Bulletin of Earthquake Engineering presents original, peer-reviewed papers on research related to the broad spectrum of earthquake engineering. The journal offers a forum for presentation and discussion of such matters as European damaging earthquakes, new developments in earthquake regulations, and national policies applied after major seismic events, including strengthening of existing buildings.Coverage includes seismic hazard studies and methods for mitigation of risk; earthquake source mechanism and strong motion characterization and their use for engineering applications; geological and geotechnical site conditions under earthquake excitations; cyclic behavior of soils; analysis and design of earth structures and foundations under seismic conditions; zonation and microzonation methodologies; earthquake scenarios and vulnerability assessments; earthquake codes and improvements, and much more.This is the Official Publication of the European Association for Earthquake Engineering.
《地震工程通报》介绍了有关地震工程广谱研究的原创、同行评审论文。该杂志提供了一个论坛，介绍和讨论诸如欧洲破坏性地震、地震条例的新发展、重大地震事件后适用的国家政策，包括加固现有建筑物等问题。报道内容包括地震危害研究和减轻风险的方法;震源机制和强震动特征及其在工程应用中的用途;地震激励下的地质和岩土工程现场条件;土壤的循环特性;在地震条件下分析和设计土结构和基础;分区和小区方法;地震设想和脆弱性评估;地震规范和改进，等等。这是欧洲地震工程协会的官方出版物。
Local site effects estimation at Amatrice (Central Italy) through seismological methods
来源期刊：Bulletin of Earthquake EngineeringDOI：10.1007/s10518-019-00587-3
Seismic design and retrofit of frame structures with hysteretic dampers: a simplified displacement-based procedure
来源期刊：Bulletin of Earthquake EngineeringDOI：10.1007/s10518-019-00558-8
Analytical and numerical seismic assessment of heritage masonry towers
来源期刊：Bulletin of Earthquake EngineeringDOI：10.1007/s10518-019-00732-y
Comparison of methods to develop risk-targeted seismic design maps
来源期刊：Bulletin of Earthquake EngineeringDOI：10.1007/s10518-019-00629-w
Predictive model for seismic vulnerability assessment of churches based on the 2009 L’Aquila earthquake
来源期刊：Bulletin of Earthquake EngineeringDOI：10.1007/s10518-019-00656-7
A plastic-damage hysteretic model to reproduce strength stiffness degradation
来源期刊：Bulletin of Earthquake EngineeringDOI：10.1007/s10518-019-00606-3
Validation and extension of a statistical usability model for unreinforced masonry buildings with different ground motion intensity measures
来源期刊：Bulletin of Earthquake EngineeringDOI：10.1007/s10518-019-00669-2
Assessing and quantifying the earthquake response of reinforced concrete buckling-restrained brace frame structures
来源期刊：Bulletin of Earthquake EngineeringDOI：10.1007/s10518-019-00633-0
In-plane behaviour of clay brick masonry wallettes retrofitted with single-sided fabric-reinforced cementitious matrix and deep mounted carbon fibre strips
来源期刊：Bulletin of Earthquake EngineeringDOI：10.1007/s10518-019-00596-2
Estimation of seismic response parameters and capacity of irregular tunnel-form buildings
来源期刊：Bulletin of Earthquake EngineeringDOI：10.1007/s10518-019-00679-0
Dynamic soil properties and liquefaction potential of northeast Indian soil for non-linear effective stress analysis
来源期刊：Bulletin of Earthquake EngineeringDOI：10.1007/s10518-019-00592-6
Seismic assessment of nineteenth and twentieth centuries URM buildings in Lisbon: structural features and derivation of fragility curves
来源期刊：Bulletin of Earthquake EngineeringDOI：10.1007/s10518-019-00618-z
Quantifying the effects of various uncertainties on seismic risk assessment of CFS structures
来源期刊：Bulletin of Earthquake EngineeringDOI：10.1007/s10518-019-00726-w
A universal approach for evaluating earthquake safety level based on societal fatality risk
来源期刊：Bulletin of Earthquake EngineeringDOI：10.1007/s10518-019-00727-9
Which is a better proxy, site period or depth to bedrock, in modelling linear site response in addition to the average shear-wave velocity?
来源期刊：Bulletin of Earthquake EngineeringDOI：10.1007/s10518-019-00738-6
Experimental and applied element modeling of masonry walls retrofitted with near surface mounted (NSM) reinforcing steel bars
来源期刊：Bulletin of Earthquake EngineeringDOI：10.1007/s10518-019-00607-2
Seismic fragility of buried steel natural gas pipelines due to axial compression at geotechnical discontinuities
来源期刊：Bulletin of Earthquake EngineeringDOI：10.1007/s10518-019-00736-8
V–H–M seismic capacity envelopes of strip foundations on slopes for capacity design of structure-foundation system
来源期刊：Bulletin of Earthquake EngineeringDOI：10.1007/s10518-019-00577-5
Significance of non-stationary characteristics of ground-motion on structural damage: shaking table study
来源期刊：Bulletin of Earthquake EngineeringDOI：10.1007/s10518-019-00668-3
Collapse fragility analysis of self-centering precast concrete walls with different post-tensioning and energy dissipation designs
来源期刊：Bulletin of Earthquake EngineeringDOI：10.1007/s10518-019-00591-7
HSM: a synthetic damage-constrained seismic hazard parameter
来源期刊：Bulletin of Earthquake EngineeringDOI：10.1007/s10518-019-00677-2
Rapid screening method for the determination of seismic vulnerability assessment of RC building stocks
来源期刊：Bulletin of Earthquake EngineeringDOI：10.1007/s10518-019-00751-9
Validation of stochastic ground motion model modification by comparison to seismic demand of recorded ground motions
来源期刊：Bulletin of Earthquake EngineeringDOI：10.1007/s10518-019-00571-x
Base shear determination using response-spectrum modal analysis of multi-degree-of-freedom systems with soil–structure interaction
来源期刊：Bulletin of Earthquake EngineeringDOI：10.1007/s10518-019-00612-5
Earthquake damage assessment of 1-story precast industrial buildings using damage probability matrices
来源期刊：Bulletin of Earthquake EngineeringDOI：10.1007/s10518-019-00660-x
Assessment of post-liquefaction consolidation settlement
来源期刊：Bulletin of Earthquake EngineeringDOI：10.1007/s10518-019-00695-0
Suitable intensity measure for probabilistic seismic risk assessment of non-ductile Australian reinforced concrete buildings
来源期刊：Bulletin of Earthquake EngineeringDOI：10.1007/s10518-019-00632-1
Application of seismic design procedures on three modern URM buildings struck by the 2012 Emilia earthquakes: inconsistencies and improvement proposals in the European codes
来源期刊：Bulletin of Earthquake EngineeringDOI：10.1007/s10518-019-00650-z
Regional stochastic ground-motion model for low to moderate seismicity area with variable seismotectonic: application to Peninsular India
来源期刊：Bulletin of Earthquake EngineeringDOI：10.1007/s10518-019-00646-9
Two-dimensional in-plane seismic response of long-span bridges under oblique P-wave incidence
来源期刊：Bulletin of Earthquake EngineeringDOI：10.1007/s10518-019-00664-7
The fixed-strut-angle finite element (FSAFE) model for reinforced concrete structural walls
来源期刊：Bulletin of Earthquake EngineeringDOI：10.1007/s10518-019-00641-0
Composite steel beam database for seismic design and performance assessment of composite-steel moment-resisting frame systems
来源期刊：Bulletin of Earthquake EngineeringDOI：10.1007/s10518-019-00564-w
On the fibre modelling of beams in RC framed buildings with rigid diaphragm
来源期刊：Bulletin of Earthquake EngineeringDOI：10.1007/s10518-019-00723-z
Displacement ratios for structures with material degradation and foundation uplift
来源期刊：Bulletin of Earthquake EngineeringDOI：10.1007/s10518-019-00653-w
Forming new steel-framed openings in load-bearing masonry walls: design methods and nonlinear finite element simulations
来源期刊：Bulletin of Earthquake EngineeringDOI：10.1007/s10518-018-00538-4
Analytical modeling of corroded RC columns considering flexure-shear interaction for seismic performance assessment
来源期刊：Bulletin of Earthquake EngineeringDOI：10.1007/s10518-019-00770-6
Loading tests of a brace-type multi-unit friction damper using coned disc springs and numerical assessment of its seismic response control effects
来源期刊：Bulletin of Earthquake EngineeringDOI：10.1007/s10518-019-00671-8
Evaluating seismic risk in small and medium-sized cities with the modified vulnerability index method, a case study in Jiangyou City, China
来源期刊：Bulletin of Earthquake EngineeringDOI：10.1007/s10518-019-00757-3
Generation of seed-based spectrum-compatible pulse-like time-series
来源期刊：Bulletin of Earthquake EngineeringDOI：10.1007/s10518-019-00773-3
Study on the accuracy of practical functions for R/C wall by a developed database of experimental test results
来源期刊：Bulletin of Earthquake EngineeringDOI：10.1007/s10518-019-00691-4
Influence of slab spatial composite effect on dynamic behaviour of composite frame structures under earthquake excitation
来源期刊：Bulletin of Earthquake EngineeringDOI：10.1007/s10518-019-00568-6
Strut-and-tie model for shear strength prediction of RC exterior beam–column joints under seismic loading
来源期刊：Bulletin of Earthquake EngineeringDOI：10.1007/s10518-019-00756-4
Comparing the performance of traditional shear-wall and rocking shear-wall structures designed using the direct-displacement based design approach
来源期刊：Bulletin of Earthquake EngineeringDOI：10.1007/s10518-019-00740-y
The shear pin strength of friction pendulum bearings (FPB) in simply supported railway bridges
来源期刊：Bulletin of Earthquake EngineeringDOI：10.1007/s10518-019-00698-x
Correction to: On the role played by the openings on the first frequency of historic masonry towers
来源期刊：Bulletin of Earthquake EngineeringDOI：10.1007/s10518-019-00674-5
Acknowledgement of Reviewers for 2018
来源期刊：Bulletin of Earthquake EngineeringDOI：10.1007/s10518-019-00557-9
Parametric study of seismic collapse performance of lightweight buildings with spherical deformable rolling isolation system
来源期刊：Bulletin of Earthquake EngineeringDOI：10.1007/s10518-019-00753-7
Evaluation of the displacement ductility for the seismic design of light-frame wood buildings
来源期刊：Bulletin of Earthquake EngineeringDOI：10.1007/s10518-019-00659-4
Seismic assessment of irregular masonry macro-elements through a nonlinear framed model: a case study
来源期刊：Bulletin of Earthquake EngineeringDOI：10.1007/s10518-019-00657-6
Seismic performance of end-bearing piled raft with countermeasure strategy against liquefaction using centrifuge model tests
来源期刊：Bulletin of Earthquake EngineeringDOI：10.1007/s10518-019-00696-z
