic additive manufacturing: Modeling, manufacturing, and testing
来源期刊：Composite StructuresDOI：10.1016/J.COMPSTRUCT.2019.02.031
Performance of hybrid carbon and basalt FRP sheets in strengthening concrete beams in flexure
来源期刊：Composite StructuresDOI：10.1016/J.COMPSTRUCT.2019.111337
Structural modeling and mechanical characterizing of three-dimensional four-step braided composites: A review
来源期刊：Composite StructuresDOI：10.1016/J.COMPSTRUCT.2018.09.065
Postbuckling analysis of bi-directional functionally graded imperfect beams based on a novel third-order shear deformation theory
来源期刊：Composite StructuresDOI：10.1016/J.COMPSTRUCT.2018.10.106
Structural response of cement-bonded wood composite panels as permanent formwork
来源期刊：Composite StructuresDOI：10.1016/J.COMPSTRUCT.2018.10.079
Damage imaging of composite structures using multipath scattering Lamb waves
来源期刊：Composite StructuresDOI：10.1016/J.COMPSTRUCT.2019.03.008
Understanding progressive failure mechanisms of a wind turbine blade trailing edge section through subcomponent tests and nonlinear FE analysis
来源期刊：Composite StructuresDOI：10.1016/J.COMPSTRUCT.2019.02.024
An isogeometric approach to topology optimization of spatially graded hierarchical structures
来源期刊：Composite StructuresDOI：10.1016/J.COMPSTRUCT.2019.111171
Effect of fiber architecture on tensile fracture of 3D woven textile composites
来源期刊：Composite StructuresDOI：10.1016/J.COMPSTRUCT.2019.111139
Direct shear tests of glass fiber reinforced polymer connectors for use in precast concrete sandwich panels
来源期刊：Composite StructuresDOI：10.1016/J.COMPSTRUCT.2018.09.017
Uniaxial compression mechanical properties and fracture characteristics of brucite fiber reinforced cement-based composites
来源期刊：Composite StructuresDOI：10.1016/J.COMPSTRUCT.2019.01.030
Comparison of numerical modelling techniques for impact investigation on a wind turbine blade
来源期刊：Composite StructuresDOI：10.1016/J.COMPSTRUCT.2018.11.001
Nonlinear resonant behaviors of bi-directional functionally graded material microbeams: One-/two-parameter bifurcation analyses
来源期刊：Composite StructuresDOI：10.1016/J.COMPSTRUCT.2019.110896
Theoretical and numerical analyses of composite cylinders subjected to the low velocity impact
来源期刊：Composite StructuresDOI：10.1016/J.COMPSTRUCT.2019.111230
Isogeometric size optimization of bi-directional functionally graded beams under static loads
来源期刊：Composite StructuresDOI：10.1016/J.COMPSTRUCT.2019.111259
Mechanical properties of 3-D printed truss-like lattice biopolymer non-stochastic structures for sandwich panels with natural fibre composite skins
来源期刊：Composite StructuresDOI：10.1016/J.COMPSTRUCT.2019.01.103
Central tearing behaviors of PVC coated fabrics with initial notch
来源期刊：Composite StructuresDOI：10.1016/J.COMPSTRUCT.2018.09.104
Microscopic analysis of failure in woven carbon fabric laminates coupled with digital image correlation and acoustic emission
来源期刊：Composite StructuresDOI：10.1016/j.compstruct.2019.111515
Local and global prediction on stress-strain behavior of FRP-confined square concrete sections
来源期刊：Composite StructuresDOI：10.1016/J.COMPSTRUCT.2019.111205
Electro-elastic response of cylindrical sandwich pressure vessels with porous core and piezoelectric face-sheets
来源期刊：Composite StructuresDOI：10.1016/J.COMPSTRUCT.2019.111119
A novel implementation of asymptotic homogenization for viscoelastic composites with periodic microstructures
来源期刊：Composite StructuresDOI：10.1016/J.COMPSTRUCT.2018.09.056
Structural design and manufacturing process of a low scale bio-inspired wind turbine blades
来源期刊：Composite StructuresDOI：10.1016/J.COMPSTRUCT.2018.08.061
Deep drawing of fiber metal laminates for automotive lightweight structures
来源期刊：Composite StructuresDOI：10.1016/J.COMPSTRUCT.2019.02.047
Monitoring the drilling process of GFRP laminates with carbon nanotube buckypaper sensor
来源期刊：Composite StructuresDOI：10.1016/J.COMPSTRUCT.2018.10.016
Effect of the platelet size on the fracturing behavior and size effect of discontinuous fiber composite structures
来源期刊：Composite StructuresDOI：10.1016/J.COMPSTRUCT.2019.111245
Numerical and experimental study of shear stress behavior of NBR and ASTM standard test specimens for FRP-wood bonds
来源期刊：Composite StructuresDOI：10.1016/J.COMPSTRUCT.2019.111066
Flexural properties evaluation of carbon-fiber fabric reinforced poplar/eucalyptus composite plywood formwork
来源期刊：Composite StructuresDOI：10.1016/J.COMPSTRUCT.2019.111073
Sound transmission loss of double-wall piezoelectric plate made of functionally graded materials via third-order shear deformation theory
来源期刊：Composite StructuresDOI：10.1016/J.COMPSTRUCT.2019.03.040
Flexural behavior of basalt fiber-reinforced concrete slab strips reinforced with BFRP and GFRP bars
来源期刊：Composite StructuresDOI：10.1016/J.COMPSTRUCT.2018.12.016
Parametric study of the effect of wrinkle features on the strength of a tapered wind turbine blade sub-structure
来源期刊：Composite StructuresDOI：10.1016/J.COMPSTRUCT.2019.02.065
Steel columns strengthened/reinforced by prestressed CFRP strips: Concepts and behaviors under axial compressive loads
来源期刊：Composite StructuresDOI：10.1016/J.COMPSTRUCT.2019.03.038
Impact property of TiAl3–Ti laminated composite fabricated from metallic sandwich
来源期刊：Composite StructuresDOI：10.1016/j.compstruct.2019.111379
Stress analysis and strength prediction of composite laminates with two interacting holes
来源期刊：Composite StructuresDOI：10.1016/J.COMPSTRUCT.2019.04.041
Deflection determination method for BFRP prestressed concrete beams under fatigue loading
来源期刊：Composite StructuresDOI：10.1016/J.COMPSTRUCT.2019.111182
A hybrid approach for global sensitivity analysis of FRP composite multi-bolt joints
来源期刊：Composite StructuresDOI：10.1016/J.COMPSTRUCT.2018.09.085
A multi-scale method for predicting ABD stiffness matrix of single-ply weave-reinforced composite
来源期刊：Composite StructuresDOI：10.1016/j.compstruct.2019.111478
Manufacturing uncertainties and resulting robustness of optimized patch positions on continuous-discontinuous fiber reinforced polymer structures
来源期刊：Composite StructuresDOI：10.1016/J.COMPSTRUCT.2019.01.063
Damage detection and location in woven fabric CFRP laminate panels
来源期刊：Composite StructuresDOI：10.1016/J.COMPSTRUCT.2019.03.087
Local buckling analysis of periodic sinusoidal corrugated composite panels under uniaxial compression
来源期刊：Composite StructuresDOI：10.1016/J.COMPSTRUCT.2019.03.050
Quasi-static and dynamic response of oriented strand boards based on balsa wood waste
来源期刊：Composite StructuresDOI：10.1016/J.COMPSTRUCT.2019.03.062
Damage and damping of short-glass-fibre-reinforced PBT composites under dynamic conditions: Effect of matrix behaviour
来源期刊：Composite StructuresDOI：10.1016/J.COMPSTRUCT.2019.111286
An application of non-ordinary state-based peridynamics theory in cutting process modelling of unidirectional carbon fiber reinforced polymer material
来源期刊：Composite StructuresDOI：10.1016/J.COMPSTRUCT.2019.111194
A simple yet accurate method to model the effective elastic and transport properties of particulate and fiber composites
来源期刊：Composite StructuresDOI：10.1016/J.COMPSTRUCT.2018.11.010
Prediction of non-linear mechanical behavior of shear deformed twill woven composites based on a multi-scale progressive damage model
来源期刊：Composite StructuresDOI：10.1016/J.COMPSTRUCT.2019.111019
Robust characterization of crack propagation in 3D woven composites and evidences of size dependency
来源期刊：Composite StructuresDOI：10.1016/J.COMPSTRUCT.2019.111175
