Engineering Failure Analysis publishes research papers describing the analysis of engineering failures and related studies.Papers relating to the structure, properties and behaviour of engineering materials are encouraged, particularly those which also involve the detailed application of materials parameters to problems in engineering structures, components and design. In addition to the area of materials engineering, the interacting fields of mechanical, manufacturing, aeronautical, civil, chemical, corrosion and design engineering are considered relevant. Activity should be directed at analysing engineering failures and carrying out research to help reduce the incidences of failures and to extend the operating horizons of engineering materials.Emphasis is placed on the mechanical properties of materials and their behaviour when influenced by structure, process and environment. Metallic, polymeric, ceramic and natural materials are all included and the application of these materials to real engineering situations should be emphasised. The use of a case-study based approach is also encouraged.Engineering Failure Analysis provides essential reference material and critical feedback into the design process thereby contributing to the prevention of engineering failures in the future. All submissions will be subject to peer review from leading experts in the field.
《工程失效分析》发表有关工程失效分析和相关研究的论文。鼓励发表与工程材料的结构、性质和行为有关的论文，特别是涉及材料参数在工程结构、部件和设计问题中的详细应用的论文。除了材料工程领域外，机械、制造、航空、民用、化学、腐蚀和设计工程等相互作用的领域也被认为是相关的。活动应针对分析工程故障和开展研究，以帮助减少故障发生率和扩大工程材料的使用范围。重点放在材料的机械性能及其受结构、工艺和环境影响时的行为。金属、聚合物、陶瓷和天然材料都包括在内，应强调这些材料在实际工程中的应用。工程失败分析为设计过程提供了重要的参考资料和重要的反馈，从而有助于防止未来的工程失败。所有提交的材料都将接受该领域领先专家的同行评审。
Damage assessment and collapse investigation of three historical masonry palaces under seismic actions
来源期刊：Engineering Failure AnalysisDOI：10.1016/J.ENGFAILANAL.2019.01.066
Defects as a root cause of fatigue failure of metallic components. I: Basic aspects
来源期刊：Engineering Failure AnalysisDOI：10.1016/J.ENGFAILANAL.2019.01.055
Residual stress measurement by strain gauge and X-ray diffraction method in different shaped rails
来源期刊：Engineering Failure AnalysisDOI：10.1016/J.ENGFAILANAL.2018.10.016
Stress corrosion crack evaluation of super 13Cr tubing in high-temperature and high-pressure gas wells
来源期刊：Engineering Failure AnalysisDOI：10.1016/J.ENGFAILANAL.2018.09.030
Shattered Rim and Shelling of High-Speed Railway Wheels in The Very-High-Cycle Fatigue Regime Under Rolling Contact Loading
来源期刊：Engineering Failure AnalysisDOI：10.1016/J.ENGFAILANAL.2019.01.047
An investigation into the effect of surface integrity on the fatigue failure of AISI 4340 steel in different drilling strategies
来源期刊：Engineering Failure AnalysisDOI：10.1016/J.ENGFAILANAL.2018.08.022
Investigations into reliability, maintainability and availability of tunnel boring machine operating in mixed ground condition using Markov chains
来源期刊：Engineering Failure AnalysisDOI：10.1016/J.ENGFAILANAL.2019.07.013
Relationship between microstructural features in pipeline steel and hydrogen assisted degradation
来源期刊：Engineering Failure AnalysisDOI：10.1016/J.ENGFAILANAL.2018.11.008
Corrosion fatigue failure of steam turbine moving blades: A case study
来源期刊：Engineering Failure AnalysisDOI：10.1016/J.ENGFAILANAL.2019.08.002
Failure analysis of a superheater tube ruptured in a power plant boiler: Main causes and preventive strategies
来源期刊：Engineering Failure AnalysisDOI：10.1016/J.ENGFAILANAL.2019.01.016
A semi-empirical model for structural integrity assessment of defected high density polyethylene pipes
来源期刊：Engineering Failure AnalysisDOI：10.1016/J.ENGFAILANAL.2019.02.045
Selection of key indicators for reputation loss in oil and gas pipeline failure event
来源期刊：Engineering Failure AnalysisDOI：10.1016/J.ENGFAILANAL.2019.01.071
Failure analysis of an un-anchored steel oil tank damaged during the Silakhor earthquake of 2006 in Iran
来源期刊：Engineering Failure AnalysisDOI：10.1016/J.ENGFAILANAL.2018.09.031
Effect of microstructure and temperature on the stress corrosion cracking of two microalloyed pipeline steels in H2S environment for gas transport
来源期刊：Engineering Failure AnalysisDOI：10.1016/J.ENGFAILANAL.2019.06.028
Construction practice of landslide during tunneling in hilly topography
来源期刊：Engineering Failure AnalysisDOI：10.1016/J.ENGFAILANAL.2019.07.064
Short-period corrosion of X80 pipeline steel induced by AC current in acidic red soil
来源期刊：Engineering Failure AnalysisDOI：10.1016/J.ENGFAILANAL.2019.07.014
Failure of electric resistance welded API pipes – Effect of centre line segregation
来源期刊：Engineering Failure AnalysisDOI：10.1016/J.ENGFAILANAL.2018.10.018
Inspections, statistical and reliability assessment study of corroded pipeline
来源期刊：Engineering Failure AnalysisDOI：10.1016/J.ENGFAILANAL.2019.02.012
Fatigue characterization of a beam-to-column riveted joint
来源期刊：Engineering Failure AnalysisDOI：10.1016/J.ENGFAILANAL.2019.04.073
Assessment of usability of the exploited gas turbine blade heat-resistant coatings
来源期刊：Engineering Failure AnalysisDOI：10.1016/J.ENGFAILANAL.2019.07.016
Experimental analysis and detailed micro-modeling of masonry walls subjected to in-plane shear
来源期刊：Engineering Failure AnalysisDOI：10.1016/J.ENGFAILANAL.2018.08.030
Fatigue performance of rib-to-deck double-side welded joints in orthotropic steel decks
来源期刊：Engineering Failure AnalysisDOI：10.1016/J.ENGFAILANAL.2019.07.015
Bulging rupture and caustic corrosion of a boiler tube in a thermal power plant
来源期刊：Engineering Failure AnalysisDOI：10.1016/J.ENGFAILANAL.2019.06.022
Failure mechanism of reinforced concrete subjected to projectile impact loading
来源期刊：Engineering Failure AnalysisDOI：10.1016/J.ENGFAILANAL.2018.11.006
Forecast of the remaining lifetime of steel cord conveyor belts based on regression methods in damage analysis identified by subsequent DiagBelt scans
来源期刊：Engineering Failure AnalysisDOI：10.1016/J.ENGFAILANAL.2019.02.039
Probable cause of damage to the panel of microalgae bioreactor building façade: Hypothetical evaluation
来源期刊：Engineering Failure AnalysisDOI：10.1016/J.ENGFAILANAL.2019.02.060
Failure analysis of a crankshaft of a helicopter engine
来源期刊：Engineering Failure AnalysisDOI：10.1016/J.ENGFAILANAL.2019.01.072
Bayesian prediction and probabilistic model of fatigue cracks in steel structures
来源期刊：Engineering Failure AnalysisDOI：10.1016/J.ENGFAILANAL.2019.04.061
Research on the thermo-elastic deformation and fracture mechanism of the slipper retainer in the axial piston pumps and motors
来源期刊：Engineering Failure AnalysisDOI：10.1016/J.ENGFAILANAL.2019.02.041
An estimation of fatigue crack initiation and growth lives of Al 2024-T3 in double lap bolted joints with interference fitted holes
来源期刊：Engineering Failure AnalysisDOI：10.1016/J.ENGFAILANAL.2019.07.054
Creep embrittlement in aged HP-Mod alloy reformer tubes
来源期刊：Engineering Failure AnalysisDOI：10.1016/J.ENGFAILANAL.2019.02.022
Failure analysis on the axial-connected bolts of the thin-walled cylinder under random vibration loading
来源期刊：Engineering Failure AnalysisDOI：10.1016/J.ENGFAILANAL.2019.06.043
Reflectance Transformation Imaging as a tool for engineering failure analysis
来源期刊：Engineering Failure AnalysisDOI：10.1016/J.ENGFAILANAL.2019.07.037
Failure analysis of shot–sleeves used in brass high pressure die–casting process
来源期刊：Engineering Failure AnalysisDOI：10.1016/J.ENGFAILANAL.2019.05.038
Thermoelectric effect of wear of alloy bearing
来源期刊：Engineering Failure AnalysisDOI：10.1016/J.ENGFAILANAL.2019.04.030
Failure analysis of AISI 410 stainless-steel piston rod in spillway floodgate
来源期刊：Engineering Failure AnalysisDOI：10.1016/J.ENGFAILANAL.2019.01.035
Finite element analysis on mechanical behavior of semi-exposed pipeline subjected to debris flows
来源期刊：Engineering Failure AnalysisDOI：10.1016/J.ENGFAILANAL.2019.06.055
Influence of heating and cooling rate on the stress state of the brick lining in a rotary kiln using finite element simulations
来源期刊：Engineering Failure AnalysisDOI：10.1016/J.ENGFAILANAL.2019.06.031
Failure intensity of offshore power plants under varying maintenance policies
来源期刊：Engineering Failure AnalysisDOI：10.1016/J.ENGFAILANAL.2019.01.011
Steel components for packaging devices in sliding/rolling contact: Metallurgical failure analysis
来源期刊：Engineering Failure AnalysisDOI：10.1016/J.ENGFAILANAL.2019.04.055
Efficient self-control device based on inspection model for Pitot sensors system
来源期刊：Engineering Failure AnalysisDOI：10.1016/J.ENGFAILANAL.2019.04.017
The fatigue strength of bidirectionally bent steel cord used in tyres
来源期刊：Engineering Failure AnalysisDOI：10.1016/J.ENGFAILANAL.2019.06.038
Microbiologically influenced corrosion of 70/30 cupronickel tubes of a heat-exchanger
来源期刊：Engineering Failure AnalysisDOI：10.1016/J.ENGFAILANAL.2019.08.005
Fatigue redesign of failed sub frame using stress measuring, FEA and British Standard 7608
来源期刊：Engineering Failure AnalysisDOI：10.1016/J.ENGFAILANAL.2019.01.032
Development and validation of failure preventive tools for aeronautical applications
来源期刊：Engineering Failure AnalysisDOI：10.1016/J.ENGFAILANAL.2019.03.021
Study of the variation of contact state near the contact boundary in a dovetail attachment under different loads
来源期刊：Engineering Failure AnalysisDOI：10.1016/J.ENGFAILANAL.2019.07.025
Numerical investigation of galling in a press hardening experiment with AlSi-coated workpieces
来源期刊：Engineering Failure AnalysisDOI：10.1016/J.ENGFAILANAL.2019.01.059
The survival probability of shafts and shaft-hub connections
来源期刊：Engineering Failure AnalysisDOI：10.1016/J.ENGFAILANAL.2019.05.007
Computational assessment of nonlinear fracture resistance parameters for cracked fuselage panel under biaxial loading
来源期刊：Engineering Failure AnalysisDOI：10.1016/J.ENGFAILANAL.2019.06.061
Computational analysis via FEM of Tirefond screws used in the fastening system of railroads aiming to avoid a recurrent failure case
来源期刊：Engineering Failure AnalysisDOI：10.1016/j.engfailanal.2019.104186
